TPS24771RGER
Active2.5-V TO 18-V HOT SWAP CONTROLLER WITH HIGH PERFORMANCE WITH ANALOG CURRENT MONITOR
Deep-Dive with AI
Search across all available documentation for this part.
TPS24771RGER
Active2.5-V TO 18-V HOT SWAP CONTROLLER WITH HIGH PERFORMANCE WITH ANALOG CURRENT MONITOR
Deep-Dive with AI
Technical Specifications
Parameters and characteristics commom to parts in this series
| Specification | TPS24771RGER | TPS24771 Series |
|---|---|---|
| Applications | General Purpose | General Purpose |
| Current - Supply | 2.95 mA | 2.95 mA |
| Features | Auto Retry | Auto Retry |
| Internal Switch(s) | False | False |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Channels [custom] | 1 | 1 |
| Operating Temperature [Max] | 125 °C | 125 °C |
| Operating Temperature [Min] | -40 °C | -40 °C |
| Package / Case | 24-VFQFN Exposed Pad | 24-VFQFN Exposed Pad |
| Programmable Features | Current Limit, Fault Timeout, UVLO, Slew Rate, OVP | Current Limit, Fault Timeout, UVLO, Slew Rate, OVP |
| Supplier Device Package | 24-VQFN (4x4) | 24-VQFN (4x4) |
| Type | Hot Swap Controller | Hot Swap Controller |
| Voltage - Supply [Max] | 18 V | 18 V |
| Voltage - Supply [Min] | 2.5 V | 2.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
TPS24771 Series
2.5-V to 18-V hot swap controller with high performance with analog current monitor
| Part | Programmable Features | Mounting Type | Voltage - Supply [Max] | Voltage - Supply [Min] | Features | Number of Channels [custom] | Package / Case | Current - Supply | Type | Operating Temperature [Max] | Operating Temperature [Min] | Supplier Device Package | Internal Switch(s) | Applications |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS24771RGERThe TPS2477x is a high performance analog Hot Swap Controller for 2.5 V to 18 V systems. The precise and highly programmable protection settings of the TPS2477x aid the design of high power high availability systems where isolating faults is critical.
Programmable current limit, fast shut down, and fault timer protect the load and supply during fault conditions such as a hot - short. The fast shutdown threshold can be tuned to ensure a fast response to real faults, while avoiding nuisance trips. Programmable Safe Operating Area (SOA) protection and the inrush timer keep the MOSFET safe under all conditions. After asserting power good, TPS2477x acts as a circuit breaker and runs the fault timer during over current events, but doesn’t current limit. It shuts down after the fault timer expires. Two independent timers (inrush/fault) allow the user to customize protection based on system requirements.
Finally, the flexibility of the TPS2477x aid Hot Swap design for the 240 VA requirement and a design example is shown in the datasheet.
The TPS2477x is a high performance analog Hot Swap Controller for 2.5 V to 18 V systems. The precise and highly programmable protection settings of the TPS2477x aid the design of high power high availability systems where isolating faults is critical.
Programmable current limit, fast shut down, and fault timer protect the load and supply during fault conditions such as a hot - short. The fast shutdown threshold can be tuned to ensure a fast response to real faults, while avoiding nuisance trips. Programmable Safe Operating Area (SOA) protection and the inrush timer keep the MOSFET safe under all conditions. After asserting power good, TPS2477x acts as a circuit breaker and runs the fault timer during over current events, but doesn’t current limit. It shuts down after the fault timer expires. Two independent timers (inrush/fault) allow the user to customize protection based on system requirements.
Finally, the flexibility of the TPS2477x aid Hot Swap design for the 240 VA requirement and a design example is shown in the datasheet. | Current Limit, Fault Timeout, OVP, Slew Rate, UVLO | Surface Mount | 18 V | 2.5 V | Auto Retry | 1 | 24-VFQFN Exposed Pad | 2.95 mA | Hot Swap Controller | 125 °C | -40 °C | 24-VQFN (4x4) | General Purpose | |
Texas Instruments TPS24771RGETThe TPS2477x is a high performance analog Hot Swap Controller for 2.5 V to 18 V systems. The precise and highly programmable protection settings of the TPS2477x aid the design of high power high availability systems where isolating faults is critical.
Programmable current limit, fast shut down, and fault timer protect the load and supply during fault conditions such as a hot - short. The fast shutdown threshold can be tuned to ensure a fast response to real faults, while avoiding nuisance trips. Programmable Safe Operating Area (SOA) protection and the inrush timer keep the MOSFET safe under all conditions. After asserting power good, TPS2477x acts as a circuit breaker and runs the fault timer during over current events, but doesn’t current limit. It shuts down after the fault timer expires. Two independent timers (inrush/fault) allow the user to customize protection based on system requirements.
Finally, the flexibility of the TPS2477x aid Hot Swap design for the 240 VA requirement and a design example is shown in the datasheet.
The TPS2477x is a high performance analog Hot Swap Controller for 2.5 V to 18 V systems. The precise and highly programmable protection settings of the TPS2477x aid the design of high power high availability systems where isolating faults is critical.
Programmable current limit, fast shut down, and fault timer protect the load and supply during fault conditions such as a hot - short. The fast shutdown threshold can be tuned to ensure a fast response to real faults, while avoiding nuisance trips. Programmable Safe Operating Area (SOA) protection and the inrush timer keep the MOSFET safe under all conditions. After asserting power good, TPS2477x acts as a circuit breaker and runs the fault timer during over current events, but doesn’t current limit. It shuts down after the fault timer expires. Two independent timers (inrush/fault) allow the user to customize protection based on system requirements.
Finally, the flexibility of the TPS2477x aid Hot Swap design for the 240 VA requirement and a design example is shown in the datasheet. | Current Limit, Fault Timeout, OVP, Slew Rate, UVLO | Surface Mount | 18 V | 2.5 V | Auto Retry | 1 | 24-VFQFN Exposed Pad | 2.95 mA | Hot Swap Controller | 125 °C | -40 °C | 24-VQFN (4x4) | General Purpose |
Description
General part information
TPS24771 Series
The TPS2477x is a high performance analog Hot Swap Controller for 2.5 V to 18 V systems. The precise and highly programmable protection settings of the TPS2477x aid the design of high power high availability systems where isolating faults is critical.
Programmable current limit, fast shut down, and fault timer protect the load and supply during fault conditions such as a hot - short. The fast shutdown threshold can be tuned to ensure a fast response to real faults, while avoiding nuisance trips. Programmable Safe Operating Area (SOA) protection and the inrush timer keep the MOSFET safe under all conditions. After asserting power good, TPS2477x acts as a circuit breaker and runs the fault timer during over current events, but doesn’t current limit. It shuts down after the fault timer expires. Two independent timers (inrush/fault) allow the user to customize protection based on system requirements.
Finally, the flexibility of the TPS2477x aid Hot Swap design for the 240 VA requirement and a design example is shown in the datasheet.