Texas Instruments
Texas Instruments Incorporated (TI) is a global semiconductor design and manufacturing company that develops analog ICs and embedded processors. By employing the worlds brightest minds, TI creates innovations that shape the future of technology. TI is helping more than 100,000 customers transform the future, today.
Series List(7161)
| Part | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Logic | 1 | 1 | These 8-bit flip-flops feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. The devices are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. These 8-bit flip-flops feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. The... Read More | |
Texas Instruments5962-8768101Radiation-tolerant QMLV, 30-V input, 1.5-A dual-output 1-MHz PWM controller | Power Management (PMIC) | 2 | 1 | The UC1825 PWM control device is optimized for high-frequency switched mode power supply applications. Particular care was given to minimizing propagation delays through the comparators and logic circuitry while maximizing bandwidth and slew rate of the error amplifier. This controller is designed for use in either current-mode or voltage mode... Read More |
Texas Instruments5962-8768105Radiation-tolerant QMLV, 30-V input, 2-A dual-output 1-MHz PWM controller | Power Management (PMIC) | 1 | 1 | The UC1825A-SP PWM controller is a radiation hardened version of the standard UC1825 family. Performance enhancements have been made to several of the circuit blocks. Error amplifier gain bandwidth product is 12 MHz, while input offset voltage is 2 mV. Current limit threshold is assured to a tolerance of 5%.... Read More |
Texas Instruments5962-8769901Military 4-ch, 2-input, 4.5-V to 5.5-V NAND gates with TTL-compatible CMOS inputs | Logic | 1 | 1 | The ‘ACT00 devices contain four independent 2-input NAND gates. Each gate performs the Boolean function of Y = A•B or Y = A+B in positive logic. The ‘ACT00 devices contain four independent 2-input NAND gates. Each gate performs the Boolean function of Y = A•B or Y = A+B in... Read More |
| Signal Switches, Multiplexers, Decoders | 1 | 1 | High Speed CMOS Logic BCD-to-7 Segment Latch/Decoder/Driver | |
| Logic | 1 | 1 | The ’AC245 octal bus transceivers are designed for asynchronous two-way communication between data buses. The control-function implementation minimizes external timing requirements. The devices allow data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the... Read More | |
Texas Instruments5962-8984701Military 8-ch, 4.5-V to 5.5-V buffers with TTL-compatible CMOS inputs and 3-state outputs | Logic | 1 | 1 | These octal buffers and line drivers are designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. These octal buffers and line drivers are designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and... Read More |
Texas Instruments5962-87767012Military 8-ch, 4.5-V to 5.5-V bipolar buffers with open-collector outputs | Logic | 1 | 1 | These octal buffers and line drivers are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters by eliminating the need for 3-state overlap protection. With the ´AS756 and SN74AS757, these devices provide the choice of selected combinations of... Read More |
| Shift Registers | 1 | 1 | SN54LS673, SN74LS673 The 'LS673 is a 16-bit shift register and a 16-bit storage register in a single 24-pin package. A three-state input/output (SER/Q15) port to the shift register allows serial entry and/or reading of data. The storage register is connected in a parallel data loop with the shift register and... Read More | |
| Logic | 1 | 1 | These devices consist of bus-transceiver circuits, D-type flip-flops, and control circuitry arranged for multiplexed transmission of data directly from the data bus or from the internal storage registers. Output-enable (OEAB and OEBA\) inputs are provided to control the transceiver functions. Select-control (SAB and SBA) inputs are provided to select real-time... Read More | |
Texas Instruments5962-88682012Dual 4-Line To 1-Line Data Selectors/Multiplexers With 3-State Outputs | Signal Switches, Multiplexers, Decoders | 1 | 1 | Dual 4-Line To 1-Line Data Selectors/Multiplexers With 3-State Outputs |
| Logic | 1 | 1 | These 8-bit addressable latches are designed for general-purpose storage applications in digital systems. Specific uses include working registers, serial-holding registers, and active-high decoders or demultiplexers. They are multifunctional devices capable of storing single-line data in eight addressable latches and being a 1-of-8 decoder or demultiplexer with active-high outputs. Four distinct... Read More | |
Texas Instruments5962-8874201Military 6-ch, 4.5-V to 5.5-V bipolar buffers with open-collector outputs | Logic | 1 | 1 | These devices contain six independent noninverting buffers. They perform the Boolean function Y = A. The open-collector outputs require pullup resistors to perform correctly. They can be connected to other open-collector outputs to implement active-low wired-OR or active-high wired-AND functions. Open-collector devices are often used to generate higher VOHlevels. These... Read More |
| Logic | 10 | 1 | The ’AC10 devices contain three independent 3-input NAND gates. The devices perform the Boolean function Y = A • B • C or Y = A + B + C in positive logic. The ’AC10 devices contain three independent 3-input NAND gates. The devices perform the Boolean function Y =... Read More | |
| Power Management - Specialized | 1 | 1 | The UC1901 family is designed to solve many of the problems associated with closing a feedback control loop across a voltage isolation boundary. As a stable and reliable alternative to an optical coupler, these devices feature an amplitude modulation system which allows a loop error signal to be coupled with... Read More | |
| Power Management (PMIC) | 1 | 1 | The UC1525B pulse width modulator integrated circuit is designed to offer improved performance and lowered external parts count when used in designing all types of switching power supplies. The on-chip 5.1-V buried zener reference is trimmed to ±0.75%, and the input common-mode range of the error amplifier includes the reference... Read More | |
Texas Instruments5962-8970801High Speed CMOS Logic Inverting Quad 2-Input Multiplexer with 3-State Outputs | Signal Switches, Multiplexers, Decoders | 1 | 1 | These devices are designed to multiplex signals from 4-bit data sources to 4-output data lines in bus-organized systems. The 3-state outputs do not load the data lines when the output-enable (G)\ input is at a high logic level. To ensure the high-impedance state during power up or power down, G\... Read More |
| Logic | 1 | 1 | This device contains one independent 8-input NAND gate. Each gate performs the Boolean function Y =A ● B ● C ● D ● E ● F ● G ● Hin positive logic. This device contains one independent 8-input NAND gate. Each gate performs the Boolean function Y =A ● B... Read More | |
| Signal Switches, Multiplexers, Decoders | 1 | 1 | These advanced Schottky devices are capable of performing high-speed arithmetic or logic comparisons on two 8-bit binary or two's complement words. Two fully decoded decisions about words P and Q are externally available at two outputs. These devices are fully expandable to any number of bits without external gates. To... Read More | |
| Logic | 1 | 1 | The ’HC377 and ’HCT377 are octal D-type flip-flops with a buffered clock (CP) common to all eight flip-flops. All the flip-flops are loaded simultaneously on the positive edge of the clock (CP) when the Data Enable (E\) is Low. The ’HC377 and ’HCT377 are octal D-type flip-flops with a buffered... Read More | |