S
STMicroelectronics
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
| Part | Values | Type | Height [z] | Height [z] | Technology | Mounting Type | Package / Case | ESD Protection | Number of Channels [custom] | Filter Order | Resistance - Channel (Ohms) | Applications | Operating Temperature [Min] | Operating Temperature [Max] | Size / Dimension [x] | Size / Dimension [y] | Size / Dimension [x] | Size / Dimension [y] | Peripherals | Core Processor | Program Memory Type | Speed | Voltage - Supply (Vcc/Vdd) [Max] | Voltage - Supply (Vcc/Vdd) [Min] | Core Size | Connectivity | Program Memory Size | Number of I/O | Supplier Device Package | Oscillator Type | Data Converters [custom] | Data Converters [custom] | RAM Size | Grade | Qualification | Utilized IC / Part | Supplied Contents | Board Type | Amplifier Type | Channels per IC | Voltage Dropout (Max) [Max] | Control Features | Voltage - Input (Max) [Max] | Current - Output | Number of Regulators | Current - Supply (Max) [Max] | Output Configuration | Protection Features | Output Type | PSRR [Max] | PSRR [Min] | For Use With/Related Products | Frequency [Max] | Frequency [Min] | Vgs (Max) | FET Type | Input Capacitance (Ciss) (Max) @ Vds | Current - Continuous Drain (Id) @ 25°C | Vgs(th) (Max) @ Id | Drain to Source Voltage (Vdss) | Power Dissipation (Max) | Gate Charge (Qg) (Max) @ Vgs [Max] | Rds On (Max) @ Id, Vgs | Drive Voltage (Max Rds On, Min Rds On) | Fault Protection | Number of Outputs | Input Type | Output Type | Current - Output (Max) [Max] | Ratio - Input:Output [custom] | Switch Type | Voltage - Load | Rds On (Typ) | Interface | Voltage - Supply (Vcc/Vdd) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
STMicroelectronics | 20 pF 40 Ohms | Low Pass | 0.026 in | 0.65 mm | RC (Pi) | Surface Mount | 24-WFBGA FCBGA | 9 | 2nd | 40 Ohms | General Purpose | -30 ░C | 85 °C | 0.076 in | 1.92 mm | 1.92 mm | 0.076 in | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | 144-UFBGA | -40 °C | 105 °C | Brown-out Detect/Reset DMA I2S LCD POR PWM WDT | ARM® Cortex®-M4 | FLASH | 100 MHz | 3.6 V | 1.7 V | 32-Bit Single-Core | CANbus EBI/EMI I2C IrDA LINbus MMC/SD/SDIO QSPI SPI UART/USART USB USB OTG | 1 MB | 114 | 144-UFBGA (10x10) | Internal | 16 | 12 b | 256 K | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | 64-LQFP | -40 °C | 105 °C | DMA LVD POR PWM WDT | e200z0h | FLASH | 32 MHz | 5.5 V | 3 V | 32-Bit Single-Core | CANbus LINbus SPI UART/USART | 256 KB | 45 | 64-LQFP (10x10) | Internal | 16 | 12 b | 16 K | Automotive | AEC-Q100 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | 64-LQFP | -40 °C | 105 °C | DMA LVD POR PWM WDT | e200z0h | FLASH | 48 MHz | 5.5 V | 3 V | 32-Bit Single-Core | CANbus LINbus SPI UART/USART | 128 KB | 45 | 64-LQFP (10x10) | Internal | 16 | 12 b | 12 K | Automotive | AEC-Q100 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | 8-SOIC Package | Board(s) | Bare (Unpopulated) | General Purpose | 1 - Single | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | 4-XFBGA FCBGA | -40 °C | 125 ¯C | 4-FlipChip (0.63x0.63) | 0.2 V | Enable | 5.5 V | 250 mA | 1 | 425 µA | Positive | Over Current Over Temperature Short Circuit Soft Start | 1.81 mOhm | 80 dB | 60 dB | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | RFID Reader | Board(s) | ST25RU3993 | 960 MHz | 840 MHz | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | 49-UFBGA WLCSP | -40 °C | 85 °C | Brown-out Detect/Reset DMA I2S POR PWM WDT | ARM® Cortex®-M4 | FLASH | 84 MHz | 3.6 V | 1.7 V | 32-Bit Single-Core | I2C IrDA LINbus SDIO SPI UART/USART USB OTG | 128 KB | 36 | 49-WLCSP | Internal | 64 K | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | MOSFET (Metal Oxide) | Through Hole | TO-220-3 | -55 °C | 150 °C | TO-220 | 25 V | N-Channel | 960 pF | 10 A | 4 V | 600 V | 90 W | 30.5 nC | 410 mOhm | 10 V | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | DPAK (2 Leads + Tab) SC-63 TO-252-3 | -40 °C | 150 °C | DPAK | Low Side | Current Limiting (Fixed) Over Temperature Over Voltage | 1 | Non-Inverting | N-Channel | 1.7 A | 1:1 | General Purpose | 36 V | 250 mOhm | On/Off |
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Transistors | 1 | 1 | The ULQ2801A-ULQ2804A each contain eight Darlington transistors with common emitters and integral suppression diodes for inductive loads. Each Darlington features a peak load current rating of 600 mA (500 mA continuous) and can withstand at least 50 V in the off state. Outputs may be paralleled for higher current capability.... Read More | |
STMicroelectronicsUPSD32 | Integrated Circuits (ICs) | 2 | 8 | |
STMicroelectronicsUPSD33 | Microcontrollers | 7 | 8 | |
STMicroelectronicsUPSD34 | Embedded | 2 | 8 | |
| Transient Voltage Suppressors (TVS) | 1 | 1 | In order to prevent fast transients from leading to severe damages in a high speed data system, a specific protection has been developed by STMicroelectronics. The USB6B1 protects the two input lines against overvoltage. Besides, this device also keeps the power rails in a safe limit thanks to the integrated... Read More | |
| EMI/RFI Filters (LC, RC Networks) | 2 | 1 | The USB specification requires USB downstream ports to be terminated with pull-down resistors from the D+ and D- lines to ground. On the implementation of USB systems, the radiated and conducted EMI should be kept within the required levels as stated by the FCC regulations. In addition to the requirements... Read More | |
| TVS Diodes | 1 | 1 | The USBLC6-2SC6 and USBLC6-2P6 are monolithic application specific devices dedicated to ESD protection of high speed interfaces, such as USB 2.0, Ethernet links and video lines. The very low line capacitance secures a high level of signal integrity without compromising in protecting sensitive chips against the most stringently characterized ESD... Read More | |
STMicroelectronicsUSBP01 | Circuit Protection | 1 | 8 | |
STMicroelectronicsUSBUL | Transient Voltage Suppressors (TVS) | 1 | 8 | |
STMicroelectronicsUSBULC6 | Transient Voltage Suppressors (TVS) | 1 | 1 | |