DAC5573 Series

8-bit, quad DAC with I2C Interface in a tiny TSSOP package

Link to Manufacturer Page: https://www.ti.com/

Catalog

8-bit, quad DAC with I2C Interface in a tiny TSSOP package

Part	Package / Case [x]	Package / Case	Package / Case [x]	INL/DNL (LSB) [Max]	INL/DNL (LSB) [Min]	Voltage - Supply, Digital [Max]	Voltage - Supply, Digital [Min]	Number of Bits	Architecture	Settling Time	Data Interface	Supplier Device Package	Operating Temperature [Min]	Operating Temperature [Max]	Voltage - Supply, Analog [Max]	Voltage - Supply, Analog [Min]	Number of D/A Converters	Mounting Type	Output Type	Reference Type	Sampling Rate (Per Second)	Supplied Contents	Utilized IC / Part	Number of DAC's	DAC Type
Texas Instruments DAC5573IPWG4	0.173 "	16-TSSOP	4.4 mm	1.1 LSB, 1.4 LSB	-1.4 LSB, -1.1 LSB	5.5 V	2.7 V	8	String DAC	12 µs	I2C	16-TSSOP	-40 °C	105 ░C	5.5 V	2.7 V	4	Surface Mount	Voltage - Buffered	External
Texas Instruments DAC5573IPWR	0.173 "	16-TSSOP	4.4 mm	1.1 LSB, 1.4 LSB	-1.4 LSB, -1.1 LSB	5.5 V	2.7 V	8	String DAC	12 µs	I2C	16-TSSOP	-40 °C	105 ░C	5.5 V	2.7 V	4	Surface Mount	Voltage - Buffered	External
Texas Instruments DAC5573IPWRG4	0.173 "	16-TSSOP	4.4 mm	1.1 LSB, 1.4 LSB	-1.4 LSB, -1.1 LSB	5.5 V	2.7 V	8	String DAC	12 µs	I2C	16-TSSOP	-40 °C	105 ░C	5.5 V	2.7 V	4	Surface Mount	Voltage - Buffered	External
Texas Instruments DAC5573IPW	0.173 "	16-TSSOP	4.4 mm	1.1 LSB, 1.4 LSB	-1.4 LSB, -1.1 LSB	5.5 V	2.7 V	8	String DAC	12 µs	I2C	16-TSSOP	-40 °C	105 ░C	5.5 V	2.7 V	4	Surface Mount	Voltage - Buffered	External
Texas Instruments DAC5573EVM								8		6 µs	I2C										188k	Board(s)	DAC5573	4	Voltage

Key Features

• Micropower Operation: 500 µA at 3 V VDDFast Update Rate: 188 kSPSPower-On Reset to Zero2.7-V to 5.5-V Analog Power Supply8-Bit MonotonicI2C™ Interface up to 3.4 MbpsData Transmit CapabilityRail-to-Rail Output Buffer AmplifierDouble-Buffered Input RegisterAddress Support for up to Sixteen DAC5573sSynchronous Update for up to 64 ChannelsVoltage Translators for all Digital InputsOperation From –40°C to 105°CSmall 16 Lead TSSOP PackageAPPLICATIONSProcess ControlData Acquisition SystemsClosed-Loop Servo ControlPC PeripheralsPortable InstrumentationI2C is a trademark of Philips Corporation.Micropower Operation: 500 µA at 3 V VDDFast Update Rate: 188 kSPSPower-On Reset to Zero2.7-V to 5.5-V Analog Power Supply8-Bit MonotonicI2C™ Interface up to 3.4 MbpsData Transmit CapabilityRail-to-Rail Output Buffer AmplifierDouble-Buffered Input RegisterAddress Support for up to Sixteen DAC5573sSynchronous Update for up to 64 ChannelsVoltage Translators for all Digital InputsOperation From –40°C to 105°CSmall 16 Lead TSSOP PackageAPPLICATIONSProcess ControlData Acquisition SystemsClosed-Loop Servo ControlPC PeripheralsPortable InstrumentationI2C is a trademark of Philips Corporation.

Description

The DAC5573 is a low-power, quad channel, 8-bit buffered voltage output DAC. Its on-chip precision output amplifier allows rail-to-rail output swing. The DAC5573 utilizes an I2C-compatible two-wire serial interface supporting high-speed interface mode with address support of up to sixteen DAC5573s for a total of 64 channels on the bus. The DAC5573 requires an external reference voltage to set the output range of the DAC. The DAC5573 incorporates a power-on-reset circuit that ensures that the DAC output powers up at zero volts and remains there until a valid write takes place in the device. The DAC5573 contains a power-down feature, accessed via the internal control register, that reduces the current consumption of the device to 200 nA at 5 V. The low power consumption of this part in normal operation makes it ideally suited to portable battery operated equipment. The power consumption is less than 3 mW at VDD=5 V reducing to 1 µW in power-down mode The DAC5573 is available in a 16-lead TSSOP package. The DAC5573 is a low-power, quad channel, 8-bit buffered voltage output DAC. Its on-chip precision output amplifier allows rail-to-rail output swing. The DAC5573 utilizes an I2C-compatible two-wire serial interface supporting high-speed interface mode with address support of up to sixteen DAC5573s for a total of 64 channels on the bus. The DAC5573 requires an external reference voltage to set the output range of the DAC. The DAC5573 incorporates a power-on-reset circuit that ensures that the DAC output powers up at zero volts and remains there until a valid write takes place in the device. The DAC5573 contains a power-down feature, accessed via the internal control register, that reduces the current consumption of the device to 200 nA at 5 V. The low power consumption of this part in normal operation makes it ideally suited to portable battery operated equipment. The power consumption is less than 3 mW at VDD=5 V reducing to 1 µW in power-down mode The DAC5573 is available in a 16-lead TSSOP package.