LP5990TMX-3.0/NOPB
ActiveTexas Instruments
IC REG LINEAR 3V 200MA 4DSBGA
Deep-Dive with AI
Search across all available documentation for this part.
DocumentsDatasheet
LP5990TMX-3.0/NOPB
ActiveTexas Instruments
IC REG LINEAR 3V 200MA 4DSBGA
Deep-Dive with AI
DocumentsDatasheet
Technical Specifications
Parameters and characteristics commom to parts in this series
| Specification | LP5990TMX-3.0/NOPB | LP5990 Series |
|---|---|---|
| Board Type | - | Fully Populated |
| Channels per IC | - | 1 |
| Control Features | Enable | Enable |
| Current - Output | 200 mA | 200 mA |
| Current - Quiescent (Iq) | 75 µA | 75 µA |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Regulators | 1 | 1 |
| Operating Temperature [Max] | 85 °C | 85 °C |
| Operating Temperature [Min] | -40 °C | -40 °C |
| Output Configuration | Positive | Positive |
| Output Type | 27.03 °C/W | 27.03 °C/W |
| Package / Case | DSBGA, 4-WFBGA | DSBGA, 4-WFBGA |
| Protection Features | Over Current, Short Circuit, Over Temperature | Over Current, Short Circuit, Over Temperature |
| PSRR | 55 dB | 55 dB |
| Regulator Type | - | Positive Fixed |
| Supplied Contents | - | Board(s) |
| Supplier Device Package | 4-DSBGA | 4-DSBGA |
| Utilized IC / Part | - | LP5990 |
| Voltage - Input | - | 5.5 V |
| Voltage - Input | - | 2.2 V |
| Voltage - Input (Max) [Max] | 5.5 V | 5.5 V |
| Voltage - Output | - | 1.8 - 2.8 V |
| Voltage - Output (Min/Fixed) | - | 1.2 - 3.6 V |
| Voltage Dropout (Max) | 0.25 V | 0.25 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
LP5990 Series
200-mA, low-IQ, high-accuracy low-dropout voltage regulator with enable
| Part | Supplier Device Package | Voltage Dropout (Max) | Control Features | PSRR | Mounting Type | Voltage - Output (Min/Fixed) | Protection Features | Current - Quiescent (Iq) | Current - Output | Output Configuration | Output Type | Voltage - Input (Max) [Max] | Package / Case | Operating Temperature [Min] | Operating Temperature [Max] | Number of Regulators | Utilized IC / Part | Voltage - Output | Supplied Contents | Voltage - Input [Max] | Voltage - Input [Min] | Board Type | Regulator Type | Channels per IC |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments LP5990TM-3.6/NOPBThe LP5990 regulator is designed to meet the requirements of portable, battery-powered systems providing an accurate output voltage, low noise and low quiescent current.
The LP5990 will provide a 1.8V output from a low input voltage of 2.2V and can provide 200mA to an external load.
When switched into shutdown mode via a logic signal at the enable pin, the power consumption is reduced to virtually
zero.
Fast shut-down is achieved by the push pull architecture.
The LP5990 is designed to be stable with space saving 0402 ceramic capacitors as small as 1µF, this gives anoverall solutionsize of < 2.5mm2.
Performance is specified for a -40°C to 125°C junction temperature range.
The device is available in micro SMD Package (0.4mm pitch) and is available with 1.2V,1.3V,1.8V,2.8V,3.0V,3.3V and 3.6V outputs.Lower voltage options down to 0.8V are available on request. For all other output voltage options please contact your local NSC sales office.
The LP5990 regulator is designed to meet the requirements of portable, battery-powered systems providing an accurate output voltage, low noise and low quiescent current.
The LP5990 will provide a 1.8V output from a low input voltage of 2.2V and can provide 200mA to an external load.
When switched into shutdown mode via a logic signal at the enable pin, the power consumption is reduced to virtually
zero.
Fast shut-down is achieved by the push pull architecture.
The LP5990 is designed to be stable with space saving 0402 ceramic capacitors as small as 1µF, this gives anoverall solutionsize of < 2.5mm2.
Performance is specified for a -40°C to 125°C junction temperature range.
The device is available in micro SMD Package (0.4mm pitch) and is available with 1.2V,1.3V,1.8V,2.8V,3.0V,3.3V and 3.6V outputs.Lower voltage options down to 0.8V are available on request. For all other output voltage options please contact your local NSC sales office. | 4-DSBGA | 0.25 V | Enable | 55 dB | Surface Mount | 3.6 V | Over Current, Over Temperature, Short Circuit | 75 µA | 200 mA | Positive | 27.03 °C/W | 5.5 V | 4-WFBGA, DSBGA | -40 °C | 85 °C | 1 | ||||||||
4-DSBGA | 0.25 V | Enable | 55 dB | Surface Mount | 3.3 V | Over Current, Over Temperature, Short Circuit | 75 µA | 200 mA | Positive | 27.03 °C/W | 5.5 V | 4-WFBGA, DSBGA | -40 °C | 85 °C | 1 | |||||||||
Texas Instruments LP5990TMX-1.2/NOPBThe LP5990 regulator is designed to meet the requirements of portable, battery-powered systems providing an accurate output voltage, low noise and low quiescent current.
The LP5990 will provide a 1.8V output from a low input voltage of 2.2V and can provide 200mA to an external load.
When switched into shutdown mode via a logic signal at the enable pin, the power consumption is reduced to virtually
zero.
Fast shut-down is achieved by the push pull architecture.
The LP5990 is designed to be stable with space saving 0402 ceramic capacitors as small as 1µF, this gives anoverall solutionsize of < 2.5mm2.
Performance is specified for a -40°C to 125°C junction temperature range.
The device is available in micro SMD Package (0.4mm pitch) and is available with 1.2V,1.3V,1.8V,2.8V,3.0V,3.3V and 3.6V outputs.Lower voltage options down to 0.8V are available on request. For all other output voltage options please contact your local NSC sales office.
The LP5990 regulator is designed to meet the requirements of portable, battery-powered systems providing an accurate output voltage, low noise and low quiescent current.
The LP5990 will provide a 1.8V output from a low input voltage of 2.2V and can provide 200mA to an external load.
When switched into shutdown mode via a logic signal at the enable pin, the power consumption is reduced to virtually
zero.
Fast shut-down is achieved by the push pull architecture.
The LP5990 is designed to be stable with space saving 0402 ceramic capacitors as small as 1µF, this gives anoverall solutionsize of < 2.5mm2.
Performance is specified for a -40°C to 125°C junction temperature range.
The device is available in micro SMD Package (0.4mm pitch) and is available with 1.2V,1.3V,1.8V,2.8V,3.0V,3.3V and 3.6V outputs.Lower voltage options down to 0.8V are available on request. For all other output voltage options please contact your local NSC sales office. | 4-DSBGA | 0.25 V | Enable | 55 dB | Surface Mount | 1.2 V | Over Current, Over Temperature, Short Circuit | 75 µA | 200 mA | Positive | 27.03 °C/W | 5.5 V | 4-WFBGA, DSBGA | -40 °C | 85 °C | 1 | ||||||||
Texas Instruments LP5990TMX-3.3/NOPBThe LP5990 regulator is designed to meet the requirements of portable, battery-powered systems providing an accurate output voltage, low noise and low quiescent current.
The LP5990 will provide a 1.8V output from a low input voltage of 2.2V and can provide 200mA to an external load.
When switched into shutdown mode via a logic signal at the enable pin, the power consumption is reduced to virtually
zero.
Fast shut-down is achieved by the push pull architecture.
The LP5990 is designed to be stable with space saving 0402 ceramic capacitors as small as 1µF, this gives anoverall solutionsize of < 2.5mm2.
Performance is specified for a -40°C to 125°C junction temperature range.
The device is available in micro SMD Package (0.4mm pitch) and is available with 1.2V,1.3V,1.8V,2.8V,3.0V,3.3V and 3.6V outputs.Lower voltage options down to 0.8V are available on request. For all other output voltage options please contact your local NSC sales office.
The LP5990 regulator is designed to meet the requirements of portable, battery-powered systems providing an accurate output voltage, low noise and low quiescent current.
The LP5990 will provide a 1.8V output from a low input voltage of 2.2V and can provide 200mA to an external load.
When switched into shutdown mode via a logic signal at the enable pin, the power consumption is reduced to virtually
zero.
Fast shut-down is achieved by the push pull architecture.
The LP5990 is designed to be stable with space saving 0402 ceramic capacitors as small as 1µF, this gives anoverall solutionsize of < 2.5mm2.
Performance is specified for a -40°C to 125°C junction temperature range.
The device is available in micro SMD Package (0.4mm pitch) and is available with 1.2V,1.3V,1.8V,2.8V,3.0V,3.3V and 3.6V outputs.Lower voltage options down to 0.8V are available on request. For all other output voltage options please contact your local NSC sales office. | 4-DSBGA | 0.25 V | Enable | 55 dB | Surface Mount | 3.3 V | Over Current, Over Temperature, Short Circuit | 75 µA | 200 mA | Positive | 27.03 °C/W | 5.5 V | 4-WFBGA, DSBGA | -40 °C | 85 °C | 1 | ||||||||
Texas Instruments LP5990TMX-3.6/NOPBThe LP5990 regulator is designed to meet the requirements of portable, battery-powered systems providing an accurate output voltage, low noise and low quiescent current.
The LP5990 will provide a 1.8V output from a low input voltage of 2.2V and can provide 200mA to an external load.
When switched into shutdown mode via a logic signal at the enable pin, the power consumption is reduced to virtually
zero.
Fast shut-down is achieved by the push pull architecture.
The LP5990 is designed to be stable with space saving 0402 ceramic capacitors as small as 1µF, this gives anoverall solutionsize of < 2.5mm2.
Performance is specified for a -40°C to 125°C junction temperature range.
The device is available in micro SMD Package (0.4mm pitch) and is available with 1.2V,1.3V,1.8V,2.8V,3.0V,3.3V and 3.6V outputs.Lower voltage options down to 0.8V are available on request. For all other output voltage options please contact your local NSC sales office.
The LP5990 regulator is designed to meet the requirements of portable, battery-powered systems providing an accurate output voltage, low noise and low quiescent current.
The LP5990 will provide a 1.8V output from a low input voltage of 2.2V and can provide 200mA to an external load.
When switched into shutdown mode via a logic signal at the enable pin, the power consumption is reduced to virtually
zero.
Fast shut-down is achieved by the push pull architecture.
The LP5990 is designed to be stable with space saving 0402 ceramic capacitors as small as 1µF, this gives anoverall solutionsize of < 2.5mm2.
Performance is specified for a -40°C to 125°C junction temperature range.
The device is available in micro SMD Package (0.4mm pitch) and is available with 1.2V,1.3V,1.8V,2.8V,3.0V,3.3V and 3.6V outputs.Lower voltage options down to 0.8V are available on request. For all other output voltage options please contact your local NSC sales office. | 4-DSBGA | 0.25 V | Enable | 55 dB | Surface Mount | 3.6 V | Over Current, Over Temperature, Short Circuit | 75 µA | 200 mA | Positive | 27.03 °C/W | 5.5 V | 4-WFBGA, DSBGA | -40 °C | 85 °C | 1 | ||||||||
Texas Instruments LP5990TMX-3.0/NOPBLinear Voltage Regulator IC Positive Fixed 1 Output 200mA 4-DSBGA | 4-DSBGA | 0.25 V | Enable | 55 dB | Surface Mount | Over Current, Over Temperature, Short Circuit | 75 µA | 200 mA | Positive | 27.03 °C/W | 5.5 V | 4-WFBGA, DSBGA | -40 °C | 85 °C | 1 | |||||||||
Texas Instruments LP5990TMX-1.8/NOPBThe LP5990 regulator is designed to meet the requirements of portable, battery-powered systems providing an accurate output voltage, low noise and low quiescent current.
The LP5990 will provide a 1.8V output from a low input voltage of 2.2V and can provide 200mA to an external load.
When switched into shutdown mode via a logic signal at the enable pin, the power consumption is reduced to virtually
zero.
Fast shut-down is achieved by the push pull architecture.
The LP5990 is designed to be stable with space saving 0402 ceramic capacitors as small as 1µF, this gives anoverall solutionsize of < 2.5mm2.
Performance is specified for a -40°C to 125°C junction temperature range.
The device is available in micro SMD Package (0.4mm pitch) and is available with 1.2V,1.3V,1.8V,2.8V,3.0V,3.3V and 3.6V outputs.Lower voltage options down to 0.8V are available on request. For all other output voltage options please contact your local NSC sales office.
The LP5990 regulator is designed to meet the requirements of portable, battery-powered systems providing an accurate output voltage, low noise and low quiescent current.
The LP5990 will provide a 1.8V output from a low input voltage of 2.2V and can provide 200mA to an external load.
When switched into shutdown mode via a logic signal at the enable pin, the power consumption is reduced to virtually
zero.
Fast shut-down is achieved by the push pull architecture.
The LP5990 is designed to be stable with space saving 0402 ceramic capacitors as small as 1µF, this gives anoverall solutionsize of < 2.5mm2.
Performance is specified for a -40°C to 125°C junction temperature range.
The device is available in micro SMD Package (0.4mm pitch) and is available with 1.2V,1.3V,1.8V,2.8V,3.0V,3.3V and 3.6V outputs.Lower voltage options down to 0.8V are available on request. For all other output voltage options please contact your local NSC sales office. | 4-DSBGA | 0.25 V | Enable | 55 dB | Surface Mount | 1.8 V | Over Current, Over Temperature, Short Circuit | 75 µA | 200 mA | Positive | 27.03 °C/W | 5.5 V | 4-WFBGA, DSBGA | -40 °C | 85 °C | 1 | ||||||||
Texas Instruments LP5990TM-1.2/NOPBThe LP5990 regulator is designed to meet the requirements of portable, battery-powered systems providing an accurate output voltage, low noise and low quiescent current.
The LP5990 will provide a 1.8V output from a low input voltage of 2.2V and can provide 200mA to an external load.
When switched into shutdown mode via a logic signal at the enable pin, the power consumption is reduced to virtually
zero.
Fast shut-down is achieved by the push pull architecture.
The LP5990 is designed to be stable with space saving 0402 ceramic capacitors as small as 1µF, this gives anoverall solutionsize of < 2.5mm2.
Performance is specified for a -40°C to 125°C junction temperature range.
The device is available in micro SMD Package (0.4mm pitch) and is available with 1.2V,1.3V,1.8V,2.8V,3.0V,3.3V and 3.6V outputs.Lower voltage options down to 0.8V are available on request. For all other output voltage options please contact your local NSC sales office.
The LP5990 regulator is designed to meet the requirements of portable, battery-powered systems providing an accurate output voltage, low noise and low quiescent current.
The LP5990 will provide a 1.8V output from a low input voltage of 2.2V and can provide 200mA to an external load.
When switched into shutdown mode via a logic signal at the enable pin, the power consumption is reduced to virtually
zero.
Fast shut-down is achieved by the push pull architecture.
The LP5990 is designed to be stable with space saving 0402 ceramic capacitors as small as 1µF, this gives anoverall solutionsize of < 2.5mm2.
Performance is specified for a -40°C to 125°C junction temperature range.
The device is available in micro SMD Package (0.4mm pitch) and is available with 1.2V,1.3V,1.8V,2.8V,3.0V,3.3V and 3.6V outputs.Lower voltage options down to 0.8V are available on request. For all other output voltage options please contact your local NSC sales office. | 4-DSBGA | 0.25 V | Enable | 55 dB | Surface Mount | 1.2 V | Over Current, Over Temperature, Short Circuit | 75 µA | 200 mA | Positive | 27.03 °C/W | 5.5 V | 4-WFBGA, DSBGA | -40 °C | 85 °C | 1 | ||||||||
Texas Instruments LP5990TM-3.0/NOPBThe LP5990 regulator is designed to meet the requirements of portable, battery-powered systems providing an accurate output voltage, low noise and low quiescent current.
The LP5990 will provide a 1.8V output from a low input voltage of 2.2V and can provide 200mA to an external load.
When switched into shutdown mode via a logic signal at the enable pin, the power consumption is reduced to virtually
zero.
Fast shut-down is achieved by the push pull architecture.
The LP5990 is designed to be stable with space saving 0402 ceramic capacitors as small as 1µF, this gives anoverall solutionsize of < 2.5mm2.
Performance is specified for a -40°C to 125°C junction temperature range.
The device is available in micro SMD Package (0.4mm pitch) and is available with 1.2V,1.3V,1.8V,2.8V,3.0V,3.3V and 3.6V outputs.Lower voltage options down to 0.8V are available on request. For all other output voltage options please contact your local NSC sales office.
The LP5990 regulator is designed to meet the requirements of portable, battery-powered systems providing an accurate output voltage, low noise and low quiescent current.
The LP5990 will provide a 1.8V output from a low input voltage of 2.2V and can provide 200mA to an external load.
When switched into shutdown mode via a logic signal at the enable pin, the power consumption is reduced to virtually
zero.
Fast shut-down is achieved by the push pull architecture.
The LP5990 is designed to be stable with space saving 0402 ceramic capacitors as small as 1µF, this gives anoverall solutionsize of < 2.5mm2.
Performance is specified for a -40°C to 125°C junction temperature range.
The device is available in micro SMD Package (0.4mm pitch) and is available with 1.2V,1.3V,1.8V,2.8V,3.0V,3.3V and 3.6V outputs.Lower voltage options down to 0.8V are available on request. For all other output voltage options please contact your local NSC sales office. | 4-DSBGA | 0.25 V | Enable | 55 dB | Surface Mount | Over Current, Over Temperature, Short Circuit | 75 µA | 200 mA | Positive | 27.03 °C/W | 5.5 V | 4-WFBGA, DSBGA | -40 °C | 85 °C | 1 | |||||||||
Texas Instruments LP5990TM-1.8EVLP5990 1 - Single Channels per IC Positive Fixed Linear Voltage Regulator Evaluation Board | 200 mA | LP5990 | 1.8 V | Board(s) | 5.5 V | 2.2 V | Fully Populated | Positive Fixed | 1 | |||||||||||||||
Texas Instruments LP5990TMX-2.8/NOPBThe LP5990 regulator is designed to meet the requirements of portable, battery-powered systems providing an accurate output voltage, low noise and low quiescent current.
The LP5990 will provide a 1.8V output from a low input voltage of 2.2V and can provide 200mA to an external load.
When switched into shutdown mode via a logic signal at the enable pin, the power consumption is reduced to virtually
zero.
Fast shut-down is achieved by the push pull architecture.
The LP5990 is designed to be stable with space saving 0402 ceramic capacitors as small as 1µF, this gives anoverall solutionsize of < 2.5mm2.
Performance is specified for a -40°C to 125°C junction temperature range.
The device is available in micro SMD Package (0.4mm pitch) and is available with 1.2V,1.3V,1.8V,2.8V,3.0V,3.3V and 3.6V outputs.Lower voltage options down to 0.8V are available on request. For all other output voltage options please contact your local NSC sales office.
The LP5990 regulator is designed to meet the requirements of portable, battery-powered systems providing an accurate output voltage, low noise and low quiescent current.
The LP5990 will provide a 1.8V output from a low input voltage of 2.2V and can provide 200mA to an external load.
When switched into shutdown mode via a logic signal at the enable pin, the power consumption is reduced to virtually
zero.
Fast shut-down is achieved by the push pull architecture.
The LP5990 is designed to be stable with space saving 0402 ceramic capacitors as small as 1µF, this gives anoverall solutionsize of < 2.5mm2.
Performance is specified for a -40°C to 125°C junction temperature range.
The device is available in micro SMD Package (0.4mm pitch) and is available with 1.2V,1.3V,1.8V,2.8V,3.0V,3.3V and 3.6V outputs.Lower voltage options down to 0.8V are available on request. For all other output voltage options please contact your local NSC sales office. | 4-DSBGA | 0.25 V | Enable | 55 dB | Surface Mount | 2.8 V | Over Current, Over Temperature, Short Circuit | 75 µA | 200 mA | Positive | 27.03 °C/W | 5.5 V | 4-WFBGA, DSBGA | -40 °C | 85 °C | 1 | ||||||||
Texas Instruments LP5990TM-1.8/NOPBThe LP5990 regulator is designed to meet the requirements of portable, battery-powered systems providing an accurate output voltage, low noise and low quiescent current.
The LP5990 will provide a 1.8V output from a low input voltage of 2.2V and can provide 200mA to an external load.
When switched into shutdown mode via a logic signal at the enable pin, the power consumption is reduced to virtually
zero.
Fast shut-down is achieved by the push pull architecture.
The LP5990 is designed to be stable with space saving 0402 ceramic capacitors as small as 1µF, this gives anoverall solutionsize of < 2.5mm2.
Performance is specified for a -40°C to 125°C junction temperature range.
The device is available in micro SMD Package (0.4mm pitch) and is available with 1.2V,1.3V,1.8V,2.8V,3.0V,3.3V and 3.6V outputs.Lower voltage options down to 0.8V are available on request. For all other output voltage options please contact your local NSC sales office.
The LP5990 regulator is designed to meet the requirements of portable, battery-powered systems providing an accurate output voltage, low noise and low quiescent current.
The LP5990 will provide a 1.8V output from a low input voltage of 2.2V and can provide 200mA to an external load.
When switched into shutdown mode via a logic signal at the enable pin, the power consumption is reduced to virtually
zero.
Fast shut-down is achieved by the push pull architecture.
The LP5990 is designed to be stable with space saving 0402 ceramic capacitors as small as 1µF, this gives anoverall solutionsize of < 2.5mm2.
Performance is specified for a -40°C to 125°C junction temperature range.
The device is available in micro SMD Package (0.4mm pitch) and is available with 1.2V,1.3V,1.8V,2.8V,3.0V,3.3V and 3.6V outputs.Lower voltage options down to 0.8V are available on request. For all other output voltage options please contact your local NSC sales office. | 4-DSBGA | 0.25 V | Enable | 55 dB | Surface Mount | 1.8 V | Over Current, Over Temperature, Short Circuit | 75 µA | 200 mA | Positive | 27.03 °C/W | 5.5 V | 4-WFBGA, DSBGA | -40 °C | 85 °C | 1 | ||||||||
Texas Instruments LP5990TM-2.8EVLP5990 1 - Single Channels per IC Positive Fixed Linear Voltage Regulator Evaluation Board | 200 mA | LP5990 | 2.8 V | Board(s) | 5.5 V | 2.2 V | Fully Populated | Positive Fixed | 1 |
Description
General part information
LP5990 Series
The LP5990 regulator is designed to meet the requirements of portable, battery-powered systems providing an accurate output voltage, low noise and low quiescent current.
The LP5990 will provide a 1.8V output from a low input voltage of 2.2V and can provide 200mA to an external load.
When switched into shutdown mode via a logic signal at the enable pin, the power consumption is reduced to virtually
Documents
Technical documentation and resources