TPL0102 Series
256-tap dual-channel digital potentiometer with I2C interface and nonvolatile memory
Manufacturer: Texas Instruments
Catalog(3 parts)
| Part | Function | Type | Secondary Attributes | Supplied Contents | Utilized IC / Part | Operating Temperature▲▼ | Operating Temperature▲▼ | Temperature Coefficient (Typ)▲▼ | Resistance - Wiper (Ohms) (Typ)▲▼ | Voltage - Supply▲▼ | Voltage - Supply▲▼ | Number of Circuits▲▼ | Mounting Type | Number of Taps▲▼ | Tolerance▲▼ | Tolerance▲▼ | Package / Case | Configuration | Supplier Device Package | Interface | Taper | Features | Memory Type | Resistance (Ohms)▲▼ | Package / Case▲▼ | Package / Case▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Digital Potentiometer | Data Acquisition | I2C Interface(s) | Board(s) | TPL0102 | ||||||||||||||||||||||
Texas Instruments TPL0102-100RUCRDigital Potentiometer 100k Ohm 2 Circuit 256 Taps I2C Interface 14-QFN (2x2) | -40 °C | 85 °C | 0.00009200000204145908 ul | 25 Ω | 2.75 V, 5.5 V | -2.25 V, 2.700000047683716 V | 2 ul | Surface Mount | 256 ul | 0.20000000298023224 ul | -0.20000000298023224 ul | 14-XFQFN | Potentiometer | 14-QFN (2x2) | I2C | Linear | Selectable Address | Non-Volatile | 100000 Ω | |||||||
Texas Instruments TPL0102-100QPWREPDigital Potentiometer 100k Ohm 2 Circuit 256 Taps I2C Interface 14-TSSOP | -40 °C | 125 °C | 0.00009200000204145908 ul | 25 Ω | 2.75 V, 5.5 V | -2.25 V, 2.700000047683716 V | 2 ul | Surface Mount | 256 ul | 0.20000000298023224 ul | -0.20000000298023224 ul | 14-TSSOP | Potentiometer | 14-TSSOP | I2C | Linear | Selectable Address | Non-Volatile | 100000 Ω | 0.004394200164824724 m | 0.004399999976158142 m |
Key Features
• Two Potentiometers with 256-Position ResolutionNon-volatile Memory Stores Wiper Settings100 kΩ End-to-End Resistance (TPL0102-100)Fast Power-up Response Time to Wiper Setting:<100 µs±0.5 LSB INL, ±0.25 LSB DNL (Voltage-DividerMode)4 ppm/°C Ratiometric Temperature CoefficientI2C-compatible Serial Interface2.7 V to 5.5 V Single-Supply Operation±2.25 V to ±2.75 V Dual-Supply OperationOperating Temperature Range from –40°C to85°CShutdown ModeESD Performance Tested Per JESD 222000-V Human Body Model (A114-B, Class II)1000-V Charged-Device Model (C101)APPLICATIONSAdjustable Gain Amplifiers and Offset TrimmingAdjustable Power SuppliesPrecision Calibration of Set Point ThresholdsSensor Trimming and CalibrationMechanical Potentiometer ReplacementAll other trademarks are the property of their respective ownersTwo Potentiometers with 256-Position ResolutionNon-volatile Memory Stores Wiper Settings100 kΩ End-to-End Resistance (TPL0102-100)Fast Power-up Response Time to Wiper Setting:<100 µs±0.5 LSB INL, ±0.25 LSB DNL (Voltage-DividerMode)4 ppm/°C Ratiometric Temperature CoefficientI2C-compatible Serial Interface2.7 V to 5.5 V Single-Supply Operation±2.25 V to ±2.75 V Dual-Supply OperationOperating Temperature Range from –40°C to85°CShutdown ModeESD Performance Tested Per JESD 222000-V Human Body Model (A114-B, Class II)1000-V Charged-Device Model (C101)APPLICATIONSAdjustable Gain Amplifiers and Offset TrimmingAdjustable Power SuppliesPrecision Calibration of Set Point ThresholdsSensor Trimming and CalibrationMechanical Potentiometer ReplacementAll other trademarks are the property of their respective owners
Description
AI
The TPL0102 has two linear-taper digital potentiometers (DPOTs) with 256 wiper positions. Each potentiometer can be used as a three-terminal potentiometer or as a two-terminal rheostat. The TPL0102-100 has an end-to-end resistance of 100 kΩ.
The TPL0102 has non-volatile memory (EEPROM) which can be used to store the wiper position. This is beneficial because the wiper position is stored even during power-off and is automatically reinstated after power-on. The internal registers of the TPL0102 can be accessed using the I2C interface.
The TPL0102 is available in a 14-pin MicroQFN and 14-pin TSSOP package with a specified temperature range of –40°C to 85°C.
The TPL0102 has two linear-taper digital potentiometers (DPOTs) with 256 wiper positions. Each potentiometer can be used as a three-terminal potentiometer or as a two-terminal rheostat. The TPL0102-100 has an end-to-end resistance of 100 kΩ.
The TPL0102 has non-volatile memory (EEPROM) which can be used to store the wiper position. This is beneficial because the wiper position is stored even during power-off and is automatically reinstated after power-on. The internal registers of the TPL0102 can be accessed using the I2C interface.
The TPL0102 is available in a 14-pin MicroQFN and 14-pin TSSOP package with a specified temperature range of –40°C to 85°C.