Texas Instruments
Texas Instruments Incorporated (TI) is a global semiconductor design and manufacturing company that develops analog ICs and embedded processors. By employing the worlds brightest minds, TI creates innovations that shape the future of technology. TI is helping more than 100,000 customers transform the future, today.
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
Texas InstrumentsCDCVF2310High performance 1:10 clock buffer for general purpose applications with support up to 105C | Clock Buffers, Drivers | 4 | 1 | The CDCVF2310 device is a high-performance, low-skew clock buffer that operates up to 200 MHz. Two banks of five outputs each provide low-skew copies of CLK. After power up, the default state of the outputs is low regardless of the state of the control pins. For normal operation, the outputs... Read More |
| Clock/Timing | 3 | 1 | The CDCVF2310 is a high-performance, low-skew clock buffer that operates up to 200 MHz. Two banks of five outputs each provide low-skew copies of CLK. After power up, the default state of the outputs is low regardless of the state of the control pins. For normal operation, the outputs of... Read More | |
Texas InstrumentsCDCVF2505PLL clock driver for synch. DRAM & gen. purp. apps w/spread spectrum compatibility, power down mode | Clock/Timing | 8 | 1 | The CDCVF2505 is a high-performance, low-skew, low-jitter, phase-lock loop (PLL) clock driver. This device uses a PLL to precisely align the output clocks (1Y[0-3] and CLKOUT) to the input clock signal (CLKIN) in both frequency and phase. The CDCVF2505 operates at 3.3 V and also provides integrated series-damping resistors that... Read More |
Texas InstrumentsCDCVF2505-Q1Automotive PLL clock driver for synchronization, DRAM & gen-purpose apps with spread-spectrum compat | Clock Generators, PLLs, Frequency Synthesizers | 1 | 4 | The CDCVF2505 is a high-performance, low-skew, low-jitter, phase-lock loop (PLL) clock driver. It uses a PLL to precisely align, in both frequency and phase, the output clocks (1Y[0–3] and CLKOUT) to the input clock signal (CLKIN). The CDCVF2505 operates at 3.3 V. It also provides integrated series-damping resistors that make... Read More |
| Clock/Timing | 5 | 1 | The CDCVF2510A is a high-performance, low-skew, low-jitter, phase-lock loop (PLL) clock driver. The CDCVF2510A uses a phase-lock loop (PLL) to precisely align, in both frequency and phase, the feedback (FBOUT) output to the clock (CLK) input signal. It is specifically designed for use with synchronous DRAMs. The CDCVF2510A operates at... Read More | |
| Clock/Timing | 2 | 1 | The CDCVF2510A is a high-performance, low-skew, low-jitter, phase-lock loop (PLL) clock driver. The CDCVF2510A uses a phase-lock loop (PLL) to precisely align, in both frequency and phase, the feedback (FBOUT) output to the clock (CLK) input signal. It is specifically designed for use with synchronous DRAMs. The CDCVF2510A operates at... Read More | |
| Clock Generators, PLLs, Frequency Synthesizers | 4 | 1 | The CDCVF855 is a high-performance, low-skew, low-jitter, zero-delay buffer that distributes a differential clock input pair (CLK,CLK) to 4 differential pairs of clock outputs (Y[0:3],Y[0:3]) and one differential pair of feedback clock outputs (FBOUT,FBOUT). The clock outputs are controlled by the clock inputs (CLK,CLK), the feedback clocks (FBIN,FBIN), and the... Read More | |
| Integrated Circuits (ICs) | 2 | 1 | The CLC001 is a monolithic, high-speed cable driver designed for use in SMPTE 259M serial digital video and ITU-T G.703 serial digital data transmission applications. The CLC001 drives 75transmission lines (Belden 8281 or equivalent) at data rates up to 622 Mbps. Controlled output rise and fall times (400 ps typical)... Read More | |
| Integrated Circuits (ICs) | 6 | 1 | Texas Instruments' Comlinear CLC006 is a monolithic, high-speed cable driver designed for the SMPTE 259M serial digital video data transmission standard. The CLC006 drives 75Ω transmission lines (Belden 8281 or equivalent) at data rates up to 400 Mbps. Controlled output rise and fall times (650 ps typical) minimize transition-induced jitter.... Read More | |
| Integrated Circuits (ICs) | 4 | 1 | The Texas Instruments Comlinear CLC007 is a monolithic, high-speed cable driver designed for the SMPTE 259M serial digital video data transmission standard. The CLC007 drives 75Ω transmission lines (Belden 8281 or equivalent) at data rates up to 400 Mbps. Controlled output rise and fall times (750 ps typical) minimize transition-induced... Read More | |
| Serializers, Deserializers | 2 | 8 | The CLC020 SMPTE 259M Digital Video Serializer with Integrated Cable Driver is a monolithic integrated circuit that encodes, serializes and transmits bit-parallel digital data conforming to SMPTE 125M and SMPTE 267M component video and SMPTE 244M composite video standards. The CLC020 can also serialize other 8 or 10-bit parallel data.... Read More | |
| Interface | 1 | 1 | This 8-channel CMOS analog multiplexer and demultiplexer is designed for 1.65V to 5.5V VCC operation. The SN74LV4051A-Q1 handles analog and digital signals. Each channel permits signals with amplitudes up to 5.5V (peak) to be transmitted in either direction. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing... Read More | |
| Analog Switches, Multiplexers, Demultiplexers | 1 | 8 | These dual 4-channel CMOS analog multiplexers and demultiplexers are designed for 1.0V to 5.5V VCC operation. The SN7LV4052A-Q1 devices handle both analog and digital signals. Each channel permits signals with amplitudes up to 5.5V (peak). Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and... Read More | |
| Interface | 1 | 1 | This triple 2-channel CMOS analog multiplexer/demultiplexer is designed for 1.65V to 5.5V VCC operation. The SN74LV4053A-Q1 handles both analog and digital signals. Each channel permits signals with amplitudes up to 5.5V (peak) to be transmitted in either direction. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing... Read More | |
| Integrated Circuits (ICs) | 1 | 1 | This quadruple bus buffer gate is designed for 1.65V to 3.6V VCC operation.
This quadruple bus buffer gate is designed for 1.65V to 3.6V VCC operation. | |
| Integrated Circuits (ICs) | 1 | 1 | This quadruple bus buffer gate is designed for 1.65V to 3.6V VCC operation.
This quadruple bus buffer gate is designed for 1.65V to 3.6V VCC operation. | |
| Integrated Circuits (ICs) | 1 | 1 | The SN74LVC138A 3-line to 8-line decoder/demultiplexer is designed for 2.7-V to 3.6-V VCC operation. The device is designed for high-performance memory-decoding or data-routing applications requiring very short propagation delay times. In high-performance memory systems, this decoder minimizes the effects of system decoding. When employed with high-speed memories utilizing a fast... Read More | |
| Integrated Circuits (ICs) | 1 | 1 | This dual 2-line to 4-line decoder/demultiplexer is designed for 1.65-V to 3.6-V VCCoperation. The device comprises two individual 2-line to 4-line decoders in a single package. The active-low enable ((G)) input can be used as a data line in demultiplexing applications. This decoder/demultiplexer features fully buffered inputs, each of which... Read More | |
| Logic | 1 | 1 | The SN74LVC157A quadruple 2-line to 1-line data selector/multiplexer is designed for 2.7V to 3.6V VCC operation.
The SN74LVC157A quadruple 2-line to 1-line data selector/multiplexer is designed for 2.7V to 3.6V VCC operation. | |
| Buffers, Drivers, Receivers, Transceivers | 2 | 1 | This 16-bit buffer/driver is designed for 1.65-V to 3.6-V VCCoperation. The SN74LVC16244A is designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The device can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. It... Read More | |