Texas Instruments
Texas Instruments Incorporated (TI) is a global semiconductor design and manufacturing company that develops analog ICs and embedded processors. By employing the worlds brightest minds, TI creates innovations that shape the future of technology. TI is helping more than 100,000 customers transform the future, today.
Series List(7161)
| Part | Category | # Parts | Status | Description |
|---|---|---|---|---|
Texas Instruments10KHT5574Octal ECL-to-TTL translator with D-type edge-triggered flip-flops and 3-state outputs | Translators, Level Shifters | 2 | 1 | This octal ECL-to-TTL translator is designed to provide efficient translation between a 10KH ECL signal environment and a TTL signal environment. This device is designed specifically to improve the performance and density of ECL-to-TTL CPU/bus-oriented functions such as memory-address drivers, clock drivers, and bus-oriented receivers and transmitters. The eight flip-flops... Read More |
| Logic | 1 | 1 | The SN74AHC1G04-Q1 contains one inverter gate. The device performs the Boolean function Y = A.
The SN74AHC1G04-Q1 contains one inverter gate. The device performs the Boolean function Y = A. | |
Texas Instruments1P1G08Enhanced product, 1-ch, 2-input 1.65-V to 5.5-V 32-mA drive strength AND gate | Logic | 1 | 10 | The SN74LVC1G08 performs the Boolean function Y = A • B or Y =A\ + B\in positive logic. This device is fully specified for partial-power-down applications using Ioff. The Ioffcircuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The SN74LVC1G08 performs the Boolean... Read More |
| Logic | 1 | 1 | The 54ACxxxx and 54ACTxxxx series are composed of high-speed CMOS functions, specifically designed to meet the radiation requirements of the aerospace industry. They include a large set of gates, flip-flops, multiplexers, counters, bus interfaces, and several other functions. Their radiation hardness, immunity from single event latch-up (SEL) and single event... Read More | |
| Logic | 2 | 1 | This single Schmitt-trigger inverter is designed for 1.65-V to 5.5-V VCCoperation. The SN74LVC1G14 device contains one inverter and performs the Boolean function Y =A. The device functions as an independent inverter, but because of Schmitt action, it may have different input threshold levels for positive-going (VT+) and negative-going (VT-) signals.... Read More | |
| Interface | 2 | 1 | This single analog switch is designed for 1.65-V to 5.5-V VCCoperation. The SN74LVC1G66-Q1 device supports analog and digital signals. The device permits bidirectional transmission of signals with amplitudes of up to 5.5 V (peak). This single analog switch is designed for 1.65-V to 5.5-V VCCoperation. The SN74LVC1G66-Q1 device supports analog... Read More | |
| Logic | 3 | 1 | The CY29FCT52T has two 8-bit back-to-back registers that store data flowing in both directions between two bidirectional buses. Separate clock, clock enable, and 3-state output-enable signals are provided for each register. Both A outputs and B outputs are specified to sink 64 mA. This device is fully specified for partial-power-down... Read More | |
Texas Instruments430BT519025 MHz MCU with 256KB Flash, 16KB SRAM, 12-bit ADC, Commercially Licensed Bluetooth v2.1 Stack | Integrated Circuits (ICs) | 6 | 1 | The TI MSP430™ family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with extensive low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant... Read More |
| Translators, Level Shifters | 3 | 1 | The AEC-Q100 qualified 2N7001T-Q1 device is a single-bit buffered voltage signal converter that uses two separate configurable power-supply rails to up or down translate a unidirectional signal. The device is operational with both VCCAand VCCBsupplies down to 1.65 V and up to 3.60 V. VCCAdefines the input threshold voltage on... Read More | |
| Microcontrollers | 4 | 1 | The Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low power modes is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit... Read More | |
Texas Instruments54ABT827Military 10-ch, 4.5-V to 5.5-V buffers with TTL-compatible CMOS inputs and 3-state outputs | Logic | 1 | 1 | These 10-bit buffers or bus drivers provide a high-performance bus interface for wide data paths or buses carrying parity. The 3-state control gate is a 2-input AND gate with active-low inputs so that if either output-enable (OE1\ or OE2\) input is high, all ten outputs are in the high-impedance state.... Read More |
| Logic | 2 | 1 | The 54ACxxxx and 54ACTxxxx series are composed of high-speed CMOS functions, specifically designed to meet the radiation requirements of the aerospace industry. They include a large set of gates, flip-flops, multiplexers, counters, bus interfaces, and several other functions. Their radiation hardness, immunity from single event latch-up (SEL) and single event... Read More | |
| Logic | 2 | 1 | The 54ACxxxx and 54ACTxxxx series are composed of high-speed CMOS functions, specifically designed to meet the radiation requirements of the aerospace industry. They include a large set of gates, flip-flops, multiplexers, counters, bus interfaces, and several other functions. Their radiation hardness, immunity from single event latch-up (SEL) and single event... Read More | |
| Logic | 1 | 1 | High Speed CMOS Logic Dual 4-Stage Binary Counter | |
| Logic | 1 | 1 | The 54ACxxxx and 54ACTxxxx series are composed of high-speed CMOS functions, specifically designed to meet the radiation requirements of the aerospace industry. They include a large set of gates, flip-flops, multiplexers, counters, bus interfaces, and several other functions. Their radiation hardness, immunity from single event latch-up (SEL) and single event... Read More | |
| Logic | 1 | 1 | The 54ACxxxx and 54ACTxxxx series are composed of high-speed CMOS functions, specifically designed to meet the radiation requirements of the aerospace industry. They include a large set of gates, flip-flops, multiplexers, counters, bus interfaces, and several other functions. Their radiation hardness, immunity from single event latch-up (SEL) and single event... Read More | |
| Logic | 1 | 1 | The ’ACT04 devices contain six independent inverters. The devices perform the Boolean function Y = A.
The ’ACT04 devices contain six independent inverters. The devices perform the Boolean function Y = A. | |
| Logic | 1 | 1 | The 54ACxxxx and 54ACTxxxx series are composed of high-speed CMOS functions, specifically designed to meet the radiation requirements of the aerospace industry. They include a large set of gates, flip-flops, multiplexers, counters, bus interfaces, and several other functions. Their radiation hardness, immunity from single event latch-up (SEL) and single event... Read More | |
| Logic | 1 | 1 | The ’ACT109 devices contain two independent J-K\ positive-edge-triggered flip-flops. A low level at the preset (PRE)\ or clear (CLR)\ inputs sets or resets the outputs, regardless of the levels of the other inputs. When PRE\ and CLR\ are inactive (high), data at the J and K\ inputs meeting the setup-time... Read More | |
| Logic | 1 | 1 | The 54ACxxxx and 54ACTxxxx series are composed of high-speed CMOS functions, specifically designed to meet the radiation requirements of the aerospace industry. They include a large set of gates, flip-flops, multiplexers, counters, bus interfaces, and several other functions. Their radiation hardness, immunity from single event latch-up (SEL) and single event... Read More | |