MAX202CD
ActiveTexas Instruments
5-V DUAL CHANNEL 120KBPS RS-232 LINE DRIVER/RECEIVER WITH +/-9V OUTPUT & +/-15-KV ESD PROTECTION
Deep-Dive with AI
Search across all available documentation for this part.
MAX202CD
ActiveTexas Instruments
5-V DUAL CHANNEL 120KBPS RS-232 LINE DRIVER/RECEIVER WITH +/-9V OUTPUT & +/-15-KV ESD PROTECTION
Deep-Dive with AI
Technical Specifications
Parameters and characteristics commom to parts in this series
| Specification | MAX202CD | MAX202 Series |
|---|---|---|
| Data Rate | 120 Kbps | 120 Kbps |
| Duplex | Full | Full |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Drivers/Receivers [custom] | 2 | 2 |
| Number of Drivers/Receivers [custom] | 2 | 2 |
| Operating Temperature [Max] | 70 ░C | 70 - 85 °C |
| Operating Temperature [Min] | 0 °C | -40 - 0 °C |
| Package / Case | 16-SOIC | 16-TSSOP, 16-SOIC |
| Package / Case | 3.9 mm Width, 0.154 in | 0.154 - 3.9 mm Width |
| Package / Case | - | 0.173 " |
| Package / Case | - | 4.4 mm |
| Protocol | RS232 | RS232 |
| Receiver Hysteresis | 500 mV | 500 mV |
| Supplier Device Package | 16-SOIC | 16-TSSOP, 16-SOIC |
| Type | Transceiver | Transceiver |
| Voltage - Supply [Max] | 5.5 V | 5.5 V |
| Voltage - Supply [Min] | 4.5 V | 4.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
MAX202 Series
5-V dual channel 120kbps RS-232 line driver/receiver with +/-9V output & +/-15-kV ESD protection
| Part | Number of Drivers/Receivers [custom] | Number of Drivers/Receivers [custom] | Type | Receiver Hysteresis | Voltage - Supply [Max] | Voltage - Supply [Min] | Mounting Type | Package / Case [x] | Package / Case | Package / Case [x] | Protocol | Duplex | Operating Temperature [Min] | Operating Temperature [Max] | Supplier Device Package | Data Rate | Package / Case |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
2 | 2 | Transceiver | 500 mV | 5.5 V | 4.5 V | Surface Mount | 0.173 " | 16-TSSOP | 4.4 mm | RS232 | Full | -40 °C | 85 °C | 16-TSSOP | 120 Kbps | ||
Texas Instruments MAX202IDThe MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.
The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate. | 2 | 2 | Transceiver | 500 mV | 5.5 V | 4.5 V | Surface Mount | 16-SOIC | RS232 | Full | -40 °C | 85 °C | 16-SOIC | 120 Kbps | 0.154 in, 3.9 mm Width | ||
Texas Instruments MAX202CPWThe MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.
The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate. | 2 | 2 | Transceiver | 500 mV | 5.5 V | 4.5 V | Surface Mount | 0.173 " | 16-TSSOP | 4.4 mm | RS232 | Full | 0 °C | 70 ░C | 16-TSSOP | 120 Kbps | |
Texas Instruments MAX202CPWRThe MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.
The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate. | 2 | 2 | Transceiver | 500 mV | 5.5 V | 4.5 V | Surface Mount | 0.173 " | 16-TSSOP | 4.4 mm | RS232 | Full | 0 °C | 70 ░C | 16-TSSOP | 120 Kbps | |
Texas Instruments MAX202CDThe MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.
The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate. | 2 | 2 | Transceiver | 500 mV | 5.5 V | 4.5 V | Surface Mount | 16-SOIC | RS232 | Full | 0 °C | 70 ░C | 16-SOIC | 120 Kbps | 0.154 in, 3.9 mm Width | ||
2 | 2 | Transceiver | 500 mV | 5.5 V | 4.5 V | Surface Mount | 16-SOIC | RS232 | Full | -40 °C | 85 °C | 16-SOIC | 120 Kbps | 0.154 in, 3.9 mm Width | |||
Texas Instruments MAX202IPWRThe MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.
The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate. | 2 | 2 | Transceiver | 500 mV | 5.5 V | 4.5 V | Surface Mount | 0.173 " | 16-TSSOP | 4.4 mm | RS232 | Full | -40 °C | 85 °C | 16-TSSOP | 120 Kbps | |
Texas Instruments MAX202CDWThe MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.
The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate. | 2 | 2 | Transceiver | 500 mV | 5.5 V | 4.5 V | Surface Mount | 16-SOIC | RS232 | Full | 0 °C | 70 ░C | 16-SOIC | 120 Kbps | |||
Texas Instruments MAX202CDRThe MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.
The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate. | 2 | 2 | Transceiver | 500 mV | 5.5 V | 4.5 V | Surface Mount | 16-SOIC | RS232 | Full | 0 °C | 70 ░C | 16-SOIC | 120 Kbps | 0.154 in, 3.9 mm Width | ||
Texas Instruments MAX202IDWRThe MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.
The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate. | 2 | 2 | Transceiver | 500 mV | 5.5 V | 4.5 V | Surface Mount | 16-SOIC | RS232 | Full | -40 °C | 85 °C | 16-SOIC | 120 Kbps | |||
Texas Instruments MAX202IDWThe MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.
The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate. | 2 | 2 | Transceiver | 500 mV | 5.5 V | 4.5 V | Surface Mount | 16-SOIC | RS232 | Full | -40 °C | 85 °C | 16-SOIC | 120 Kbps | |||
2 | 2 | Transceiver | 500 mV | 5.5 V | 4.5 V | Surface Mount | 16-SOIC | RS232 | Full | -40 °C | 85 °C | 16-SOIC | 120 Kbps | 0.154 in, 3.9 mm Width | |||
Texas Instruments MAX202IPWThe MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.
The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate. | 2 | 2 | Transceiver | 500 mV | 5.5 V | 4.5 V | Surface Mount | 0.173 " | 16-TSSOP | 4.4 mm | RS232 | Full | -40 °C | 85 °C | 16-TSSOP | 120 Kbps | |
2 | 2 | Transceiver | 500 mV | 5.5 V | 4.5 V | Surface Mount | 16-SOIC | RS232 | Full | 0 °C | 70 ░C | 16-SOIC | 120 Kbps | 0.154 in, 3.9 mm Width | |||
2 | 2 | Transceiver | 500 mV | 5.5 V | 4.5 V | Surface Mount | 16-SOIC | RS232 | Full | 0 °C | 70 ░C | 16-SOIC | 120 Kbps | ||||
Texas Instruments MAX202IDRThe MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.
The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate. | 2 | 2 | Transceiver | 500 mV | 5.5 V | 4.5 V | Surface Mount | 16-SOIC | RS232 | Full | -40 °C | 85 °C | 16-SOIC | 120 Kbps | 0.154 in, 3.9 mm Width |
Description
General part information
MAX202 Series
The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.
The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.
Documents
Technical documentation and resources