DRV8806 Series
40V, 3A 4 channel low-side driver with integrated SPI and open load detection
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
40V, 3A 4 channel low-side driver with integrated SPI and open load detection
| Part | Applications | Voltage - Supply [Min] | Voltage - Supply [Max] | Supplier Device Package | Operating Temperature [Max] | Operating Temperature [Min] | Current - Output | Technology | Mounting Type | Voltage - Load [Max] | Voltage - Load [Min] | Motor Type - Stepper | Output Configuration | Motor Type - AC, DC | Function | Interface | Package / Case [y] | Package / Case | Package / Case [y] | Embedded | Supplied Contents | Utilized IC / Part | Primary Attributes | Type | Secondary Attributes |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments DRV8806PWP | General Purpose | 8.2 V | 40 VDC | 16-HTSSOP | 150 C | -40 °C | 2 A | Power MOSFET | Surface Mount | 40 V | 8.2 V | Unipolar | Low Side (4) | Brushed DC | Driver - Fully Integrated, Control and Power Stage | SPI | 4.4 mm | 16-PowerTSSOP | 0.173 in | ||||||
Texas Instruments DRV8806PWPR | General Purpose | 8.2 V | 40 VDC | 16-HTSSOP | 150 C | -40 °C | 2 A | Power MOSFET | Surface Mount | 40 V | 8.2 V | Unipolar | Low Side (4) | Brushed DC | Driver - Fully Integrated, Control and Power Stage | SPI | 4.4 mm | 16-PowerTSSOP | 0.173 in | ||||||
Texas Instruments DRV8806EVM | Motor Controller/Driver | Yes, MCU, 16-Bit | Board(s) | DRV8806 | 4 Channel Low-Side Driver | Power Management | Serial Interface(s) |
Key Features
• 4-Channel Protected Low-Side DriverFour NMOS FETs With Overcurrent ProtectionIntegrated Inductive Clamp DiodesSerial InterfaceOpen/Shorted Load Detection2-A (Single Channel On)/1-A (All Channels On)Maximum Drive Current per Channel (at 25°C)8.2-V to 40-V Operating Supply Voltage RangeThermally-Enhanced Surface Mount Package4-Channel Protected Low-Side DriverFour NMOS FETs With Overcurrent ProtectionIntegrated Inductive Clamp DiodesSerial InterfaceOpen/Shorted Load Detection2-A (Single Channel On)/1-A (All Channels On)Maximum Drive Current per Channel (at 25°C)8.2-V to 40-V Operating Supply Voltage RangeThermally-Enhanced Surface Mount Package
Description
AI
The DRV8806 provides a 4-channel low-side driver with overcurrent protection. It has built-in diodes to clamp turnoff transients generated by inductive loads and can be used to drive unipolar stepper motors, DC motors, relays, solenoids, or other loads.
The DRV8806 can supply up to 2-A (single channel on) or 1-A (all channels on) continuous output current (with adequate PCB heatsinking at 25°C).
A serial interface is provided to control the output drivers. Fault status can be read through the serial interface. Multiple DRV8806 devices can be chained together to use a single serial interface.
Internal shutdown functions are provided for overcurrent protection, short-circuit protection, undervoltage lockout, and overtemperature, and faults are indicated by a fault output pin.
The DRV8806 is available in a 16-pin HTSSOP package (Eco-friendly: RoHS & no Sb/Br).
The DRV8806 provides a 4-channel low-side driver with overcurrent protection. It has built-in diodes to clamp turnoff transients generated by inductive loads and can be used to drive unipolar stepper motors, DC motors, relays, solenoids, or other loads.
The DRV8806 can supply up to 2-A (single channel on) or 1-A (all channels on) continuous output current (with adequate PCB heatsinking at 25°C).
A serial interface is provided to control the output drivers. Fault status can be read through the serial interface. Multiple DRV8806 devices can be chained together to use a single serial interface.
Internal shutdown functions are provided for overcurrent protection, short-circuit protection, undervoltage lockout, and overtemperature, and faults are indicated by a fault output pin.
The DRV8806 is available in a 16-pin HTSSOP package (Eco-friendly: RoHS & no Sb/Br).