Technical Specifications
Parameters and characteristics commom to parts in this series
| Specification | TPS2063DRG4 | TPS2063 Series |
|---|---|---|
| Current - Output (Max) [Max] | 1 A | 1 A |
| Fault Protection | UVLO, Over Temperature, Current Limiting (Fixed) | UVLO, Over Temperature, Current Limiting (Fixed) |
| Features | Status Flag | Status Flag |
| Input Type | Non-Inverting | Non-Inverting |
| Interface | On/Off | On/Off |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Outputs | 3 | 3 |
| Operating Temperature [Max] | 125 ¯C | 125 ¯C |
| Operating Temperature [Min] | -40 °C | -40 °C |
| Output Configuration | High Side | High Side |
| Output Type | N-Channel | N-Channel |
| Package / Case | 16-SOIC | 16-SOIC |
| Package / Case | 3.9 mm Width, 0.154 in | 0.154 - 3.9 mm Width |
| Ratio - Input:Output [custom] | 1:1, 1:2 | 1:1, 1:2 |
| Rds On (Typ) | 70 mOhm | 70 mOhm |
| Supplier Device Package | 16-SOIC | 16-SOIC |
| Switch Type | General Purpose | General Purpose |
| Voltage - Load [Max] | 5.5 V | 5.5 V |
| Voltage - Load [Min] | 2.7 V | 2.7 V |
| Voltage - Supply (Vcc/Vdd) | Not Required | Not Required |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
TPS2063 Series
3-ch, 1A loading, 2.7-5.5V, 70mΩ USB power switch, active-low
| Part | Switch Type | Output Type | Output Configuration | Operating Temperature [Max] | Operating Temperature [Min] | Number of Outputs | Interface | Supplier Device Package | Fault Protection | Input Type | Mounting Type | Current - Output (Max) [Max] | Rds On (Typ) | Ratio - Input:Output [custom] | Voltage - Supply (Vcc/Vdd) | Voltage - Load [Max] | Voltage - Load [Min] | Features | Package / Case | Package / Case |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS2063DRThe TPS206x power-distribution switches are intended for applications where heavy capacitive loads and short-circuits are likely to be encountered. This device incorporates 70mΩ N-channel MOSFET power switches for power-distribution systems that require multiple power switches in a single package. Each switch is controlled by a logic enable input. Gate drive is provided by an internal charge pump designed to control the power-switch rise times and fall times to minimize current surges during switching. The charge pump requires no external components and allows operation from supplies as low as 2.7V.
The TPS206x power-distribution switches are intended for applications where heavy capacitive loads and short-circuits are likely to be encountered. This device incorporates 70mΩ N-channel MOSFET power switches for power-distribution systems that require multiple power switches in a single package. Each switch is controlled by a logic enable input. Gate drive is provided by an internal charge pump designed to control the power-switch rise times and fall times to minimize current surges during switching. The charge pump requires no external components and allows operation from supplies as low as 2.7V. | General Purpose | N-Channel | High Side | 125 ¯C | -40 °C | 3 | On/Off | 16-SOIC | Current Limiting (Fixed), Over Temperature, UVLO | Non-Inverting | Surface Mount | 1 A | 70 mOhm | 1:1, 1:2 | Not Required | 5.5 V | 2.7 V | Status Flag | 16-SOIC | 0.154 in, 3.9 mm Width |
General Purpose | N-Channel | High Side | 125 ¯C | -40 °C | 3 | On/Off | 16-SOIC | Current Limiting (Fixed), Over Temperature, UVLO | Non-Inverting | Surface Mount | 1 A | 70 mOhm | 1:1, 1:2 | Not Required | 5.5 V | 2.7 V | Status Flag | 16-SOIC | 0.154 in, 3.9 mm Width | |
General Purpose | N-Channel | High Side | 125 ¯C | -40 °C | 3 | On/Off | 16-SOIC | Current Limiting (Fixed), Over Temperature, UVLO | Non-Inverting | Surface Mount | 1 A | 70 mOhm | 1:1, 1:2 | Not Required | 5.5 V | 2.7 V | Status Flag | 16-SOIC | 0.154 in, 3.9 mm Width | |
Texas Instruments TPS2063DThe TPS206x power-distribution switches are intended for applications where heavy capacitive loads and short-circuits are likely to be encountered. This device incorporates 70mΩ N-channel MOSFET power switches for power-distribution systems that require multiple power switches in a single package. Each switch is controlled by a logic enable input. Gate drive is provided by an internal charge pump designed to control the power-switch rise times and fall times to minimize current surges during switching. The charge pump requires no external components and allows operation from supplies as low as 2.7V.
The TPS206x power-distribution switches are intended for applications where heavy capacitive loads and short-circuits are likely to be encountered. This device incorporates 70mΩ N-channel MOSFET power switches for power-distribution systems that require multiple power switches in a single package. Each switch is controlled by a logic enable input. Gate drive is provided by an internal charge pump designed to control the power-switch rise times and fall times to minimize current surges during switching. The charge pump requires no external components and allows operation from supplies as low as 2.7V. | General Purpose | N-Channel | High Side | 125 ¯C | -40 °C | 3 | On/Off | 16-SOIC | Current Limiting (Fixed), Over Temperature, UVLO | Non-Inverting | Surface Mount | 1 A | 70 mOhm | 1:1, 1:2 | Not Required | 5.5 V | 2.7 V | Status Flag | 16-SOIC | 0.154 in, 3.9 mm Width |
Description
General part information
TPS2063 Series
The TPS206x power-distribution switches are intended for applications where heavy capacitive loads and short-circuits are likely to be encountered. This device incorporates 70mΩ N-channel MOSFET power switches for power-distribution systems that require multiple power switches in a single package. Each switch is controlled by a logic enable input. Gate drive is provided by an internal charge pump designed to control the power-switch rise times and fall times to minimize current surges during switching. The charge pump requires no external components and allows operation from supplies as low as 2.7V.
The TPS206x power-distribution switches are intended for applications where heavy capacitive loads and short-circuits are likely to be encountered. This device incorporates 70mΩ N-channel MOSFET power switches for power-distribution systems that require multiple power switches in a single package. Each switch is controlled by a logic enable input. Gate drive is provided by an internal charge pump designed to control the power-switch rise times and fall times to minimize current surges during switching. The charge pump requires no external components and allows operation from supplies as low as 2.7V.