MAX3232ECDR

Active

Texas Instruments

3- TO 5.5-V DUAL CHANNEL 250KBPS RS-232 LINE DRIVER/RECEIVER WITH +/-15-KV IEC-ESD PROTECTION

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsMAX3232E 3-V to 5.5-V Multichannel RS-232 Line Driver and Receiver With ±15-kV IEC ESD Protection datasheet (Rev. E)

MAX3232ECDR

Active

Texas Instruments

3- TO 5.5-V DUAL CHANNEL 250KBPS RS-232 LINE DRIVER/RECEIVER WITH +/-15-KV IEC-ESD PROTECTION

Deep-Dive with AI

DocumentsMAX3232E 3-V to 5.5-V Multichannel RS-232 Line Driver and Receiver With ±15-kV IEC ESD Protection datasheet (Rev. E)

Specifications Pricing Series Description Documents

Technical Specifications

Parameters and characteristics commom to parts in this series

Specification	MAX3232ECDR	MAX3232 Series

Data Rate	250 KBd	250 KBd
Duplex	Full	Full
Grade	-	Automotive
Mounting Type	Surface Mount	Surface Mount
Number of Drivers/Receivers [custom]	2	2
Number of Drivers/Receivers [custom]	2	2
Operating Temperature [Max]	70 ░C	70 - 125 ░C
Operating Temperature [Min]	0 °C	-55 - 0 °C
Package / Case	16-SOIC	16-SSOP, 16-TSSOP, 16-SOIC
Package / Case	3.9 mm Width, 0.154 in	0.154 - 3.9 mm Width
Package / Case	-	0.209 in
Package / Case	-	5.3 mm
Package / Case	-	0.173 "
Package / Case	-	4.4 mm
Protocol	RS232	RS232
Qualification	-	AEC-Q100
Receiver Hysteresis	300 mV	300 mV
Supplier Device Package	16-SOIC	16-SSOP, 16-TSSOP, 16-SOIC
Type	Transceiver	Transceiver
Voltage - Supply [Max]	5.5 V	5.5 V
Voltage - Supply [Min]	3 V	3 V

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Cut Tape (CT)	1	$ 1.49
		10	$ 1.33
		25	$ 1.26
		100	$ 1.04
		250	$ 0.97
		500	$ 0.86
		1000	$ 0.68
	Digi-Reel®	1	$ 1.49
		10	$ 1.33
		25	$ 1.26
		100	$ 1.04
		250	$ 0.97
		500	$ 0.86
		1000	$ 0.68
	Tape & Reel (TR)	2500	$ 0.63
		5000	$ 0.60
		12500	$ 0.58
Texas Instruments	LARGE T&R	1	$ 0.84
		100	$ 0.65
		250	$ 0.48
		1000	$ 0.34

MAX3232 Series

3- to 5.5-V dual channel 250kbps RS-232 line driver/receiver with +/-15-kV IEC-ESD protection

Part	Type	Operating Temperature [Max]	Operating Temperature [Min]	Voltage - Supply [Min]	Voltage - Supply [Max]	Number of Drivers/Receivers [custom]	Number of Drivers/Receivers [custom]	Data Rate	Duplex	Supplier Device Package	Package / Case [y]	Package / Case	Package / Case [y]	Mounting Type	Receiver Hysteresis	Protocol	Package / Case [x]	Package / Case [x]	Package / Case	Grade	Qualification
Texas Instruments MAX3232ECDBR The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SSOP	0.209 in	16-SSOP	5.3 mm	Surface Mount	300 mV	RS232
Texas Instruments MAX3232IPWR The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer	Transceiver	85 °C	-40 °C	3 V	5.5 V	2	2	250 KBd	Full	16-TSSOP		16-TSSOP		Surface Mount	300 mV	RS232	0.173 "	4.4 mm
Texas Instruments MAX3232ECDB 2/2 Transceiver Full RS232 16-SSOP	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SSOP	0.209 in	16-SSOP	5.3 mm	Surface Mount	300 mV	RS232
Texas Instruments MAX3232IPW The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer	Transceiver	85 °C	-40 °C	3 V	5.5 V	2	2	250 KBd	Full	16-TSSOP		16-TSSOP		Surface Mount	300 mV	RS232	0.173 "	4.4 mm
Texas Instruments MAX3232CDWR The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SOIC		16-SOIC		Surface Mount	300 mV	RS232
Texas Instruments MAX3232EIDB 2/2 Transceiver Full RS232 16-SSOP	Transceiver	85 °C	-40 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SSOP	0.209 in	16-SSOP	5.3 mm	Surface Mount	300 mV	RS232
Texas Instruments MAX3232CPWR The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full	16-TSSOP		16-TSSOP		Surface Mount	300 mV	RS232	0.173 "	4.4 mm
Texas Instruments MAX3232ECDE4 2/2 Transceiver Full RS232 16-SOIC	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SOIC		16-SOIC		Surface Mount	300 mV	RS232			0.154 in, 3.9 mm Width
Texas Instruments MAX3232IDB 2/2 Transceiver Full RS232 16-SSOP	Transceiver	85 °C	-40 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SSOP	0.209 in	16-SSOP	5.3 mm	Surface Mount	300 mV	RS232
Texas Instruments MAX3232CDE4 2/2 Transceiver Full RS232 16-SOIC	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SOIC		16-SOIC		Surface Mount	300 mV	RS232			0.154 in, 3.9 mm Width
Texas Instruments MAX3232ECDW The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SOIC		16-SOIC		Surface Mount	300 mV	RS232
Texas Instruments MAX3232CDG4 2/2 Transceiver Full RS232 16-SOIC	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SOIC		16-SOIC		Surface Mount	300 mV	RS232			0.154 in, 3.9 mm Width
Texas Instruments MAX3232ECD The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SOIC		16-SOIC		Surface Mount	300 mV	RS232			0.154 in, 3.9 mm Width
Texas Instruments MAX3232EIPWR The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.	Transceiver	85 °C	-40 °C	3 V	5.5 V	2	2	250 KBd	Full	16-TSSOP		16-TSSOP		Surface Mount	300 mV	RS232	0.173 "	4.4 mm
Texas Instruments MAX3232EIPWG4 2/2 Transceiver Full RS232 16-TSSOP	Transceiver	85 °C	-40 °C	3 V	5.5 V	2	2	250 KBd	Full	16-TSSOP		16-TSSOP		Surface Mount	300 mV	RS232	0.173 "	4.4 mm
Texas Instruments MAX3232CPW The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full	16-TSSOP		16-TSSOP		Surface Mount	300 mV	RS232	0.173 "	4.4 mm
Texas Instruments MAX3232EIDBR The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.	Transceiver	85 °C	-40 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SSOP	0.209 in	16-SSOP	5.3 mm	Surface Mount	300 mV	RS232
Texas Instruments MAX3232CD The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SOIC		16-SOIC		Surface Mount	300 mV	RS232			0.154 in, 3.9 mm Width
Texas Instruments MAX3232MPWREP The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.	Transceiver	125 °C	-55 °C	3 V	5.5 V	2	2	250 KBd	Full	16-TSSOP		16-TSSOP		Surface Mount	300 mV	RS232	0.173 "	4.4 mm
Texas Instruments MAX3232EIPWRQ1 The MAX3232E device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3V to 5.5V supply. The device operates at data signaling rates up to 250kbit/s and a maximum of 30V/µs driver output slew rate. The MAX3232E device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3V to 5.5V supply. The device operates at data signaling rates up to 250kbit/s and a maximum of 30V/µs driver output slew rate.	Transceiver	85 °C	-40 °C	3 V	5.5 V	2	2	250 KBd	Full	16-TSSOP		16-TSSOP		Surface Mount	300 mV	RS232	0.173 "	4.4 mm		Automotive	AEC-Q100
Texas Instruments MAX3232IDWR The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer	Transceiver	85 °C	-40 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SOIC		16-SOIC		Surface Mount	300 mV	RS232
Texas Instruments MAX3232CDB The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SSOP	0.209 in	16-SSOP	5.3 mm	Surface Mount	300 mV	RS232
Texas Instruments MAX3232IPWRG4 The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer	Transceiver	85 °C	-40 °C	3 V	5.5 V	2	2	250 KBd	Full	16-TSSOP		16-TSSOP		Surface Mount	300 mV	RS232	0.173 "	4.4 mm
Texas Instruments MAX3232EIDR The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.	Transceiver	85 °C	-40 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SOIC		16-SOIC		Surface Mount	300 mV	RS232			0.154 in, 3.9 mm Width
Texas Instruments MAX3232EIDBE4 2/2 Transceiver Full RS232 16-SSOP	Transceiver	85 °C	-40 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SSOP	0.209 in	16-SSOP	5.3 mm	Surface Mount	300 mV	RS232
Texas Instruments MAX3232IDG4 2/2 Transceiver Full RS232 16-SOIC	Transceiver	85 °C	-40 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SOIC		16-SOIC		Surface Mount	300 mV	RS232			0.154 in, 3.9 mm Width
Texas Instruments MAX3232CDR The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SOIC		16-SOIC		Surface Mount	300 mV	RS232			0.154 in, 3.9 mm Width
Texas Instruments MAX3232EIDBG4 2/2 Transceiver Full RS232 16-SSOP	Transceiver	85 °C	-40 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SSOP	0.209 in	16-SSOP	5.3 mm	Surface Mount	300 mV	RS232
Texas Instruments MAX3232ECPWR The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full	16-TSSOP		16-TSSOP		Surface Mount	300 mV	RS232	0.173 "	4.4 mm
Texas Instruments MAX3232CDBR The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SSOP	0.209 in	16-SSOP	5.3 mm	Surface Mount	300 mV	RS232
Texas Instruments MAX3232EIDWG4 2/2 Transceiver Full RS232 16-SOIC	Transceiver	85 °C	-40 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SOIC		16-SOIC		Surface Mount	300 mV	RS232
Texas Instruments MAX3232ECDWG4 2/2 Transceiver Full RS232 16-SOIC	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SOIC		16-SOIC		Surface Mount	300 mV	RS232
Texas Instruments MAX3232IDBR The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer	Transceiver	85 °C	-40 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SSOP	0.209 in	16-SSOP	5.3 mm	Surface Mount	300 mV	RS232
Texas Instruments MAX3232CDRE4 2/2 Transceiver Full RS232 16-SOIC	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SOIC		16-SOIC		Surface Mount	300 mV	RS232			0.154 in, 3.9 mm Width
Texas Instruments MAX3232ECDWR The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SOIC		16-SOIC		Surface Mount	300 mV	RS232
Texas Instruments MAX3232IDR 2/2 Transceiver Full RS232 16-SOIC	Transceiver	85 °C	-40 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SOIC		16-SOIC		Surface Mount	300 mV	RS232			0.154 in, 3.9 mm Width
Texas Instruments MAX3232EIDWR The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.	Transceiver	85 °C	-40 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SOIC		16-SOIC		Surface Mount	300 mV	RS232
Texas Instruments MAX3232CPWRG4 The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full	16-TSSOP		16-TSSOP		Surface Mount	300 mV	RS232	0.173 "	4.4 mm
Texas Instruments MAX3232CPWE4 2/2 Transceiver Full RS232 16-TSSOP	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full	16-TSSOP		16-TSSOP		Surface Mount	300 mV	RS232	0.173 "	4.4 mm
Texas Instruments MAX3232IDW The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer	Transceiver	85 °C	-40 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SOIC		16-SOIC		Surface Mount	300 mV	RS232
Texas Instruments MAX3232ID The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer	Transceiver	85 °C	-40 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SOIC		16-SOIC		Surface Mount	300 mV	RS232			0.154 in, 3.9 mm Width
Texas Instruments MAX3232ECPW The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full	16-TSSOP		16-TSSOP		Surface Mount	300 mV	RS232	0.173 "	4.4 mm
Texas Instruments MAX3232EIPWE4 2/2 Transceiver Full RS232 16-TSSOP	Transceiver	85 °C	-40 °C	3 V	5.5 V	2	2	250 KBd	Full	16-TSSOP		16-TSSOP		Surface Mount	300 mV	RS232	0.173 "	4.4 mm
Texas Instruments MAX3232CDWG4 2/2 Transceiver Full RS232 16-SOIC	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SOIC		16-SOIC		Surface Mount	300 mV	RS232
Texas Instruments MAX3232CPWRE4 2/2 Transceiver Full RS232 16-TSSOP	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full	16-TSSOP		16-TSSOP		Surface Mount	300 mV	RS232	0.173 "	4.4 mm
Texas Instruments MAX3232ECDR The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SOIC		16-SOIC		Surface Mount	300 mV	RS232			0.154 in, 3.9 mm Width
Texas Instruments MAX3232CDWRG4 2/2 Transceiver Full RS232 16-SOIC	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SOIC		16-SOIC		Surface Mount	300 mV	RS232
Texas Instruments MAX3232CDW The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. spacer spacer spacer	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SOIC		16-SOIC		Surface Mount	300 mV	RS232
Texas Instruments MAX3232CPWG4 2/2 Transceiver Full RS232 16-TSSOP	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full	16-TSSOP		16-TSSOP		Surface Mount	300 mV	RS232	0.173 "	4.4 mm
Texas Instruments MAX3232ECDG4 2/2 Transceiver Full RS232 16-SOIC	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SOIC		16-SOIC		Surface Mount	300 mV	RS232			0.154 in, 3.9 mm Width
Texas Instruments MAX3232CDWRE4 2/2 Transceiver Full RS232	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full			16-SOIC		Surface Mount	300 mV	RS232
Texas Instruments MAX3232IDWRE4 2/2 Transceiver Full RS232 16-SOIC	Transceiver	85 °C	-40 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SOIC		16-SOIC		Surface Mount	300 mV	RS232
Texas Instruments MAX3232IDRE4 2/2 Transceiver Full RS232 16-SOIC	Transceiver	85 °C	-40 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SOIC		16-SOIC		Surface Mount	300 mV	RS232			0.154 in, 3.9 mm Width
Texas Instruments MAX3232IDWRG4 2/2 Transceiver Full RS232 16-SOIC	Transceiver	85 °C	-40 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SOIC		16-SOIC		Surface Mount	300 mV	RS232
Texas Instruments MAX3232CDBE4 2/2 Transceiver Full RS232 16-SSOP	Transceiver	70 ░C	0 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SSOP	0.209 in	16-SSOP	5.3 mm	Surface Mount	300 mV	RS232
Texas Instruments MAX3232MDBREP The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.	Transceiver	125 °C	-55 °C	3 V	5.5 V	2	2	250 KBd	Full	16-SSOP	0.209 in	16-SSOP	5.3 mm	Surface Mount	300 mV	RS232
Texas Instruments MAX3232EIPW The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.	Transceiver	85 °C	-40 °C	3 V	5.5 V	2	2	250 KBd	Full	16-TSSOP		16-TSSOP		Surface Mount	300 mV	RS232	0.173 "	4.4 mm

Description

General part information

MAX3232 Series

The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND).

The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.

The MAX3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND).

Documents

Technical documentation and resources

MAX3232E 3-V to 5.5-V Multichannel RS-232 Line Driver and Receiver With ±15-kV IEC ESD Protection datasheet (Rev. E)

Data sheet