S
STMicroelectronics
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
Beta
⌘K
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Amplifiers | 1 | 1 | The OA1MPA, OA2MPA, OA4MPA series of single, dual, and quad operational amplifiers offer low-voltage operation, rail-to-rail input and output, and excellent precision (Violower than 200 μV at 25 °C). These low power op amps benefit from STMicroelectronics 5 V CMOS technology and offer an excellent speed/power consumption ratio (150 kHz... Read More | |
| Amplifiers | 1 | 1 | The OA1NP, OA2NP, OA4NP series of CMOS operational amplifiers offer a low power consumption of 580 nA typical and 750 nA maximum per channel when supplied by 1.8 V. Combined with a supply voltage range of 1.5 V to 5.5 V, these features allow the OA1NP, OA2NP, OA4NP op amp... Read More | |
STMicroelectronicsOCVPB21-13F6ESD, Overvoltage and Overcurrent protection with charging orientation direction detection | Circuit Protection | 1 | 1 | The OCVPB21-13F6 is an integrated ESD, overvoltage and overcurrent protection with an integrated input rectification bridge to give flexibility for wearable and IoT customers to manage properly any kind of USB charging conditions with or without USB cable inversion. Thanks to state of the art high voltage technology, ST can... Read More |
STMicroelectronicsP-L496G-CELL02Ultra-low-power with FPU Arm Cortex-M4 MCU 80 MHz with 512 kbytes of Flash memory, USB OTG, LCD, DFSDM | Evaluation Boards | 12 | 1 | The STM32L496xx devices are ultra-low-power microcontrollers based on the high-performance Arm®Cortex®-M4 32-bit RISC core operating at a frequency of up to 80 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision that supports all Arm®single-precision data-processing instructions and data types. It also implements a full set of... Read More |
STMicroelectronicsP-NUCLEO-53L7A1VL53L7CX STM32 Nucleo pack with X-NUCLEO-53L7A1 expansion board and NUCLEO-F401RE development board | Development Boards, Kits, Programmers | 1 | 1 | The P-NUCLEO-53L7A1 is a complete evaluation kit that allows you to learn, evaluate, and develop applications using the VL53L7CX Time-of-Flight 8x8 multizone ranging sensor with 90° FoV. The VL53L7CH artificial enabler Time-of-Flight sensor is also supported by the X-NUCLEO-53L7A1. Specifically designed for applications that require an ultrawide FoV, the VL53L7CX... Read More |
STMicroelectronicsP-NUCLEO-AZURE1Ultra-low-power with FPU Arm Cortex-M4 MCU 80 MHz with 512 Kbytes of Flash memory, LCD, USB OTG, DFSDM | Embedded MCU, DSP | 18 | 1 | The STM32L476xx devices are ultra-low-power microcontrollers based on the high-performance Arm®Cortex®-M4 32-bit RISC core operating at a frequency of up to 80 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision that supports all Arm®single-precision data-processing instructions and data types. It also implements a full set of... Read More |
STMicroelectronicsP-NUCLEO-IKA02A1STM32 Nucleo pack for IO-Link device fully compatible with IO-Link v1.1 (PHY and stack) | RF Evaluation and Development Kits, Boards | 5 | 1 | The P-NUCLEO-IOM01M1 is an STM32 Nucleo pack composed of the STEVAL-IOM001V1 and the NUCLEO-F446RE boards. The STEVAL-IOM001V1 is a single IO-Link master PHY layer (L6360) while the NUCLEO- F446RE runs an IO-Link stack rev 1.1 (developed by and property of TEConcept GmbH, license limited to 10k minutes, renewable without additional... Read More |
STMicroelectronicsP-NUCLEO-IOD04A1STM32 Nucleo pack for IO-Link device applications based on L6364Q transceiver, IPS2050H-32 power switch and STM32L073RZ | Development Boards, Kits, Programmers | 1 | 1 | The P-NUCLEO-IOD04A1 is an STM32 Nucleo pack composed of the X-NUCLEO-IOD02A1 and X-NUCLEO-OUT04A1 expansion boards stacked on the NUCLEO-L073RZ development board. The X-NUCLEO-IOD02A1 features the L6364Q IO-Link device transceiver for the physical connection to an IO-Link master while the X-NUCLEO-OUT04A1 features an industrial digital output expansion board for STM32. The... Read More |
| SCRs | 3 | 1 | Thanks to highly sensitive triggering levels, the 0.8 A P0102DN SCR thyristor is suitable for all applications where available gate current is limited. This device offers a high blocking voltage of 400 V, ideal for applications like interrupters circuits in 110 V mains regions. The surface mount SOT-223 package allows... Read More | |
| Thyristors | 1 | 1 | Thanks to highly sensitive triggering levels, the 0.8 A P0109DA SCR thyristor is suitable for all applications where available gate current is limited.
This device offers a high blocking voltage of 400 V, ideal for applications like interrupters circuits.
The P0109DA is available in through-hole TO-92 package. | |
| Part | Values | Type | Height [z] | Height [z] | Technology | Mounting Type | Package / Case | ESD Protection | Number of Channels [custom] | Filter Order | Resistance - Channel (Ohms) | Applications | Operating Temperature [Min] | Operating Temperature [Max] | Size / Dimension [x] | Size / Dimension [y] | Size / Dimension [x] | Size / Dimension [y] | Peripherals | Core Processor | Program Memory Type | Speed | Voltage - Supply (Vcc/Vdd) [Max] | Voltage - Supply (Vcc/Vdd) [Min] | Core Size | Connectivity | Program Memory Size | Number of I/O | Supplier Device Package | Oscillator Type | Data Converters [custom] | Data Converters [custom] | RAM Size | Grade | Qualification | Utilized IC / Part | Supplied Contents | Board Type | Amplifier Type | Channels per IC | Voltage Dropout (Max) [Max] | Control Features | Voltage - Input (Max) [Max] | Current - Output | Number of Regulators | Current - Supply (Max) [Max] | Output Configuration | Protection Features | Output Type | PSRR [Max] | PSRR [Min] | For Use With/Related Products | Frequency [Max] | Frequency [Min] | Vgs (Max) | FET Type | Input Capacitance (Ciss) (Max) @ Vds | Current - Continuous Drain (Id) @ 25°C | Vgs(th) (Max) @ Id | Drain to Source Voltage (Vdss) | Power Dissipation (Max) | Gate Charge (Qg) (Max) @ Vgs [Max] | Rds On (Max) @ Id, Vgs | Drive Voltage (Max Rds On, Min Rds On) | Fault Protection | Number of Outputs | Input Type | Output Type | Current - Output (Max) [Max] | Ratio - Input:Output [custom] | Switch Type | Voltage - Load | Rds On (Typ) | Interface | Voltage - Supply (Vcc/Vdd) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
STMicroelectronics | 20 pF 40 Ohms | Low Pass | 0.026 in | 0.65 mm | RC (Pi) | Surface Mount | 24-WFBGA FCBGA | 9 | 2nd | 40 Ohms | General Purpose | -30 ░C | 85 °C | 0.076 in | 1.92 mm | 1.92 mm | 0.076 in | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | 144-UFBGA | -40 °C | 105 °C | Brown-out Detect/Reset DMA I2S LCD POR PWM WDT | ARM® Cortex®-M4 | FLASH | 100 MHz | 3.6 V | 1.7 V | 32-Bit Single-Core | CANbus EBI/EMI I2C IrDA LINbus MMC/SD/SDIO QSPI SPI UART/USART USB USB OTG | 1 MB | 114 | 144-UFBGA (10x10) | Internal | 16 | 12 b | 256 K | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | 64-LQFP | -40 °C | 105 °C | DMA LVD POR PWM WDT | e200z0h | FLASH | 32 MHz | 5.5 V | 3 V | 32-Bit Single-Core | CANbus LINbus SPI UART/USART | 256 KB | 45 | 64-LQFP (10x10) | Internal | 16 | 12 b | 16 K | Automotive | AEC-Q100 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | 64-LQFP | -40 °C | 105 °C | DMA LVD POR PWM WDT | e200z0h | FLASH | 48 MHz | 5.5 V | 3 V | 32-Bit Single-Core | CANbus LINbus SPI UART/USART | 128 KB | 45 | 64-LQFP (10x10) | Internal | 16 | 12 b | 12 K | Automotive | AEC-Q100 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | 8-SOIC Package | Board(s) | Bare (Unpopulated) | General Purpose | 1 - Single | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | 4-XFBGA FCBGA | -40 °C | 125 ¯C | 4-FlipChip (0.63x0.63) | 0.2 V | Enable | 5.5 V | 250 mA | 1 | 425 µA | Positive | Over Current Over Temperature Short Circuit Soft Start | 1.81 mOhm | 80 dB | 60 dB | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | RFID Reader | Board(s) | ST25RU3993 | 960 MHz | 840 MHz | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | 49-UFBGA WLCSP | -40 °C | 85 °C | Brown-out Detect/Reset DMA I2S POR PWM WDT | ARM® Cortex®-M4 | FLASH | 84 MHz | 3.6 V | 1.7 V | 32-Bit Single-Core | I2C IrDA LINbus SDIO SPI UART/USART USB OTG | 128 KB | 36 | 49-WLCSP | Internal | 64 K | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | MOSFET (Metal Oxide) | Through Hole | TO-220-3 | -55 °C | 150 °C | TO-220 | 25 V | N-Channel | 960 pF | 10 A | 4 V | 600 V | 90 W | 30.5 nC | 410 mOhm | 10 V | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
STMicroelectronics | Surface Mount | DPAK (2 Leads + Tab) SC-63 TO-252-3 | -40 °C | 150 °C | DPAK | Low Side | Current Limiting (Fixed) Over Temperature Over Voltage | 1 | Non-Inverting | N-Channel | 1.7 A | 1:1 | General Purpose | 36 V | 250 mOhm | On/Off |