S
STMicroelectronics
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
Beta
⌘K
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
STMicroelectronicsEVAL-IBD002-35WInverse Buck 35W with LED current controlled by HVLED002 with Analog/PWM dimming regulation | Evaluation Boards | 1 | 1 | This document describes the EVAL-IBD002-35W demonstration board behavior, designed to manage a dimmable 35 W LED load with a single inverse buck stage. The HVLED002 controller manages the inverse buck circuitry mainly composed by D1, L1 and Q1 components, able to provide around 700 mA as maximum LED load current.... Read More |
| Voltage Regulators - Linear + Switching | 2 | 1 | L5963 is a dual step-down switching regulator with internal power switches, high side driver and a low drop-out linear regulator that can operate as standby regulator or normal LDO. All the regulators can be connected directly to the vehicle battery. In addition to an adjustable voltage detector, voltage supervisors are... Read More | |
STMicroelectronicsEVAL-L9001Evaluation board for L9001 SPS - Simple Power Supply - Multiple Voltage Regulator | Integrated Circuits (ICs) | 2 | 1 | EVAL-L9001 is a low cost tool designed to evaluate L9001, a smart power device designed by STMicroelectronics in advanced BCD technology. L9001 SPS (Simple Power Supply) device is a Multiple output power regulator for automotive applications with one buck regulator, one regulator configurable as buck or linear and one more... Read More |
| Evaluation Boards | 1 | 1 | The EVAL-L9301 is an Evaluation Board designed to evaluate L9301, a smart power device mainly for ABS valves applications. L9301 is able to drive electronic on-off valves with or without external freewheeling diode. The OUT1-8 can be driven by parallel input in PWM mode or SPI command. Through the SPI... Read More | |
| Development Boards, Kits, Programmers | 1 | 1 | The EVAL-L9788 is an evaluation board designed to evaluate L9788, a smart power device designed by STMicroelectronics in advanced BCD technology. The L9788 is an integrated circuit designed for automotive engine management system. It is a device realized in ST BCD proprietary technology, able to provide the full set of... Read More | |
STMicroelectronicsEVAL-L9907-HEvaluation board for L9907 highly integrated 3-phase BLDC motors pre-driver with integrated rail-to-rail operational ampliers and Inductive booster for system operation from 6V up to 54V - high Current version (120Amps) | Power Management (PMIC) | 2 | 1 | The EVAL-L9907-H is designed to provide the user with a platform for the evaluation of the L9907 device. The Board provides all the main input/output capabilities necessary to drive a BLCD motor and provide also diagnostic functionalities. L9907 is fully integrated 3-phase pre-driver with integrated booster capable to drive all... Read More |
| Power Management (PMIC) | 4 | 1 | The EVAL-L9960 and EVAL-L9960T are the simplest solution to evaluate respectively the L9960 and L9960T functionalities providing all the inputs and outputs capabilities necessary to drive DC motors and monitor diagnostic functions. The driving strategy is enhanced by configurable PWM / DIR pins as IN1/IN2.The H-Bridge contains integrated free-wheel diodes.... Read More | |
STMicroelectronicsEVAL-L9963E-MCUL9963E Evaluation Board with on board MCU with preloaded firmware (GUI) | Evaluation Boards | 1 | 1 | The EVAL-L9963E-MCU is a hardware tool for evaluation of L9963E, automotive chip for battery management applications. It can be used for the development of a 48 V battery management system (BMS) or as lower stage of a distributed BMS (depending on total battery voltage. Additional stages can be added thanks... Read More |
STMicroelectronicsEVAL-L99DZ100GDoor Actuator driver with embedded LIN and HS-CAN supporting selective wake up | Development Boards, Kits, Programmers | 3 | 1 | The L99DZ100G and L99DZ100GP are door zone systems IC providing electronic control modules with enhanced power management power supply functionality, including various standby modes, as well as LIN and HS CAN physical communication layers. The two low-drop voltage regulators of the devices supply the system microcontroller and external peripheral loads... Read More |
| Evaluation and Demonstration Boards and Kits | 1 | 1 | The EVAL-L99DZ200 evaluation board is designed for the Front drives Rear door zone architecture and for the power trunk applications. The board is composed by a motherboard and a daughter board. The motherboard, which is based on the SPC582B60 microcontroller, provides the logic section for monitoring and driving the L99DZ200G... Read More | |
| Part | Values | Type | Height [z] | Height [z] | Technology | Mounting Type | Package / Case | ESD Protection | Number of Channels [custom] | Filter Order | Resistance - Channel (Ohms) | Applications | Operating Temperature [Min] | Operating Temperature [Max] | Size / Dimension [x] | Size / Dimension [y] | Size / Dimension [x] | Size / Dimension [y] | Peripherals | Core Processor | Program Memory Type | Speed | Voltage - Supply (Vcc/Vdd) [Max] | Voltage - Supply (Vcc/Vdd) [Min] | Core Size | Connectivity | Program Memory Size | Number of I/O | Supplier Device Package | Oscillator Type | Data Converters [custom] | Data Converters [custom] | RAM Size | Grade | Qualification | Utilized IC / Part | Supplied Contents | Board Type | Amplifier Type | Channels per IC | Voltage Dropout (Max) [Max] | Control Features | Voltage - Input (Max) [Max] | Current - Output | Number of Regulators | Current - Supply (Max) [Max] | Output Configuration | Protection Features | Output Type | PSRR [Max] | PSRR [Min] | For Use With/Related Products | Frequency [Max] | Frequency [Min] | Vgs (Max) | FET Type | Input Capacitance (Ciss) (Max) @ Vds | Current - Continuous Drain (Id) @ 25°C | Vgs(th) (Max) @ Id | Drain to Source Voltage (Vdss) | Power Dissipation (Max) | Gate Charge (Qg) (Max) @ Vgs [Max] | Rds On (Max) @ Id, Vgs | Drive Voltage (Max Rds On, Min Rds On) | Fault Protection | Number of Outputs | Input Type | Output Type | Current - Output (Max) [Max] | Ratio - Input:Output [custom] | Switch Type | Voltage - Load | Rds On (Typ) | Interface | Voltage - Supply (Vcc/Vdd) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
STMicroelectronics | 20 pF 40 Ohms | Low Pass | 0.026 in | 0.65 mm | RC (Pi) | Surface Mount | 24-WFBGA FCBGA | 9 | 2nd | 40 Ohms | General Purpose | -30 ░C | 85 °C | 0.076 in | 1.92 mm | 1.92 mm | 0.076 in | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | 144-UFBGA | -40 °C | 105 °C | Brown-out Detect/Reset DMA I2S LCD POR PWM WDT | ARM® Cortex®-M4 | FLASH | 100 MHz | 3.6 V | 1.7 V | 32-Bit Single-Core | CANbus EBI/EMI I2C IrDA LINbus MMC/SD/SDIO QSPI SPI UART/USART USB USB OTG | 1 MB | 114 | 144-UFBGA (10x10) | Internal | 16 | 12 b | 256 K | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | 64-LQFP | -40 °C | 105 °C | DMA LVD POR PWM WDT | e200z0h | FLASH | 32 MHz | 5.5 V | 3 V | 32-Bit Single-Core | CANbus LINbus SPI UART/USART | 256 KB | 45 | 64-LQFP (10x10) | Internal | 16 | 12 b | 16 K | Automotive | AEC-Q100 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | 64-LQFP | -40 °C | 105 °C | DMA LVD POR PWM WDT | e200z0h | FLASH | 48 MHz | 5.5 V | 3 V | 32-Bit Single-Core | CANbus LINbus SPI UART/USART | 128 KB | 45 | 64-LQFP (10x10) | Internal | 16 | 12 b | 12 K | Automotive | AEC-Q100 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | 8-SOIC Package | Board(s) | Bare (Unpopulated) | General Purpose | 1 - Single | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | 4-XFBGA FCBGA | -40 °C | 125 ¯C | 4-FlipChip (0.63x0.63) | 0.2 V | Enable | 5.5 V | 250 mA | 1 | 425 µA | Positive | Over Current Over Temperature Short Circuit Soft Start | 1.81 mOhm | 80 dB | 60 dB | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | RFID Reader | Board(s) | ST25RU3993 | 960 MHz | 840 MHz | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | 49-UFBGA WLCSP | -40 °C | 85 °C | Brown-out Detect/Reset DMA I2S POR PWM WDT | ARM® Cortex®-M4 | FLASH | 84 MHz | 3.6 V | 1.7 V | 32-Bit Single-Core | I2C IrDA LINbus SDIO SPI UART/USART USB OTG | 128 KB | 36 | 49-WLCSP | Internal | 64 K | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | MOSFET (Metal Oxide) | Through Hole | TO-220-3 | -55 °C | 150 °C | TO-220 | 25 V | N-Channel | 960 pF | 10 A | 4 V | 600 V | 90 W | 30.5 nC | 410 mOhm | 10 V | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | DPAK (2 Leads + Tab) SC-63 TO-252-3 | -40 °C | 150 °C | DPAK | Low Side | Current Limiting (Fixed) Over Temperature Over Voltage | 1 | Non-Inverting | N-Channel | 1.7 A | 1:1 | General Purpose | 36 V | 250 mOhm | On/Off |