DRV8802 Series
Automotive, 47-V, 1.6-A, dual H-bridge motor driver with current regulation
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
Automotive, 47-V, 1.6-A, dual H-bridge motor driver with current regulation
| Part | Current - Output | Applications | Function | Supplier Device Package | Voltage - Supply [Max] | Voltage - Supply [Min] | Mounting Type | Technology | Motor Type - AC, DC | Grade | Package / Case | Operating Temperature [Max] | Operating Temperature [Min] | Interface | Output Configuration | Qualification | Voltage - Load [Min] | Voltage - Load [Max] | Utilized IC / Part | Supplied Contents | Type | Embedded | Primary Attributes [Min] | Primary Attributes | Primary Attributes | Primary Attributes [Max] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments DRV8802QPWPRQ1 | 1.1 A | General Purpose | Driver - Fully Integrated, Control and Power Stage | 28-HTSSOP | 45 V | 8.2 V | Surface Mount | Power MOSFET | Brushed DC | Automotive | 28-PowerTSSOP | 150 C | -40 °C | Parallel | Half Bridge (4) | AEC-Q100 | 8.2 V | 45 V | ||||||||
Texas Instruments DRV8802PWP | 1.1 A | General Purpose | Driver - Fully Integrated, Control and Power Stage | 28-HTSSOP | 45 V | 8.2 V | Surface Mount | Power MOSFET | Brushed DC | 28-PowerTSSOP | 150 C | -40 °C | Parallel | Half Bridge (4) | 8.2 V | 45 V | ||||||||||
Texas Instruments DRV8802EVM | Motor Controller/Driver | DRV8802 | Board(s) | Power Management | Yes, MCU, 16-Bit | 8.2 V | 1.1 A | Dual Full-Bridge (H-Bridge) | 45 V | |||||||||||||||||
Texas Instruments DRV8802PWPR | 1.1 A | General Purpose | Driver - Fully Integrated, Control and Power Stage | 28-HTSSOP | 45 V | 8.2 V | Surface Mount | Power MOSFET | Brushed DC | 28-PowerTSSOP | 150 C | -40 °C | Parallel | Half Bridge (4) | 8.2 V | 45 V |
Key Features
• Qualified for Automotive ApplicationsAEC-Q100 Qualified With the Following ResultsDevice Temperature Grade 1: –40°C to 125°CAmbient Operating TemperatureDevice HBM ESD Classification Level 2Device CDM ESD Classification Level C4BDual H-Bridge Current-Control Motor DriverDrives Two DC MotorsBrake ModeTwo-Bit Winding Current Control Allows Up to4 Current LevelsLow MOSFET On-Resistance1.6-A Maximum Drive Current at 24 V, 25°CBuilt-In 3.3-V Reference OutputIndustry Standard Parallel Digital ControlInterface8-V to 45-V Operating Supply Voltage RangeThermally Enhanced Surface Mount PackageQualified for Automotive ApplicationsAEC-Q100 Qualified With the Following ResultsDevice Temperature Grade 1: –40°C to 125°CAmbient Operating TemperatureDevice HBM ESD Classification Level 2Device CDM ESD Classification Level C4BDual H-Bridge Current-Control Motor DriverDrives Two DC MotorsBrake ModeTwo-Bit Winding Current Control Allows Up to4 Current LevelsLow MOSFET On-Resistance1.6-A Maximum Drive Current at 24 V, 25°CBuilt-In 3.3-V Reference OutputIndustry Standard Parallel Digital ControlInterface8-V to 45-V Operating Supply Voltage RangeThermally Enhanced Surface Mount Package
Description
AI
The DRV8802-Q1 device provides an integrated motor driver solution for automotive applications. The device has two H-bridge drivers, and is intended to drive DC motors. The output driver block for each consists of N-channel power MOSFET’s configured as H-bridges to drive the motor windings. The DRV8802-Q1 device can supply up to 1.6-A peak or 1.1-A RMS output current (with proper heatsinking at 24 V and 25°C) per H-bridge.
A simple parallel digital control interface is compatible with industry-standard devices. Decay mode is programmable to allow braking or coasting of the motor when disabled.
Internal shutdown functions are provided for over current protection, short circuit protection, under voltage lockout and overtemperature.
The DRV8802-Q1 device is available in a 28-pin HTSSOP package with PowerPAD (Eco-friendly: RoHS & no Sb/Br).
The DRV8802-Q1 device provides an integrated motor driver solution for automotive applications. The device has two H-bridge drivers, and is intended to drive DC motors. The output driver block for each consists of N-channel power MOSFET’s configured as H-bridges to drive the motor windings. The DRV8802-Q1 device can supply up to 1.6-A peak or 1.1-A RMS output current (with proper heatsinking at 24 V and 25°C) per H-bridge.
A simple parallel digital control interface is compatible with industry-standard devices. Decay mode is programmable to allow braking or coasting of the motor when disabled.
Internal shutdown functions are provided for over current protection, short circuit protection, under voltage lockout and overtemperature.
The DRV8802-Q1 device is available in a 28-pin HTSSOP package with PowerPAD (Eco-friendly: RoHS & no Sb/Br).