S
STMicroelectronics
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
Beta
⌘K
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
| Part | Values | Type | Height [z] | Height [z] | Technology | Mounting Type | Package / Case | ESD Protection | Number of Channels [custom] | Filter Order | Resistance - Channel (Ohms) | Applications | Operating Temperature [Min] | Operating Temperature [Max] | Size / Dimension [x] | Size / Dimension [y] | Size / Dimension [x] | Size / Dimension [y] | Peripherals | Core Processor | Program Memory Type | Speed | Voltage - Supply (Vcc/Vdd) [Max] | Voltage - Supply (Vcc/Vdd) [Min] | Core Size | Connectivity | Program Memory Size | Number of I/O | Supplier Device Package | Oscillator Type | Data Converters [custom] | Data Converters [custom] | RAM Size | Grade | Qualification | Utilized IC / Part | Supplied Contents | Board Type | Amplifier Type | Channels per IC | Voltage Dropout (Max) [Max] | Control Features | Voltage - Input (Max) [Max] | Current - Output | Number of Regulators | Current - Supply (Max) [Max] | Output Configuration | Protection Features | Output Type | PSRR [Max] | PSRR [Min] | For Use With/Related Products | Frequency [Max] | Frequency [Min] | Vgs (Max) | FET Type | Input Capacitance (Ciss) (Max) @ Vds | Current - Continuous Drain (Id) @ 25°C | Vgs(th) (Max) @ Id | Drain to Source Voltage (Vdss) | Power Dissipation (Max) | Gate Charge (Qg) (Max) @ Vgs [Max] | Rds On (Max) @ Id, Vgs | Drive Voltage (Max Rds On, Min Rds On) | Fault Protection | Number of Outputs | Input Type | Output Type | Current - Output (Max) [Max] | Ratio - Input:Output [custom] | Switch Type | Voltage - Load | Rds On (Typ) | Interface | Voltage - Supply (Vcc/Vdd) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
STMicroelectronics | 20 pF 40 Ohms | Low Pass | 0.026 in | 0.65 mm | RC (Pi) | Surface Mount | 24-WFBGA FCBGA | 9 | 2nd | 40 Ohms | General Purpose | -30 ░C | 85 °C | 0.076 in | 1.92 mm | 1.92 mm | 0.076 in | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | 144-UFBGA | -40 °C | 105 °C | Brown-out Detect/Reset DMA I2S LCD POR PWM WDT | ARM® Cortex®-M4 | FLASH | 100 MHz | 3.6 V | 1.7 V | 32-Bit Single-Core | CANbus EBI/EMI I2C IrDA LINbus MMC/SD/SDIO QSPI SPI UART/USART USB USB OTG | 1 MB | 114 | 144-UFBGA (10x10) | Internal | 16 | 12 b | 256 K | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | 64-LQFP | -40 °C | 105 °C | DMA LVD POR PWM WDT | e200z0h | FLASH | 32 MHz | 5.5 V | 3 V | 32-Bit Single-Core | CANbus LINbus SPI UART/USART | 256 KB | 45 | 64-LQFP (10x10) | Internal | 16 | 12 b | 16 K | Automotive | AEC-Q100 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | 64-LQFP | -40 °C | 105 °C | DMA LVD POR PWM WDT | e200z0h | FLASH | 48 MHz | 5.5 V | 3 V | 32-Bit Single-Core | CANbus LINbus SPI UART/USART | 128 KB | 45 | 64-LQFP (10x10) | Internal | 16 | 12 b | 12 K | Automotive | AEC-Q100 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | 8-SOIC Package | Board(s) | Bare (Unpopulated) | General Purpose | 1 - Single | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | 4-XFBGA FCBGA | -40 °C | 125 ¯C | 4-FlipChip (0.63x0.63) | 0.2 V | Enable | 5.5 V | 250 mA | 1 | 425 µA | Positive | Over Current Over Temperature Short Circuit Soft Start | 1.81 mOhm | 80 dB | 60 dB | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | RFID Reader | Board(s) | ST25RU3993 | 960 MHz | 840 MHz | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | 49-UFBGA WLCSP | -40 °C | 85 °C | Brown-out Detect/Reset DMA I2S POR PWM WDT | ARM® Cortex®-M4 | FLASH | 84 MHz | 3.6 V | 1.7 V | 32-Bit Single-Core | I2C IrDA LINbus SDIO SPI UART/USART USB OTG | 128 KB | 36 | 49-WLCSP | Internal | 64 K | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | MOSFET (Metal Oxide) | Through Hole | TO-220-3 | -55 °C | 150 °C | TO-220 | 25 V | N-Channel | 960 pF | 10 A | 4 V | 600 V | 90 W | 30.5 nC | 410 mOhm | 10 V | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | DPAK (2 Leads + Tab) SC-63 TO-252-3 | -40 °C | 150 °C | DPAK | Low Side | Current Limiting (Fixed) Over Temperature Over Voltage | 1 | Non-Inverting | N-Channel | 1.7 A | 1:1 | General Purpose | 36 V | 250 mOhm | On/Off |
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Development Boards, Kits, Programmers | 3 | 1 | The EVALSTGAP2HSCM is an isolated single gate driver. The gate driver is characterized by 4 A current capability and rail-to-rail outputs, making the device suitable also for high power inverter applications such as motor drivers in industrial applications equipped with MOSFET / IGBT power switch. The configuration featuring single output... Read More | |
| Evaluation Boards | 1 | 1 | The STGAP2SiCS is an isolated single gate driver. The gate driver is characterized by 4 A current capability and rail-to-rail outputs, making the device also suitable for high power inverter applications such as motor drivers in industrial applications equipped with SiC power switches. The separate source and sink outputs allow... Read More | |
STMicroelectronicsEVALSTPM-3PHISOThree-phase full shunt electricity meter evaluation board based on STPMS2, STISO621 and STM32F413RH | Evaluation Boards | 1 | 8 | The EVALSTPM-3PHISO evaluation board implements a complete three-phase energy meter with low-cost shunt current sensors. The solution is based on the STPMS2 device, a double channel, 24-bits second order sigma-delta modulator, measuring voltage and current for each phase through a voltage divider and a shunt current sensor. Sensing circuitry and... Read More |
STMicroelectronicsEVALSTPM3 | Evaluation and Demonstration Boards and Kits | 1 | 8 | |
STMicroelectronicsEVALSTPM32Single-phase energy metering evaluation board with shunt current sensor based on the STPM32 | Evaluation Boards | 1 | 1 | The STPM32 energy metering evaluation board is a class 0.2, single-phase meter with shunt current sensor for power line systems with Vnom= 140 to 300 V(RMS), Inom/ Imax= 5/100 A(RMS), flin= 50/60 Hz ± 10% and Tamb= -40 to +85 °C. Measured active/reactive power can be output from two programmable... Read More |
STMicroelectronicsEVALTSM1052 | Evaluation Boards | 1 | 8 | |
| RF, RFID, Wireless Evaluation Boards | 1 | 1 | EVB-LIV3F board is a complete standalone evaluation platform for Teseo-LIV3F GNSS module ST solution.
Teseo-LIV3F embeds the high performance ARM microprocessor with embedded flash, UART and I2C serial communication interfaces. Performance and configuration can be analyzed using the ST Teseo Suite Light PC Tool .1 | |
| RF Evaluation and Development Kits, Boards | 1 | 1 | EVB-LIV3FL is a complete standalone evaluation platform for Teseo-LIV3FL low power GNSS module ST solution. Teseo-LIV3FL embeds the high performance ARM microprocessor with embedded flash, UART and I2C serial communication interfaces.
Performance and configuration can be analysed using the ST Teseo Suite PC tool available on www.st.com. | |
| RF Evaluation and Development Kits, Boards | 2 | 1 | Teseo EVB board is a complete standalone evaluation platform for Teseo III GNSS ST solution.
Teseo III embeds the high performance ARM946 microprocessor with dedicated SRAM and several serial communication interfaces, including USB, SPI, I²C, UART and CAN.
Performance and configuration can be analyzed using the ST TESEO-SUITE PC Tool2. | |
| Development Boards, Kits, Programmers | 1 | 1 | The EVB-T5 board is a complete standalone evaluation platform for Teseo-V STA8100GA GNSS Multi Band and Multi Constellation Receiver with STA5635A RF Front-End IC solution. The EVB-T5 is designed for best STA8100GA and STA5635A best performance. Boot and Reset buttons allow an easy programming procedure. The 4-pins connector allows access... Read More | |