MAX202IPW

Active

Texas Instruments

5-V DUAL CHANNEL 120KBPS RS-232 LINE DRIVER/RECEIVER WITH +/-9V OUTPUT & +/-15-KV ESD PROTECTION

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsMAX202 5-V Dual RS-232 Line Driver and Receiver With ±15-kV ESD Protection datasheet (Rev. G)

MAX202IPW

Active

Texas Instruments

5-V DUAL CHANNEL 120KBPS RS-232 LINE DRIVER/RECEIVER WITH +/-9V OUTPUT & +/-15-KV ESD PROTECTION

Deep-Dive with AI

DocumentsMAX202 5-V Dual RS-232 Line Driver and Receiver With ±15-kV ESD Protection datasheet (Rev. G)

Specifications Pricing Series Description Documents

Technical Specifications

Parameters and characteristics commom to parts in this series

Specification	MAX202IPW	MAX202 Series

Data Rate	120 Kbps	120 Kbps
Duplex	Full	Full
Mounting Type	Surface Mount	Surface Mount
Number of Drivers/Receivers [custom]	2	2
Number of Drivers/Receivers [custom]	2	2
Operating Temperature [Max]	85 °C	70 - 85 °C
Operating Temperature [Min]	-40 °C	-40 - 0 °C
Package / Case	16-TSSOP	16-TSSOP, 16-SOIC
Package / Case	-	0.154 - 3.9 mm Width
Package / Case [x]	0.173 "	0.173 "
Package / Case [x]	4.4 mm	4.4 mm
Protocol	RS232	RS232
Receiver Hysteresis	500 mV	500 mV
Supplier Device Package	16-TSSOP	16-TSSOP, 16-SOIC
Type	Transceiver	Transceiver
Voltage - Supply [Max]	5.5 V	5.5 V
Voltage - Supply [Min]	4.5 V	4.5 V

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Tube	1	$ 2.60
		10	$ 1.68
		25	$ 1.44
		100	$ 1.16
		250	$ 1.03
		500	$ 0.95
		1000	$ 0.88
		2500	$ 0.81
		5000	$ 0.77
Texas Instruments	TUBE	1	$ 1.28
		100	$ 1.05
		250	$ 0.76
		1000	$ 0.57

MAX202 Series

5-V dual channel 120kbps RS-232 line driver/receiver with +/-9V output & +/-15-kV ESD protection

Part	Number of Drivers/Receivers [custom]	Number of Drivers/Receivers [custom]	Type	Receiver Hysteresis	Voltage - Supply [Max]	Voltage - Supply [Min]	Mounting Type	Package / Case [x]	Package / Case	Package / Case [x]	Protocol	Duplex	Operating Temperature [Min]	Operating Temperature [Max]	Supplier Device Package	Data Rate	Package / Case
Texas Instruments MAX202IPWRE4 2/2 Transceiver Full RS232 16-TSSOP	2	2	Transceiver	500 mV	5.5 V	4.5 V	Surface Mount	0.173 "	16-TSSOP	4.4 mm	RS232	Full	-40 °C	85 °C	16-TSSOP	120 Kbps
Texas Instruments MAX202ID The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate. The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.	2	2	Transceiver	500 mV	5.5 V	4.5 V	Surface Mount		16-SOIC		RS232	Full	-40 °C	85 °C	16-SOIC	120 Kbps	0.154 in, 3.9 mm Width
Texas Instruments MAX202CPW The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate. The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.	2	2	Transceiver	500 mV	5.5 V	4.5 V	Surface Mount	0.173 "	16-TSSOP	4.4 mm	RS232	Full	0 °C	70 ░C	16-TSSOP	120 Kbps
Texas Instruments MAX202CPWR The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate. The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.	2	2	Transceiver	500 mV	5.5 V	4.5 V	Surface Mount	0.173 "	16-TSSOP	4.4 mm	RS232	Full	0 °C	70 ░C	16-TSSOP	120 Kbps
Texas Instruments MAX202CD The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate. The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.	2	2	Transceiver	500 mV	5.5 V	4.5 V	Surface Mount		16-SOIC		RS232	Full	0 °C	70 ░C	16-SOIC	120 Kbps	0.154 in, 3.9 mm Width
Texas Instruments MAX202IDG4 2/2 Transceiver Full RS232 16-SOIC	2	2	Transceiver	500 mV	5.5 V	4.5 V	Surface Mount		16-SOIC		RS232	Full	-40 °C	85 °C	16-SOIC	120 Kbps	0.154 in, 3.9 mm Width
Texas Instruments MAX202IPWR The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate. The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.	2	2	Transceiver	500 mV	5.5 V	4.5 V	Surface Mount	0.173 "	16-TSSOP	4.4 mm	RS232	Full	-40 °C	85 °C	16-TSSOP	120 Kbps
Texas Instruments MAX202CDW The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate. The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.	2	2	Transceiver	500 mV	5.5 V	4.5 V	Surface Mount		16-SOIC		RS232	Full	0 °C	70 ░C	16-SOIC	120 Kbps
Texas Instruments MAX202CDR The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate. The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.	2	2	Transceiver	500 mV	5.5 V	4.5 V	Surface Mount		16-SOIC		RS232	Full	0 °C	70 ░C	16-SOIC	120 Kbps	0.154 in, 3.9 mm Width
Texas Instruments MAX202IDWR The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate. The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.	2	2	Transceiver	500 mV	5.5 V	4.5 V	Surface Mount		16-SOIC		RS232	Full	-40 °C	85 °C	16-SOIC	120 Kbps
Texas Instruments MAX202IDW The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate. The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.	2	2	Transceiver	500 mV	5.5 V	4.5 V	Surface Mount		16-SOIC		RS232	Full	-40 °C	85 °C	16-SOIC	120 Kbps
Texas Instruments MAX202IDE4 2/2 Transceiver Full RS232 16-SOIC	2	2	Transceiver	500 mV	5.5 V	4.5 V	Surface Mount		16-SOIC		RS232	Full	-40 °C	85 °C	16-SOIC	120 Kbps	0.154 in, 3.9 mm Width
Texas Instruments MAX202IPW The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate. The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.	2	2	Transceiver	500 mV	5.5 V	4.5 V	Surface Mount	0.173 "	16-TSSOP	4.4 mm	RS232	Full	-40 °C	85 °C	16-TSSOP	120 Kbps
Texas Instruments MAX202CDRE4 2/2 Transceiver Full RS232 16-SOIC	2	2	Transceiver	500 mV	5.5 V	4.5 V	Surface Mount		16-SOIC		RS232	Full	0 °C	70 ░C	16-SOIC	120 Kbps	0.154 in, 3.9 mm Width
Texas Instruments MAX202CDWR 2/2 Transceiver Full RS232 16-SOIC	2	2	Transceiver	500 mV	5.5 V	4.5 V	Surface Mount		16-SOIC		RS232	Full	0 °C	70 ░C	16-SOIC	120 Kbps
Texas Instruments MAX202IDR The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate. The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.	2	2	Transceiver	500 mV	5.5 V	4.5 V	Surface Mount		16-SOIC		RS232	Full	-40 °C	85 °C	16-SOIC	120 Kbps	0.154 in, 3.9 mm Width

Description

General part information

MAX202 Series

The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.

Documents

Technical documentation and resources

MAX202 5-V Dual RS-232 Line Driver and Receiver With ±15-kV ESD Protection datasheet (Rev. G)

Data sheet