TPS24771 Series
2.5-V to 18-V hot swap controller with high performance with analog current monitor
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
2.5-V to 18-V hot swap controller with high performance with analog current monitor
| Part | Programmable Features | Mounting Type | Voltage - Supply [Max] | Voltage - Supply [Min] | Features | Number of Channels [custom] | Package / Case | Current - Supply | Type | Operating Temperature [Max] | Operating Temperature [Min] | Supplier Device Package | Internal Switch(s) | Applications |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS24771RGER | Current Limit, Fault Timeout, OVP, Slew Rate, UVLO | Surface Mount | 18 V | 2.5 V | Auto Retry | 1 | 24-VFQFN Exposed Pad | 2.95 mA | Hot Swap Controller | 125 °C | -40 °C | 24-VQFN (4x4) | General Purpose | |
Texas Instruments TPS24771RGET | Current Limit, Fault Timeout, OVP, Slew Rate, UVLO | Surface Mount | 18 V | 2.5 V | Auto Retry | 1 | 24-VFQFN Exposed Pad | 2.95 mA | Hot Swap Controller | 125 °C | -40 °C | 24-VQFN (4x4) | General Purpose |
Key Features
• 2.5V to 18V Bus Operation (30V abs max)Programmable Protection Settings:Current Limit: ±5% at 10mVFast Trip: ±10% at 20mVProgrammable FET SOA ProtectionProgramable Response Time for Fast TripDual Timer (Inrush/Fault)Analog Current Monitor (1% at 25mV)Programmable UV and OVStatus Flags for Faults and Power Good4mm × 4mm 24-pin QFN70 = Latch, 71 = Retry, 72 = Fast Latch Off2.5V to 18V Bus Operation (30V abs max)Programmable Protection Settings:Current Limit: ±5% at 10mVFast Trip: ±10% at 20mVProgrammable FET SOA ProtectionProgramable Response Time for Fast TripDual Timer (Inrush/Fault)Analog Current Monitor (1% at 25mV)Programmable UV and OVStatus Flags for Faults and Power Good4mm × 4mm 24-pin QFN70 = Latch, 71 = Retry, 72 = Fast Latch Off
Description
AI
The TPS2477x is a high performance analog Hot Swap Controller for 2.5 V to 18 V systems. The precise and highly programmable protection settings of the TPS2477x aid the design of high power high availability systems where isolating faults is critical.
Programmable current limit, fast shut down, and fault timer protect the load and supply during fault conditions such as a hot - short. The fast shutdown threshold can be tuned to ensure a fast response to real faults, while avoiding nuisance trips. Programmable Safe Operating Area (SOA) protection and the inrush timer keep the MOSFET safe under all conditions. After asserting power good, TPS2477x acts as a circuit breaker and runs the fault timer during over current events, but doesn’t current limit. It shuts down after the fault timer expires. Two independent timers (inrush/fault) allow the user to customize protection based on system requirements.
Finally, the flexibility of the TPS2477x aid Hot Swap design for the 240 VA requirement and a design example is shown in the datasheet.
The TPS2477x is a high performance analog Hot Swap Controller for 2.5 V to 18 V systems. The precise and highly programmable protection settings of the TPS2477x aid the design of high power high availability systems where isolating faults is critical.
Programmable current limit, fast shut down, and fault timer protect the load and supply during fault conditions such as a hot - short. The fast shutdown threshold can be tuned to ensure a fast response to real faults, while avoiding nuisance trips. Programmable Safe Operating Area (SOA) protection and the inrush timer keep the MOSFET safe under all conditions. After asserting power good, TPS2477x acts as a circuit breaker and runs the fault timer during over current events, but doesn’t current limit. It shuts down after the fault timer expires. Two independent timers (inrush/fault) allow the user to customize protection based on system requirements.
Finally, the flexibility of the TPS2477x aid Hot Swap design for the 240 VA requirement and a design example is shown in the datasheet.