TPS22975 Series
5.7-V, 6-A, 16-mΩ load switch with adj. rise time, optional output discharge, and thermal shutdown
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
5.7-V, 6-A, 16-mΩ load switch with adj. rise time, optional output discharge, and thermal shutdown
| Part | Mounting Type | Voltage - Supply (Vcc/Vdd) | Output Configuration | Features | Ratio - Input:Output [custom] | Fault Protection | Supplier Device Package | Current - Output (Max) [Max] | Input Type | Rds On (Typ) [custom] | Number of Outputs | Interface | Package / Case | Output Type | Switch Type | Operating Temperature [Max] | Operating Temperature [Min] | Voltage - Load [Max] | Voltage - Load [Min] | Type | Utilized IC / Part | Function | Supplied Contents |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS22975NDSGT | Surface Mount | Not Required | High Side | Slew Rate Controlled | 1:1 | Over Temperature | 8-WSON (2x2) | 6 A | Non-Inverting | 16 mOhm | 1 | On/Off | 8-WFDFN Exposed Pad | N-Channel | General Purpose | 105 °C | -40 °C | 5.7 V | 2.5 V | ||||
Texas Instruments TPS22975NDSGR | Surface Mount | Not Required | High Side | Slew Rate Controlled | 1:1 | Over Temperature | 8-WSON (2x2) | 6 A | Non-Inverting | 16 mOhm | 1 | On/Off | 8-WFDFN Exposed Pad | N-Channel | General Purpose | 105 °C | -40 °C | 5.7 V | 2.5 V | ||||
Texas Instruments TPS22975DSGR | Surface Mount | Not Required | High Side | Load Discharge, Slew Rate Controlled | 1:1 | Over Temperature | 8-WSON (2x2) | 6 A | Non-Inverting | 16 mOhm | 1 | On/Off | 8-WFDFN Exposed Pad | N-Channel | General Purpose | 105 °C | -40 °C | 5.7 V | 2.5 V | ||||
Texas Instruments TPS22975EVM | Power Management | TPS22975 | Power Distribution Switch (Load Switch) | Board(s) | |||||||||||||||||||
Texas Instruments TPS22975DSGT | Surface Mount | Not Required | High Side | Load Discharge, Slew Rate Controlled | 1:1 | Over Temperature | 8-WSON (2x2) | 6 A | Non-Inverting | 16 mOhm | 1 | On/Off | 8-WFDFN Exposed Pad | N-Channel | General Purpose | 105 °C | -40 °C | 5.7 V | 2.5 V |
Key Features
• Integrated Single-Channel Load SwitchInput Voltage Range: 0.6 V to VBIASVBIASVoltage Range: 2.5 V to 5.7 VOn-Resistance (RON)RON= 16 mΩ (typical) at VIN = 0.6 V to 5.7 V,VBIAS= 5.7 V6-A Maximum Continuous Switch CurrentLow Quiescent Current37 µA (typical) at VIN= VBIAS= 5 VLow-Control Input-Threshold Enables Use of1.2-, 1.8-, 2.5-, and 3.3-V LogicConfigurable Rise TimeThermal ShutdownQuick-Output Discharge (QOD) (Optional)SON 8-pin Package with Thermal PadESD Performance Tested per JESD 222000-V HBM and 1000-V CDMIntegrated Single-Channel Load SwitchInput Voltage Range: 0.6 V to VBIASVBIASVoltage Range: 2.5 V to 5.7 VOn-Resistance (RON)RON= 16 mΩ (typical) at VIN = 0.6 V to 5.7 V,VBIAS= 5.7 V6-A Maximum Continuous Switch CurrentLow Quiescent Current37 µA (typical) at VIN= VBIAS= 5 VLow-Control Input-Threshold Enables Use of1.2-, 1.8-, 2.5-, and 3.3-V LogicConfigurable Rise TimeThermal ShutdownQuick-Output Discharge (QOD) (Optional)SON 8-pin Package with Thermal PadESD Performance Tested per JESD 222000-V HBM and 1000-V CDM
Description
AI
The TPS22975 product family consists of two devices: TPS22975 and TPS22975N. Each device is a single-channel load switch that provides a configurable rise time to minimize inrush current. The device contains an N-channel MOSFET that can operate over an input voltage range of 0.6 V to 5.7 V and can support a maximum continuous current of 6 A. The switch is controlled by an on and off input (ON), which is capable of interfacing directly with low-voltage control signals. TPS22975 has an optional 230-Ω on-chip load resistor for quick output discharge when switch is turned off.
The TPS22975 is available in a small, space-saving 2-mm × 2-mm 8-pin SON package (DSG) with integrated thermal pad allowing for high power dissipation. The device is characterized for operation over the free-air temperature range of –40°C to +105°C.
The TPS22975 product family consists of two devices: TPS22975 and TPS22975N. Each device is a single-channel load switch that provides a configurable rise time to minimize inrush current. The device contains an N-channel MOSFET that can operate over an input voltage range of 0.6 V to 5.7 V and can support a maximum continuous current of 6 A. The switch is controlled by an on and off input (ON), which is capable of interfacing directly with low-voltage control signals. TPS22975 has an optional 230-Ω on-chip load resistor for quick output discharge when switch is turned off.
The TPS22975 is available in a small, space-saving 2-mm × 2-mm 8-pin SON package (DSG) with integrated thermal pad allowing for high power dissipation. The device is characterized for operation over the free-air temperature range of –40°C to +105°C.