Zenode.ai Logo
Log InSign Up

TPS2063 Series

3-ch, 1A loading, 2.7-5.5V, 70mΩ USB power switch, active-low

Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/

Catalog

3-ch, 1A loading, 2.7-5.5V, 70mΩ USB power switch, active-low

PartSwitch TypeOutput TypeOutput ConfigurationOperating Temperature [Max]Operating Temperature [Min]Number of OutputsInterfaceSupplier Device PackageFault ProtectionInput TypeMounting TypeCurrent - Output (Max) [Max]Rds On (Typ)Ratio - Input:Output [custom]Voltage - Supply (Vcc/Vdd)Voltage - Load [Max]Voltage - Load [Min]FeaturesPackage / CasePackage / Case
Texas Instruments
TPS2063DR
General Purpose
N-Channel
High Side
125 ¯C
-40 °C
3
On/Off
16-SOIC
Current Limiting (Fixed), Over Temperature, UVLO
Non-Inverting
Surface Mount
1 A
70 mOhm
1:1, 1:2
Not Required
5.5 V
2.7 V
Status Flag
16-SOIC
0.154 in, 3.9 mm Width
Texas Instruments
TPS2063DRG4
General Purpose
N-Channel
High Side
125 ¯C
-40 °C
3
On/Off
16-SOIC
Current Limiting (Fixed), Over Temperature, UVLO
Non-Inverting
Surface Mount
1 A
70 mOhm
1:1, 1:2
Not Required
5.5 V
2.7 V
Status Flag
16-SOIC
0.154 in, 3.9 mm Width
Texas Instruments
TPS2063DG4
General Purpose
N-Channel
High Side
125 ¯C
-40 °C
3
On/Off
16-SOIC
Current Limiting (Fixed), Over Temperature, UVLO
Non-Inverting
Surface Mount
1 A
70 mOhm
1:1, 1:2
Not Required
5.5 V
2.7 V
Status Flag
16-SOIC
0.154 in, 3.9 mm Width
Texas Instruments
TPS2063D
General Purpose
N-Channel
High Side
125 ¯C
-40 °C
3
On/Off
16-SOIC
Current Limiting (Fixed), Over Temperature, UVLO
Non-Inverting
Surface Mount
1 A
70 mOhm
1:1, 1:2
Not Required
5.5 V
2.7 V
Status Flag
16-SOIC
0.154 in, 3.9 mm Width

Key Features

• 70mΩ high-side MOSFET1A continuous currentThermal and short-circuit protectionAccurate current limit (1.1A min, 1.9A max)Operating range: 2.7V to 5.5V0.6ms typical rise timeUndervoltage lockoutDeglitched fault report ( OC)No OC Glitch during power up1µA maximum standby supply currentBidirectional switchAmbient temperature range: -40°C to 85°CBuilt-in soft-startUL listed - file no. E16991070mΩ high-side MOSFET1A continuous currentThermal and short-circuit protectionAccurate current limit (1.1A min, 1.9A max)Operating range: 2.7V to 5.5V0.6ms typical rise timeUndervoltage lockoutDeglitched fault report ( OC)No OC Glitch during power up1µA maximum standby supply currentBidirectional switchAmbient temperature range: -40°C to 85°CBuilt-in soft-startUL listed - file no. E169910

Description

AI
The TPS206x power-distribution switches are intended for applications where heavy capacitive loads and short-circuits are likely to be encountered. This device incorporates 70mΩ N-channel MOSFET power switches for power-distribution systems that require multiple power switches in a single package. Each switch is controlled by a logic enable input. Gate drive is provided by an internal charge pump designed to control the power-switch rise times and fall times to minimize current surges during switching. The charge pump requires no external components and allows operation from supplies as low as 2.7V. The TPS206x power-distribution switches are intended for applications where heavy capacitive loads and short-circuits are likely to be encountered. This device incorporates 70mΩ N-channel MOSFET power switches for power-distribution systems that require multiple power switches in a single package. Each switch is controlled by a logic enable input. Gate drive is provided by an internal charge pump designed to control the power-switch rise times and fall times to minimize current surges during switching. The charge pump requires no external components and allows operation from supplies as low as 2.7V.