Texas Instruments
Texas Instruments Incorporated (TI) is a global semiconductor design and manufacturing company that develops analog ICs and embedded processors. By employing the worlds brightest minds, TI creates innovations that shape the future of technology. TI is helping more than 100,000 customers transform the future, today.
Series List(7161)
| Part | Category | # Parts | Status | Description |
|---|---|---|---|---|
Texas Instruments54HCT240Military 8-ch, 4.5-V to 5.5-V inverters with TTL-compatible CMOS inputs and 3-state outputs | Logic | 1 | 1 | These octal buffers and line drivers are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The ’HCT240 devices are organized as two 4-bit buffers/drivers with separate output-enable (OE) inputs. When OE is low, the device passes inverted... Read More |
| Specialty Logic | 1 | 1 | The 'LS181 and 'S181 are arithmetic logic units (ALU)/function generators that have a complexity of 75 equivalent gates on a monolithic chip. These circuits perform 16 binary arithmetic operations on two 4-bit words as shown in Tables 1 and 2. These operations are selected by the four function-select lines (S0,... Read More | |
Texas Instruments54LS21Military, 2-ch, 4-input, 4.5-V to 5.5-V 16-mA drive strength bipolar AND gate | Logic | 1 | 1 | These devices contain two independent 4-input AND gates. The SN54LS21 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74LS21 is characterized for operation from 0°C to 70°C. These devices contain two independent 4-input AND gates. The SN54LS21 is characterized for operation over the... Read More |
| Logic | 1 | 1 | The ’279 offers 4 basic S\-R\ flip-flop latches in one 16-pin, 300-mil package. Under conventional operation, the S\-R\ inputs are normally held high. When the S\ input is pulsed low, the Q output will be set high. When R\ is pulsed low, the Q output will be reset low. Normally,... Read More | |
| Logic | 2 | 1 | Each of these monolithic counters contains four master-slave flip-flops and additional gating to provide a divide-by-two counter and a three-stage binary counter for which the count cycle length is divide-by-five for the '90A and 'LS90, divide-by-six for the '92A and 'LS92, and the divide-by eight for the '93A and 'LS93.... Read More | |
| Interface | 1 | 1 | The HVD251 is intended for use in applications employing the Controller Area Network (CAN) serial communication physical layer in accordance with the ISO 11898 Standard. The HVD251 provides differential transmit capability to the bus and differential receive capability to a CAN controller at speeds up to 1 megabits per second... Read More | |
| Interface | 2 | 1 | The SN55LBC180, SN65LBC180 and SN75LBC180 combine a differential line driver and receiver with 3-state outputs and operate from a single 5-V supply. The driver and receiver have active-high and active-low enables, respectively, which can be externally connected to function as a direction control. The driver differential outputs and the receiver... Read More | |
Texas Instruments5962-8515401High Speed CMOS Logic Dual Negative-Edge Trigger J-K Flip-Flops with Reset | Logic | 1 | 1 | The ’HC107 and ’HCT107 utilize silicon gate CMOS technology to achieve operating speeds equivalent to LSTTL parts. They exhibit the low power consumption of standard CMOS integrated circuits, together with the ability to drive 10 LSTTL loads. These flip-flops have independent J, K, Reset and Clock inputs and Q and... Read More |
| Power Supply Controllers, Monitors | 1 | 1 | The UCx84x series of control integrated circuits provide the features that are necessary to implement off-line or DC-to-DC fixed-frequency current-mode control schemes, with a minimum number of external components. The internally implemented circuits include an undervoltage lockout (UVLO), featuring a start-up current of less than 1mA, and a precision reference... Read More | |
Texas Instruments5962-8670409Radiation-tolerant QMLV, enhanced 30-V input, 1-A 500-kHz PWM controller, 100% duty cycle | Power Management (PMIC) | 1 | 1 | The UC1843A-SP control IC is a radiation hardened pin-for-pin compatible version of the UC184x family. Providing the necessary characteristics to control current-mode switched-mode power supplies, this device has improved features. Start-up current is specified to be less than 0.5 mA and oscillator discharge is trimmed to 8.3 mA. During UVLO,... Read More |
Texas Instruments5962-8680601Radiation-tolerant QMLV, 40-V input, 0.5-A dual-output 500-kHz PWM controller | Power Management (PMIC) | 1 | 1 | The UC1846-SP control devices provide all of the necessary features to implement fixed frequency, current mode control schemes while maintaining a minimum external parts count. The superior performance of this technique can be measured in improved line regulation, enhanced load response characteristics, and a simpler, easier-to-design control loop. Topological advantages... Read More |
Texas Instruments5962-8681501High Speed CMOS Logic Octal D-Type Positive-Edge Triggered Inverting Flip-Flops with 3-State Outputs | Logic | 1 | 1 | High Speed CMOS Logic Octal D-Type Positive-Edge Triggered Inverting Flip-Flops with 3-State Outputs |
| Logic | 1 | 1 | These devices contain an 8-input positive-NAND gate and perform the following Boolean functions in positive logic: Y =A • B •C • D • E • F • G • H or Y =A+B+C+D+E+F+G These devices contain an 8-input positive-NAND gate and perform the following Boolean functions in positive logic:... Read More | |
| Logic | 1 | 1 | These octal buffers and line drivers are designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. With the ´ALS240A, ´ALS241C, ´AS240A, and ´AS241A, these devices provide the choice of selected combinations of inverting outputs, symmetrical active-low output-enable () inputs,... Read More | |
| Logic | 1 | 1 | These octal buffers and line drivers are designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. With the ´ALS240A, ´ALS241C, ´AS240A, and ´AS241A, these devices provide the choice of selected combinations of inverting outputs, symmetrical active-low output-enable () inputs,... Read More | |
| Logic | 1 | 1 | These devices contain four independent 2-input positive-NOR gates. They perform the Boolean functionsor Y = A\ \x95 B\ in positive logic. The SN54ALS02A and SN54AS02 are characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ALS02A and SN74AS02 are characterized for operation from 0°C to... Read More | |
Texas Instruments5962-8685201Military, 4-ch 2-input 4.5-V to 5.5-V OR gate with TTL-compatible inputs | Logic | 1 | 1 | This device contains four independent 2-input OR gates. Each gate performs the Boolean function Y = A + B in positive logic.
This device contains four independent 2-input OR gates. Each gate performs the Boolean function Y = A + B in positive logic. |
| Signal Switches, Multiplexers, Decoders | 1 | 1 | The ´ALS138A and ´AS138 are 3-line to 8-line decoders/demultiplexers designed for high-performance memory-decoding or data-routing applications requiring very short propagation delay times. In high-performance systems, these devices can be used to minimize the effects of system decoding. When employed with high-speed memories with a fast enable circuit, the delay times... Read More | |
| Logic | 2 | 1 | The ’ACT74 dual positive-edge-triggered devices are D-type flip-flops.
The ’ACT74 dual positive-edge-triggered devices are D-type flip-flops. | |
| Logic | 1 | 1 | The ‘AC00 devices contain four independent 2-input NAND gates. Each gate performs the Boolean function of Y = A • B or Y = A + B in positive logic. The ‘AC00 devices contain four independent 2-input NAND gates. Each gate performs the Boolean function of Y = A •... Read More | |