MAX3232MDBREP
ActiveENHANCED PRODUCT 3- TO 5.5-V 250KBPS RS-232 LINE DRIVER/RECEIVER WITH +/-15-KV ESD PROTECTION 16-SSOP -55 TO 125
Deep-Dive with AI
Search across all available documentation for this part.
MAX3232MDBREP
ActiveENHANCED PRODUCT 3- TO 5.5-V 250KBPS RS-232 LINE DRIVER/RECEIVER WITH +/-15-KV ESD PROTECTION 16-SSOP -55 TO 125
Deep-Dive with AI
Technical Specifications
Parameters and characteristics commom to parts in this series
| Specification | MAX3232MDBREP | MAX3232-EP Series |
|---|---|---|
| Data Rate | 250 KBd | 250 KBd |
| Duplex | Full | Full |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Drivers/Receivers [custom] | 2 | 2 |
| Number of Drivers/Receivers [custom] | 2 | 2 |
| Operating Temperature [Max] | 125 °C | 125 °C |
| Operating Temperature [Min] | -55 °C | -55 °C |
| Package / Case | 16-SSOP | 16-SSOP, 16-TSSOP |
| Package / Case | - | 0.173 " |
| Package / Case | - | 4.4 mm |
| Package / Case [y] | 0.209 in | 0.209 in |
| Package / Case [y] | 5.3 mm | 5.3 mm |
| Protocol | RS232 | RS232 |
| Receiver Hysteresis | 300 mV | 300 mV |
| Supplier Device Package | 16-SSOP | 16-SSOP, 16-TSSOP |
| Type | Transceiver | Transceiver |
| Voltage - Supply [Max] | 5.5 V | 5.5 V |
| Voltage - Supply [Min] | 3 V | 3 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
MAX3232-EP Series
Enhanced Product 3- to 5.5-V 250kbps RS-232 line driver/receiver with +/-15-kV ESD protection
| Part | Package / Case [y] | Package / Case | Package / Case [y] | Data Rate | Mounting Type | Duplex | Receiver Hysteresis | Supplier Device Package | Voltage - Supply [Min] | Voltage - Supply [Max] | Operating Temperature [Min] | Operating Temperature [Max] | Protocol | Type | Number of Drivers/Receivers [custom] | Number of Drivers/Receivers [custom] | Package / Case [x] | Package / Case [x] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments MAX3232MDBREPThe MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.
The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. | 0.209 in | 16-SSOP | 5.3 mm | 250 KBd | Surface Mount | Full | 300 mV | 16-SSOP | 3 V | 5.5 V | -55 °C | 125 °C | RS232 | Transceiver | 2 | 2 | ||
Texas Instruments MAX3232MPWREPThe MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.
The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. | 16-TSSOP | 250 KBd | Surface Mount | Full | 300 mV | 16-TSSOP | 3 V | 5.5 V | -55 °C | 125 °C | RS232 | Transceiver | 2 | 2 | 0.173 " | 4.4 mm |
Description
General part information
MAX3232-EP Series
The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.
The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.
Documents
Technical documentation and resources