Texas Instruments
Texas Instruments Incorporated (TI) is a global semiconductor design and manufacturing company that develops analog ICs and embedded processors. By employing the worlds brightest minds, TI creates innovations that shape the future of technology. TI is helping more than 100,000 customers transform the future, today.
Series | Category | # Parts | Status | Description |
---|---|---|---|---|
Logic | 3 | 1 | This bus buffer gate is designed for 1.65-V to 5.5-V VCCoperation. The SN74LVC1G125-Q1 device is a single line driver with a 3-state output. The output is disabled when the output-enable (OE) input is high. The CMOS device has high output drive while maintaining low static power dissipation over a broad... Read More | |
Buffers, Drivers, Receivers, Transceivers | 1 | 1 | This single bus buffer gate is designed for 1.65-V to 5.5-V VCCoperation. The SN74LVC1G126 is a single line driver with a 3-state output. The output is disabled when the output-enable (OE) input is low. To ensure the high-impedance state during power up or power down, OE should be tied to... Read More | |
Logic | 2 | 1 | This single D-type flip-flop is designed for 1.65-V to 5.5-V VCCoperation. The SN74LVC1G175 has an asynchronous clear (CLR) input. WhenCLRis high, data from the input pin (D) is transferred to the output pin (Q) on the clock’s (CLK) rising edge. WhenCLRis low, Q is forced into the low state, regardless... Read More | |
Logic | 1 | 1 | This device is designed for 1.65-V to 5.5-V VCCoperation. The SN74LVC1G3208-Q1 is a single 3-input positive OR-AND gate. It performs the Boolean function Y = (A + B) ⋅ C in positive logic. By tying one input to GND or VCC, the SN74LVC1G3208-Q1 offers two more functions. When C is... Read More | |
Logic | 2 | 1 | This single D-type flip-flop is designed for 1.65-V to 5.5-V VCCoperation. The SN74LVC1G374 features a 3-state output designed specifically for driving highly capacitive or relatively low-impedance loads. This device is particularly suitable for implementing buffer registers, input/output (I/O) ports, bidirectional bus drivers, and working registers. On the positive transition of... Read More | |
Specialty Logic | 1 | 1 | The SN74LVC1GX04 is designed for 1.65-V to 5.5-V VCCoperation. This device incorporates the SN74LVC1GU04 (inverter with unbuffered output) and the SN74LVC1G04 (inverter) functions into a single device. The LVC1GX04 is optimized for use in crystal oscillator applications. X1 and X2 can be connected to a crystal or resonator in oscillator... Read More | |
Buffers, Drivers, Receivers, Transceivers | 2 | 1 | These octal bus buffers are designed for 1.65V to 3.6V VCC operation. The SN74LVC244A-Q1 devices are designed for asynchronous communication between data buses.
These octal bus buffers are designed for 1.65V to 3.6V VCC operation. The SN74LVC244A-Q1 devices are designed for asynchronous communication between data buses. | |
Texas InstrumentsCLVC257Automotive quadruple 2-line to 1-line data selector and multiplexer with tri-state outputs | Integrated Circuits (ICs) | 1 | 1 | The SN74LVC257A quadruple 2-line to 1-line data selector/multiplexer is designed for 2.7V to 3.6V VCC operation.
The SN74LVC257A quadruple 2-line to 1-line data selector/multiplexer is designed for 2.7V to 3.6V VCC operation. |
Integrated Circuits (ICs) | 1 | 10 | The SN74LVC2G125-Q1 is a dual bus buffer gate designed for 1.65-V to 5.5-V VCCoperation. This device features dual line drivers with 3-state outputs. The outputs are disabled when the associated output-enable (OE) input is high. To ensure the high-impedance state during power up or power down,OEshould be tied to VCCthrough... Read More | |
Integrated Circuits (ICs) | 1 | 1 | This dual bus buffer gate is designed for 1.65-V to 5.5-V VCCoperation. The SN74LVC2G126 is a dual bus driver/line driver with 3-state outputs. The outputs are disabled when the associated output-enable (OE) input is low. To ensure the high-impedance state during power up or power down, OE should be tied... Read More | |
Logic | 1 | 1 | Enhanced product 2-ch, 1.65-V to 5.5-V buffers with Schmitt-Trigger inputs | |
Texas InstrumentsCLVC2G74Automotive Catalog Single Positive-Edge-Triggered D-Type Flip-Flop with Clear and Preset | Logic | 1 | 1 | This single positive-edge-triggered D-type flip-flop is designed for 1.65-V to 5.5-V VCCoperation. A low level at the preset (PRE) or clear (CLR) input sets or resets the outputs, regardless of the levels of the other inputs. WhenPREandCLRare inactive (high), data at the data (D) input meeting the setup time requirements... Read More |
Texas InstrumentsCLVC374Automotive Catalog Octal Edge-Triggered D-Type Flip-Flops With 3-State Outputs | Logic | 2 | 1 | The SN74LVC374A octal edge-triggered D-type flip-flop is designed for 2.7-V to 3.6-V VCCoperation. This device features 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. This device is particularly suitable for implementing buffer registers, input/output (I/O) ports, bidirectional bus drivers, and working registers. On the positive transition... Read More |
Logic | 1 | 1 | This triple buffer/driver is designed for 1.65-V to 5.5-V VCCoperation. The output of the SN74LVC3G07 is open drain and can be connected to other open-drain outputs to implement active-low wired-OR or active-high wired-AND functions. The maximum sink current is 32 mA. This device is fully specified for partial-power-down applications using... Read More | |
Integrated Circuits (ICs) | 2 | 1 | The SN74LVC540A octal buffer/driver is designed for 2.7-V to 3.6-V VCCoperation. This device is ideal for driving bus lines or buffer-memory address registers. This device features inputs and outputs on opposite sides of the package that facilitate printed circuit board layout. The 3-state control gate is a 2-input AND gate... Read More | |
Integrated Circuits (ICs) | 2 | 1 | The SN74LVC541A octal buffer/driver is designed for 2.7-V to 3.6-V VCCoperation. The device is ideal for driving bus lines or buffering memory address registers. This device features inputs and outputs on opposite sides of the package to facilitate printed circuit board layout. The 3-state control gate is a 2-input AND... Read More | |
Logic | 2 | 1 | The SN74LVC573A octal transparent D-type latch is designed for 2.7-V to 3.6-V VCCoperation. This device features 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, input/output (I/O) ports, bidirectional bus drivers, and working registers. While the latch-enable (LE) input... Read More | |
Texas InstrumentsCLVC574Automotive Catalog Octal Edge-Triggered D-Type Flip-Flop With 3-State Outputs | Logic | 2 | 1 | The SN74LVC574A octal edge-triggered D-type flip-flop is designed for 2.7-V to 3.6-V VCCoperation. This device features 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. On the positive transition of the... Read More |
Texas InstrumentsCLVCC3245Enhanced Product Octal Bus Transceiver With Adjustable Output Voltage And 3-State Outputs | Integrated Circuits (ICs) | 3 | 1 | This 8-bit (octal) noninverting bus transceiver contains two separate supply rails. The B port is designed to track VCCB, which accepts voltages from 3 V to 5.5 V, and the A port is designed to track VCCA, which operates at 2.3 V to 3.6 V. This allows for translation from... Read More |
Texas InstrumentsCLVTH162244Enhanced product 16-ch, 2.7-V to 3.6-V buffers with bus-hold, TTL-compatible CMOS inputs and 3-state | Buffers, Drivers, Receivers, Transceivers | 1 | 1 | The SN74LVTH162244 is a 16-bit buffer and line driver designed for low-voltage (3.3-V) VCCoperation, but with the capability to provide a TTL interface to a 5-V system environment. This device can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. This device provides true outputs and... Read More |