S
STMicroelectronics
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
| Part | Values | Type | Height [z] | Height [z] | Technology | Mounting Type | Package / Case | ESD Protection | Number of Channels [custom] | Filter Order | Resistance - Channel (Ohms) | Applications | Operating Temperature [Min] | Operating Temperature [Max] | Size / Dimension [x] | Size / Dimension [y] | Size / Dimension [x] | Size / Dimension [y] | Peripherals | Core Processor | Program Memory Type | Speed | Voltage - Supply (Vcc/Vdd) [Max] | Voltage - Supply (Vcc/Vdd) [Min] | Core Size | Connectivity | Program Memory Size | Number of I/O | Supplier Device Package | Oscillator Type | Data Converters [custom] | Data Converters [custom] | RAM Size | Grade | Qualification | Utilized IC / Part | Supplied Contents | Board Type | Amplifier Type | Channels per IC | Voltage Dropout (Max) [Max] | Control Features | Voltage - Input (Max) [Max] | Current - Output | Number of Regulators | Current - Supply (Max) [Max] | Output Configuration | Protection Features | Output Type | PSRR [Max] | PSRR [Min] | For Use With/Related Products | Frequency [Max] | Frequency [Min] | Vgs (Max) | FET Type | Input Capacitance (Ciss) (Max) @ Vds | Current - Continuous Drain (Id) @ 25°C | Vgs(th) (Max) @ Id | Drain to Source Voltage (Vdss) | Power Dissipation (Max) | Gate Charge (Qg) (Max) @ Vgs [Max] | Rds On (Max) @ Id, Vgs | Drive Voltage (Max Rds On, Min Rds On) | Fault Protection | Number of Outputs | Input Type | Output Type | Current - Output (Max) [Max] | Ratio - Input:Output [custom] | Switch Type | Voltage - Load | Rds On (Typ) | Interface | Voltage - Supply (Vcc/Vdd) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
STMicroelectronics | 20 pF 40 Ohms | Low Pass | 0.026 in | 0.65 mm | RC (Pi) | Surface Mount | 24-WFBGA FCBGA | 9 | 2nd | 40 Ohms | General Purpose | -30 ░C | 85 °C | 0.076 in | 1.92 mm | 1.92 mm | 0.076 in | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | 144-UFBGA | -40 °C | 105 °C | Brown-out Detect/Reset DMA I2S LCD POR PWM WDT | ARM® Cortex®-M4 | FLASH | 100 MHz | 3.6 V | 1.7 V | 32-Bit Single-Core | CANbus EBI/EMI I2C IrDA LINbus MMC/SD/SDIO QSPI SPI UART/USART USB USB OTG | 1 MB | 114 | 144-UFBGA (10x10) | Internal | 16 | 12 b | 256 K | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | 64-LQFP | -40 °C | 105 °C | DMA LVD POR PWM WDT | e200z0h | FLASH | 32 MHz | 5.5 V | 3 V | 32-Bit Single-Core | CANbus LINbus SPI UART/USART | 256 KB | 45 | 64-LQFP (10x10) | Internal | 16 | 12 b | 16 K | Automotive | AEC-Q100 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | 64-LQFP | -40 °C | 105 °C | DMA LVD POR PWM WDT | e200z0h | FLASH | 48 MHz | 5.5 V | 3 V | 32-Bit Single-Core | CANbus LINbus SPI UART/USART | 128 KB | 45 | 64-LQFP (10x10) | Internal | 16 | 12 b | 12 K | Automotive | AEC-Q100 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | 8-SOIC Package | Board(s) | Bare (Unpopulated) | General Purpose | 1 - Single | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | 4-XFBGA FCBGA | -40 °C | 125 ¯C | 4-FlipChip (0.63x0.63) | 0.2 V | Enable | 5.5 V | 250 mA | 1 | 425 µA | Positive | Over Current Over Temperature Short Circuit Soft Start | 1.81 mOhm | 80 dB | 60 dB | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | RFID Reader | Board(s) | ST25RU3993 | 960 MHz | 840 MHz | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | 49-UFBGA WLCSP | -40 °C | 85 °C | Brown-out Detect/Reset DMA I2S POR PWM WDT | ARM® Cortex®-M4 | FLASH | 84 MHz | 3.6 V | 1.7 V | 32-Bit Single-Core | I2C IrDA LINbus SDIO SPI UART/USART USB OTG | 128 KB | 36 | 49-WLCSP | Internal | 64 K | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | MOSFET (Metal Oxide) | Through Hole | TO-220-3 | -55 °C | 150 °C | TO-220 | 25 V | N-Channel | 960 pF | 10 A | 4 V | 600 V | 90 W | 30.5 nC | 410 mOhm | 10 V | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | DPAK (2 Leads + Tab) SC-63 TO-252-3 | -40 °C | 150 °C | DPAK | Low Side | Current Limiting (Fixed) Over Temperature Over Voltage | 1 | Non-Inverting | N-Channel | 1.7 A | 1:1 | General Purpose | 36 V | 250 mOhm | On/Off |
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
STMicroelectronicsSTTH152 | Diodes | 1 | 8 | |
| Rectifiers | 1 | 1 | The STTH15RQ06-Y has been developed to be used in application requiring a high-voltage secondary rectification for LLC Full Bridge topology.
It is also suited for use in switching power supplies and automotive applications, industrial applications, as rectification, freewheeling and clamping diode. | |
| Arrays | 3 | 1 | Dual center tap rectifier suited for switch mode power supplies and high frequency DC to DC converters.
Packaged either in TO-220AB, TO-220FPAB and D2PAK, this device is especially intended for use in low voltage, high frequency inverters, freewheeling and polarity protection applications. | |
| Rectifiers | 2 | 1 | The STTH16L06C-Y is specially suited for use in switching power supplies as rectifier and discontinuous mode PFC boost diode for automotive applications. | |
| Single | 10 | 1 | The STTH1R02ZF is an ultrafast recovery rectifier used for energy recovery in switched mode power supplies, switching mode base drive and transistor circuits. Packaged in SOD123Flat, this device is intended for use in low voltage, high frequency inverters, free-wheeling and polarity protection. The compromise between forward voltage drop and recovery... Read More | |
| Discrete Semiconductor Products | 1 | 1 | Dual rectifiers suited for Switch Mode Power Supply and high frequency DC to DC converters.
Packaged in ISOTOP™, this device is intended for use in low voltage, high frequency inverters, free wheeling operation, welding equipment and telecom power supplies. | |
| Single | 6 | 1 | Dual center tap rectifier suited for switch mode power supplies and high frequency DC/DC converters.
Packaged in TO-220AB, TO-220FPAB, I2PAK or D2PAK, this device is intended for use in low voltage, high frequency inverters, free wheeling and polarity protection applications. | |
| Arrays | 3 | 1 | The STTH2003 is a dual center tap fast recovery epitaxial diodes suited for switch mode power supply and high frequency DC/DC converters.
Packaged in TO-220AB, TO-220FPAB, I²PAK or D²PAK, this device is especially intended for secondary rectification. | |
STMicroelectronicsSTTH2004 | Diodes | 2 | 1 | |
| Discrete Semiconductor Products | 1 | 1 | The STTH200R04TV series uses ST's new 400 V planar Pt doping technology. The STTH200R04 is specially suited for switching mode base drive and transistor circuits, such as welding equipment. | |