DRV8806PWPR
ActiveTexas Instruments
40V, 3A 4 CHANNEL LOW-SIDE DRIVER WITH INTEGRATED SPI AND OPEN LOAD DETECTION
Deep-Dive with AI
Search across all available documentation for this part.
DRV8806PWPR
ActiveTexas Instruments
40V, 3A 4 CHANNEL LOW-SIDE DRIVER WITH INTEGRATED SPI AND OPEN LOAD DETECTION
Deep-Dive with AI
Technical Specifications
Parameters and characteristics commom to parts in this series
| Specification | DRV8806PWPR | DRV8806 Series |
|---|---|---|
| Applications | General Purpose | General Purpose |
| Current - Output | 2 A | 2 A |
| Embedded | - | Yes, MCU, 16-Bit |
| Function | Driver - Fully Integrated, Control and Power Stage | Driver - Fully Integrated, Control and Power Stage, Motor Controller/Driver |
| Interface | SPI | SPI |
| Motor Type - AC, DC | Brushed DC | Brushed DC |
| Motor Type - Stepper | Unipolar | Unipolar |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature [Max] | 150 C | 150 C |
| Operating Temperature [Min] | -40 °C | -40 °C |
| Output Configuration | Low Side (4) | Low Side (4) |
| Package / Case | 16-PowerTSSOP | 16-PowerTSSOP |
| Package / Case [y] | 4.4 mm | 4.4 mm |
| Package / Case [y] | 0.173 in | 0.173 in |
| Primary Attributes | - | 4 Channel Low-Side Driver |
| Secondary Attributes | - | Serial Interface(s) |
| Supplied Contents | - | Board(s) |
| Supplier Device Package | 16-HTSSOP | 16-HTSSOP |
| Technology | Power MOSFET | Power MOSFET |
| Type | - | Power Management |
| Utilized IC / Part | - | DRV8806 |
| Voltage - Load [Max] | 40 V | 40 V |
| Voltage - Load [Min] | 8.2 V | 8.2 V |
| Voltage - Supply [Max] | 40 VDC | 40 VDC |
| Voltage - Supply [Min] | 8.2 V | 8.2 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
DRV8806 Series
40V, 3A 4 channel low-side driver with integrated SPI and open load detection
| Part | Applications | Voltage - Supply [Min] | Voltage - Supply [Max] | Supplier Device Package | Operating Temperature [Max] | Operating Temperature [Min] | Current - Output | Technology | Mounting Type | Voltage - Load [Max] | Voltage - Load [Min] | Motor Type - Stepper | Output Configuration | Motor Type - AC, DC | Function | Interface | Package / Case [y] | Package / Case | Package / Case [y] | Embedded | Supplied Contents | Utilized IC / Part | Primary Attributes | Type | Secondary Attributes |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments DRV8806PWPThe DRV8806 provides a 4-channel low-side driver with overcurrent protection. It has built-in diodes to clamp turnoff transients generated by inductive loads and can be used to drive unipolar stepper motors, DC motors, relays, solenoids, or other loads.
The DRV8806 can supply up to 2-A (single channel on) or 1-A (all channels on) continuous output current (with adequate PCB heatsinking at 25°C).
A serial interface is provided to control the output drivers. Fault status can be read through the serial interface. Multiple DRV8806 devices can be chained together to use a single serial interface.
Internal shutdown functions are provided for overcurrent protection, short-circuit protection, undervoltage lockout, and overtemperature, and faults are indicated by a fault output pin.
The DRV8806 is available in a 16-pin HTSSOP package (Eco-friendly: RoHS & no Sb/Br).
The DRV8806 provides a 4-channel low-side driver with overcurrent protection. It has built-in diodes to clamp turnoff transients generated by inductive loads and can be used to drive unipolar stepper motors, DC motors, relays, solenoids, or other loads.
The DRV8806 can supply up to 2-A (single channel on) or 1-A (all channels on) continuous output current (with adequate PCB heatsinking at 25°C).
A serial interface is provided to control the output drivers. Fault status can be read through the serial interface. Multiple DRV8806 devices can be chained together to use a single serial interface.
Internal shutdown functions are provided for overcurrent protection, short-circuit protection, undervoltage lockout, and overtemperature, and faults are indicated by a fault output pin.
The DRV8806 is available in a 16-pin HTSSOP package (Eco-friendly: RoHS & no Sb/Br). | General Purpose | 8.2 V | 40 VDC | 16-HTSSOP | 150 C | -40 °C | 2 A | Power MOSFET | Surface Mount | 40 V | 8.2 V | Unipolar | Low Side (4) | Brushed DC | Driver - Fully Integrated, Control and Power Stage | SPI | 4.4 mm | 16-PowerTSSOP | 0.173 in | ||||||
Texas Instruments DRV8806PWPRThe DRV8806 provides a 4-channel low-side driver with overcurrent protection. It has built-in diodes to clamp turnoff transients generated by inductive loads and can be used to drive unipolar stepper motors, DC motors, relays, solenoids, or other loads.
The DRV8806 can supply up to 2-A (single channel on) or 1-A (all channels on) continuous output current (with adequate PCB heatsinking at 25°C).
A serial interface is provided to control the output drivers. Fault status can be read through the serial interface. Multiple DRV8806 devices can be chained together to use a single serial interface.
Internal shutdown functions are provided for overcurrent protection, short-circuit protection, undervoltage lockout, and overtemperature, and faults are indicated by a fault output pin.
The DRV8806 is available in a 16-pin HTSSOP package (Eco-friendly: RoHS & no Sb/Br).
The DRV8806 provides a 4-channel low-side driver with overcurrent protection. It has built-in diodes to clamp turnoff transients generated by inductive loads and can be used to drive unipolar stepper motors, DC motors, relays, solenoids, or other loads.
The DRV8806 can supply up to 2-A (single channel on) or 1-A (all channels on) continuous output current (with adequate PCB heatsinking at 25°C).
A serial interface is provided to control the output drivers. Fault status can be read through the serial interface. Multiple DRV8806 devices can be chained together to use a single serial interface.
Internal shutdown functions are provided for overcurrent protection, short-circuit protection, undervoltage lockout, and overtemperature, and faults are indicated by a fault output pin.
The DRV8806 is available in a 16-pin HTSSOP package (Eco-friendly: RoHS & no Sb/Br). | General Purpose | 8.2 V | 40 VDC | 16-HTSSOP | 150 C | -40 °C | 2 A | Power MOSFET | Surface Mount | 40 V | 8.2 V | Unipolar | Low Side (4) | Brushed DC | Driver - Fully Integrated, Control and Power Stage | SPI | 4.4 mm | 16-PowerTSSOP | 0.173 in | ||||||
Motor Controller/Driver | Yes, MCU, 16-Bit | Board(s) | DRV8806 | 4 Channel Low-Side Driver | Power Management | Serial Interface(s) |
Description
General part information
DRV8806 Series
The DRV8806 provides a 4-channel low-side driver with overcurrent protection. It has built-in diodes to clamp turnoff transients generated by inductive loads and can be used to drive unipolar stepper motors, DC motors, relays, solenoids, or other loads.
The DRV8806 can supply up to 2-A (single channel on) or 1-A (all channels on) continuous output current (with adequate PCB heatsinking at 25°C).
A serial interface is provided to control the output drivers. Fault status can be read through the serial interface. Multiple DRV8806 devices can be chained together to use a single serial interface.
Documents
Technical documentation and resources