Zenode.ai Logo
TPS61052DRCR - 10-VSON

TPS61052DRCR

Active
Texas Instruments

1.2A HIGH POWER WHITE LED DRIVER WITH I2C COMPATIBLE INTERFACE, DSBGA PACKAGE

Deep-Dive with AI

Search across all available documentation for this part.

TPS61052DRCR - 10-VSON

TPS61052DRCR

Active
Texas Instruments

1.2A HIGH POWER WHITE LED DRIVER WITH I2C COMPATIBLE INTERFACE, DSBGA PACKAGE

Technical Specifications

Parameters and characteristics commom to parts in this series

SpecificationTPS61052DRCRTPS61052 Series
ApplicationsCamera FlashCamera Flash
Current - Output / Channel1.2 A1.2 A
DimmingPWMPWM
Features-Dimmable
Frequency2 MHz2 MHz
Internal Switch(s)TrueTrue
Mounting TypeSurface MountSurface Mount
Number of Outputs11
Operating Temperature [Max]85 °C85 °C
Operating Temperature [Min]-40 °C-40 °C
Outputs and Type-Non-Isolated
Outputs and Type-1
Package / Case10-VFDFN Exposed Pad12-UFBGA, DSBGA, 10-VFDFN Exposed Pad
Supplied Contents-Board(s)
Supplier Device Package10-VSON (3x3)12-DSBGA, 10-VSON (3x3)
TopologyStep-Up (Boost)Step-Up (Boost)
TypeDC DC RegulatorDC DC Regulator
Utilized IC / Part-TPS61052
Voltage - Input-6 V
Voltage - Input-2.5 V
Voltage - Output5.5 V5.5 V
Voltage - Supply (Max) [Max]6 V6 V
Voltage - Supply (Min) [Min]2.5 V2.5 V

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

TPS61052 Series

1.2A high power white LED driver with I2C compatible interface, DSBGA package

PartSupplier Device PackageOperating Temperature [Max]Operating Temperature [Min]ApplicationsVoltage - OutputNumber of OutputsDimmingTypeMounting TypeInternal Switch(s)Voltage - Supply (Max) [Max]Voltage - Supply (Min) [Min]Current - Output / ChannelFrequencyPackage / CaseTopologyVoltage - Input [Max]Voltage - Input [Min]Supplied ContentsUtilized IC / PartOutputs and TypeOutputs and TypeFeatures
Texas Instruments
TPS61052YZGR
The TPS6105x device is based on a high-frequency synchronous-boost topology with constant current sink to drive single white LEDs. The device uses an inductive fixed-frequency PWM control scheme using small external components, minimizing input ripple current. The 2-MHz switching frequency allows the use of small and low profile 2.2-µH inductors. To optimize overall efficiency, the device operates with only a 250-mV LED feedback voltage. The TPS6105x device not only operates as a regulated current source, but also as a standard voltage-boost regulator. This additional operating mode can be useful to supply other high-power devices in the system, such as a hands-free audio power amplifier, or any other component requiring a supply voltage higher than the battery voltage (refer to TPS61052). For highest flexibility, the LED current or the desired output voltage can be programmed through an I2C compatible interface. To simplify flash synchronization with the camera module, the device offers a trigger pin (FLASH_SYNC) for fast LED turnon time. When the TPS6105x is not in use, it can be put into shutdown mode through the I2C-compatible interface, reducing the input current to 0.3 µA (typical). During shutdown, the LED pin is high impedance to avoid leakage current through the LED. The TPS6105x device is based on a high-frequency synchronous-boost topology with constant current sink to drive single white LEDs. The device uses an inductive fixed-frequency PWM control scheme using small external components, minimizing input ripple current. The 2-MHz switching frequency allows the use of small and low profile 2.2-µH inductors. To optimize overall efficiency, the device operates with only a 250-mV LED feedback voltage. The TPS6105x device not only operates as a regulated current source, but also as a standard voltage-boost regulator. This additional operating mode can be useful to supply other high-power devices in the system, such as a hands-free audio power amplifier, or any other component requiring a supply voltage higher than the battery voltage (refer to TPS61052). For highest flexibility, the LED current or the desired output voltage can be programmed through an I2C compatible interface. To simplify flash synchronization with the camera module, the device offers a trigger pin (FLASH_SYNC) for fast LED turnon time. When the TPS6105x is not in use, it can be put into shutdown mode through the I2C-compatible interface, reducing the input current to 0.3 µA (typical). During shutdown, the LED pin is high impedance to avoid leakage current through the LED.
12-DSBGA
85 °C
-40 °C
Camera Flash
5.5 V
1
PWM
DC DC Regulator
Surface Mount
6 V
2.5 V
1.2 A
2 MHz
12-UFBGA, DSBGA
Step-Up (Boost)
Texas Instruments
TPS61052YZGT
LED Driver IC 1 Output DC DC Regulator Step-Up (Boost) PWM Dimming 1.2A (Flash) 12-DSBGA
12-DSBGA
85 °C
-40 °C
Camera Flash
5.5 V
1
PWM
DC DC Regulator
Surface Mount
6 V
2.5 V
1.2 A
2 MHz
12-UFBGA, DSBGA
Step-Up (Boost)
Texas Instruments
TPS61052EVM-269
TPS61052 1, Non-Isolated Outputs LED Driver Evaluation Board
1.2 A
6 V
2.5 V
Board(s)
TPS61052
Non-Isolated
1
Dimmable
Texas Instruments
TPS61052DRCR
The TPS6105x device is based on a high-frequency synchronous-boost topology with constant current sink to drive single white LEDs. The device uses an inductive fixed-frequency PWM control scheme using small external components, minimizing input ripple current. The 2-MHz switching frequency allows the use of small and low profile 2.2-µH inductors. To optimize overall efficiency, the device operates with only a 250-mV LED feedback voltage. The TPS6105x device not only operates as a regulated current source, but also as a standard voltage-boost regulator. This additional operating mode can be useful to supply other high-power devices in the system, such as a hands-free audio power amplifier, or any other component requiring a supply voltage higher than the battery voltage (refer to TPS61052). For highest flexibility, the LED current or the desired output voltage can be programmed through an I2C compatible interface. To simplify flash synchronization with the camera module, the device offers a trigger pin (FLASH_SYNC) for fast LED turnon time. When the TPS6105x is not in use, it can be put into shutdown mode through the I2C-compatible interface, reducing the input current to 0.3 µA (typical). During shutdown, the LED pin is high impedance to avoid leakage current through the LED. The TPS6105x device is based on a high-frequency synchronous-boost topology with constant current sink to drive single white LEDs. The device uses an inductive fixed-frequency PWM control scheme using small external components, minimizing input ripple current. The 2-MHz switching frequency allows the use of small and low profile 2.2-µH inductors. To optimize overall efficiency, the device operates with only a 250-mV LED feedback voltage. The TPS6105x device not only operates as a regulated current source, but also as a standard voltage-boost regulator. This additional operating mode can be useful to supply other high-power devices in the system, such as a hands-free audio power amplifier, or any other component requiring a supply voltage higher than the battery voltage (refer to TPS61052). For highest flexibility, the LED current or the desired output voltage can be programmed through an I2C compatible interface. To simplify flash synchronization with the camera module, the device offers a trigger pin (FLASH_SYNC) for fast LED turnon time. When the TPS6105x is not in use, it can be put into shutdown mode through the I2C-compatible interface, reducing the input current to 0.3 µA (typical). During shutdown, the LED pin is high impedance to avoid leakage current through the LED.
10-VSON (3x3)
85 °C
-40 °C
Camera Flash
5.5 V
1
PWM
DC DC Regulator
Surface Mount
6 V
2.5 V
1.2 A
2 MHz
10-VFDFN Exposed Pad
Step-Up (Boost)

Description

General part information

TPS61052 Series

The TPS6105x device is based on a high-frequency synchronous-boost topology with constant current sink to drive single white LEDs. The device uses an inductive fixed-frequency PWM control scheme using small external components, minimizing input ripple current.

The 2-MHz switching frequency allows the use of small and low profile 2.2-µH inductors. To optimize overall efficiency, the device operates with only a 250-mV LED feedback voltage.

The TPS6105x device not only operates as a regulated current source, but also as a standard voltage-boost regulator. This additional operating mode can be useful to supply other high-power devices in the system, such as a hands-free audio power amplifier, or any other component requiring a supply voltage higher than the battery voltage (refer to TPS61052).