TLIN1024 Series
Quad LIN Transceiver
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
Quad LIN Transceiver
| Part | Protocol | Qualification | Supplier Device Package | Receiver Hysteresis | Type | Voltage - Supply [Min] | Voltage - Supply [Max] | Grade | Mounting Type | Number of Drivers/Receivers [custom] | Number of Drivers/Receivers [custom] | Operating Temperature [Min] | Operating Temperature [Max] | Data Rate | Package / Case |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TLIN1024RGYTQ1 | LINbus | AEC-Q100 | 24-VQFN (5.5x3.5) | 200 mV | Transceiver | 4 V | 36 VDC | Automotive | Surface Mount | 4 | 4 | -40 °C | 125 °C | 20 kbps | 24-VFQFN Exposed Pad |
Texas Instruments TLIN1024RGYRQ1 | LINbus | AEC-Q100 | 24-VQFN (5.5x3.5) | 200 mV | Transceiver | 4 V | 36 VDC | Automotive | Surface Mount | 4 | 4 | -40 °C | 125 °C | 20 kbps | 24-VFQFN Exposed Pad |
Key Features
• AEC Q100 Qualified for automotive applicationsTemperature: –40 to 125°C ambientHBM Classification level: ±8 kVCDM Classification level: ±1.5 kVCompliant to LIN2.0, LIN2.1, LIN2.2, LIN2.2A and ISO/DIS 17987–4.2 (SeeSLLA492)Conforms to SAE J2602 recommended practice for LIN (SeeSLLA492)Supports 12 V battery applicationsLIN transmit data rate up to 20 kbpsWide operating ranges4 V to 36 V supply voltage±45 V LIN bus fault protectionSleep mode: ultra-low current consumption allows wake up event from:LIN busLocal wake up through ENPower up and down glitch free operationProtection features:Under voltage protection on VSUPTXD Dominant time out protection (DTO)Thermal shutdown protectionUnpowered node or ground disconnection failsafe at system level.3.5 mm × 5.5 mm QFN package with improved automated optical inspection (AOI) capabilityAEC Q100 Qualified for automotive applicationsTemperature: –40 to 125°C ambientHBM Classification level: ±8 kVCDM Classification level: ±1.5 kVCompliant to LIN2.0, LIN2.1, LIN2.2, LIN2.2A and ISO/DIS 17987–4.2 (SeeSLLA492)Conforms to SAE J2602 recommended practice for LIN (SeeSLLA492)Supports 12 V battery applicationsLIN transmit data rate up to 20 kbpsWide operating ranges4 V to 36 V supply voltage±45 V LIN bus fault protectionSleep mode: ultra-low current consumption allows wake up event from:LIN busLocal wake up through ENPower up and down glitch free operationProtection features:Under voltage protection on VSUPTXD Dominant time out protection (DTO)Thermal shutdown protectionUnpowered node or ground disconnection failsafe at system level.3.5 mm × 5.5 mm QFN package with improved automated optical inspection (AOI) capability
Description
AI
The TLIN1024-Q1 device is a quad Local Interconnect Network (LIN) physical layer transceiver, which integrates wake up and protection features, compliant to LIN2.0, LIN2.1, LIN2.2, LIN2.2A and ISO/DIS 17987–4.2 standards. LIN is a single wire bidirectional bus typically used for low speed in-vehicle networks using data rates up to 20 kbps. The LIN receiver supports data rates up to 100 kbps for in-line programming. The TLIN1024-Q1 has two separate dual LIN transceiver blocks. The VSUP1/2control separate dual transceiver blocks. The TLIN1024-Q1 converts the LIN protocol data stream on the TXD input into a LIN bus signal using a current-limited wave-shaping driver which reduces electromagnetic emissions (EME). The receiver converts the data stream to logic level signals that are sent to the microprocessor through the open-drain RXD pin. Ultra-low current consumption is possible using the sleep mode which allows wake up via LIN bus or EN pin. The integrated resistor, electrostatic discharge (ESD) protection, and fault protection allow designers to save board space in their applications.
The TLIN1024-Q1 device is a quad Local Interconnect Network (LIN) physical layer transceiver, which integrates wake up and protection features, compliant to LIN2.0, LIN2.1, LIN2.2, LIN2.2A and ISO/DIS 17987–4.2 standards. LIN is a single wire bidirectional bus typically used for low speed in-vehicle networks using data rates up to 20 kbps. The LIN receiver supports data rates up to 100 kbps for in-line programming. The TLIN1024-Q1 has two separate dual LIN transceiver blocks. The VSUP1/2control separate dual transceiver blocks. The TLIN1024-Q1 converts the LIN protocol data stream on the TXD input into a LIN bus signal using a current-limited wave-shaping driver which reduces electromagnetic emissions (EME). The receiver converts the data stream to logic level signals that are sent to the microprocessor through the open-drain RXD pin. Ultra-low current consumption is possible using the sleep mode which allows wake up via LIN bus or EN pin. The integrated resistor, electrostatic discharge (ESD) protection, and fault protection allow designers to save board space in their applications.