CC2652RB Series

SimpleLink™ 32-bit Arm Cortex-M4F multiprotocol 2.4 GHz wireless MCU with crystal-less BAW resonator

Catalog

SimpleLink™ 32-bit Arm Cortex-M4F multiprotocol 2.4 GHz wireless MCU with crystal-less BAW resonator

Part	Power - Output	Frequency [Min]	Frequency [Max]	GPIO	Operating Temperature [Max]	Operating Temperature [Min]	Sensitivity	RF Family/Standard	Package / Case	Serial Interfaces	Current - Transmitting [Min]	Current - Transmitting [Max]	Protocol	Voltage - Supply [Min]	Voltage - Supply [Max]	Mounting Type	Supplier Device Package	Data Rate (Max)	Current - Receiving	Memory Size [custom]	Memory Size [custom]	Type
Texas Instruments CC2652RB1FRGZR	5 dBm	2.4 GHz	2.48 GHz	31	85 °C	-40 °C	-102 dBm	802.15.4, Bluetooth	48-VFQFN Exposed Pad	ADC, GPIO, I2C, I2S, JTAG, SPI, UART	7.9 mA	10.2 mA	Bluetooth v5.0, Thread, Zigbee®	1.8 V	3.8 V	Surface Mount	48-VQFN (7x7)	2 Mbps	7.3 mA	80 kB	352 kB	TxRx + MCU

Catalog

SimpleLink™ 32-bit Arm Cortex-M4F multiprotocol 2.4 GHz wireless MCU with crystal-less BAW resonator

Key Features

• MicrocontrollerPowerful 48-MHz Arm Cortex-M4F processorEEMBC CoreMark score: 148352KB of in-system programmable flash256KB of ROM for protocols and library functions8KB of cache SRAM (alternatively available as general-purpose RAM)80KB of ultra-low leakage SRAM. The SRAM is protected by parity to ensure high reliability of operation.2-pin cJTAG and JTAG debuggingSupports over-the-air (OTA) updateUltra-low power sensor controller with 4KB of SRAMSample, store, and process sensor dataOperation independent from system CPUFast wake-up for low-power operationTI-RTOS, drivers, bootloader,Bluetooth5.2 low energy controller, and IEEE 802.15.4 MAC in ROM for optimized application sizeRoHS-compliant package7-mm × 7-mm RGZ VQFN48 (31 GPIOs)PeripheralsDigital peripherals can be routed to any GPIO4× 32-bit or 8× 16-bit general-purpose timers12-bit ADC, 200 kSamples/s, 8 channels2× comparators with internal reference DAC (1× continuous time, 1× ultra-low power)Programmable current source2× UART2× SSI (SPI, MICROWIRE, TI)I2C and I2SReal-time clock (RTC)AES 128- and 256-bit cryptographic acceleratorECC and RSA public key hardware acceleratorSHA2 accelerator (full suite up to SHA-512)True random number generator (TRNG)Capacitive sensing, up to 8 channelsIntegrated temperature and battery monitorExternal systemIntegrated bulk acoustic wave (BAW) resonator generating accurate clock with fast startup time of 80 µs for system and RFOn-chip buck DC/DC converterLow powerWide supply voltage rangeNormal operation: 1.8 to 3.8 VExternal regulator mode: 1.7 to 1.95 VActive mode RX: 7.3 mAActive mode TX 0 dBm: 7.9 mAActive mode TX 5 dBm: 10.2 mAActive mode MCU 48 MHz (CoreMark): 3.4 mA (71 µA/MHz)Sensor controller, low power-mode, 2 MHz, running infinite loop: 30.8 µASensor controller, active mode, 24 MHz, running infinite loop: 808 µAStandby: 0.94 µA (RTC on, 80KB RAM and CPU retention)Radio section2.4 GHz RF transceiver compatible with Bluetooth 5.2 Low Energy and earlier LE specifications and IEEE 802.15.4 PHY and MAC3-wire, 2-wire, 1-wire PTA coexistence mechanismsExcellent receiver sensitivity: -100 dBm for 802.15.4 (2.4 GHz), -102 dBm for Bluetooth 5 Low Energy CodedProgrammable output power up to +5 dBmSuitable for systems targeting compliance with worldwide radio frequency regulationsEN 300 328, (Europe)EN 300 440 Category 2FCC CFR47 Part 15ARIB STD-T66 (Japan)Wireless protocolsThread,Zigbee,Bluetooth5.2 Low Energy, IEEE 802.15.4, IPv6-enabled smart objects (6LoWPAN), proprietary systems, SimpleLink™ TI 15.4 stack (2.4 GHz), and dynamic multiprotocol manager (DMM) driver.DevelopmentTools and SoftwareCC2652RB LaunchPad™ Development KitSimpleLink™ CC13x2 and CC26x2 Software Development KitSmartRF™ Studiofor simple radio configurationSensor Controller Studiofor building low-power sensing applicationsMicrocontrollerPowerful 48-MHz Arm Cortex-M4F processorEEMBC CoreMark score: 148352KB of in-system programmable flash256KB of ROM for protocols and library functions8KB of cache SRAM (alternatively available as general-purpose RAM)80KB of ultra-low leakage SRAM. The SRAM is protected by parity to ensure high reliability of operation.2-pin cJTAG and JTAG debuggingSupports over-the-air (OTA) updateUltra-low power sensor controller with 4KB of SRAMSample, store, and process sensor dataOperation independent from system CPUFast wake-up for low-power operationTI-RTOS, drivers, bootloader,Bluetooth5.2 low energy controller, and IEEE 802.15.4 MAC in ROM for optimized application sizeRoHS-compliant package7-mm × 7-mm RGZ VQFN48 (31 GPIOs)PeripheralsDigital peripherals can be routed to any GPIO4× 32-bit or 8× 16-bit general-purpose timers12-bit ADC, 200 kSamples/s, 8 channels2× comparators with internal reference DAC (1× continuous time, 1× ultra-low power)Programmable current source2× UART2× SSI (SPI, MICROWIRE, TI)I2C and I2SReal-time clock (RTC)AES 128- and 256-bit cryptographic acceleratorECC and RSA public key hardware acceleratorSHA2 accelerator (full suite up to SHA-512)True random number generator (TRNG)Capacitive sensing, up to 8 channelsIntegrated temperature and battery monitorExternal systemIntegrated bulk acoustic wave (BAW) resonator generating accurate clock with fast startup time of 80 µs for system and RFOn-chip buck DC/DC converterLow powerWide supply voltage rangeNormal operation: 1.8 to 3.8 VExternal regulator mode: 1.7 to 1.95 VActive mode RX: 7.3 mAActive mode TX 0 dBm: 7.9 mAActive mode TX 5 dBm: 10.2 mAActive mode MCU 48 MHz (CoreMark): 3.4 mA (71 µA/MHz)Sensor controller, low power-mode, 2 MHz, running infinite loop: 30.8 µASensor controller, active mode, 24 MHz, running infinite loop: 808 µAStandby: 0.94 µA (RTC on, 80KB RAM and CPU retention)Radio section2.4 GHz RF transceiver compatible with Bluetooth 5.2 Low Energy and earlier LE specifications and IEEE 802.15.4 PHY and MAC3-wire, 2-wire, 1-wire PTA coexistence mechanismsExcellent receiver sensitivity: -100 dBm for 802.15.4 (2.4 GHz), -102 dBm for Bluetooth 5 Low Energy CodedProgrammable output power up to +5 dBmSuitable for systems targeting compliance with worldwide radio frequency regulationsEN 300 328, (Europe)EN 300 440 Category 2FCC CFR47 Part 15ARIB STD-T66 (Japan)Wireless protocolsThread,Zigbee,Bluetooth5.2 Low Energy, IEEE 802.15.4, IPv6-enabled smart objects (6LoWPAN), proprietary systems, SimpleLink™ TI 15.4 stack (2.4 GHz), and dynamic multiprotocol manager (DMM) driver.DevelopmentTools and SoftwareCC2652RB LaunchPad™ Development KitSimpleLink™ CC13x2 and CC26x2 Software Development KitSmartRF™ Studiofor simple radio configurationSensor Controller Studiofor building low-power sensing applications

Description

The SimpleLink™CC2652RB device is the industry’s first multiprotocol 2.4 GHz wireless crystal-less microcontroller (MCU) with integrated TI Bulk Acoustic Wave (BAW) resonator technology supportingThread,Zigbee,Bluetooth5.2 Low Energy, IEEE 802.15.4, IPv6-enabled smart objects (6LoWPAN), proprietary systems, including the TI 15.4-Stack (2.4 GHz), andconcurrent multiprotocoloperation through the Dynamic Multiprotocol Manager (DMM) software driver. Integrated BAW resonator technologyeliminates the need for external crystalswithout compromising latency or frequency stability. The device is optimized for low-power wireless communication and advanced sensing inbuilding security systems,HVAC,medical,power tool,wired networking,portable electronics,home theater & entertainment, andconnected peripheralsmarkets. The highlighted features of TI Bulk Acoustic Wave (BAW) resonator technology include: The highlighted features of theSimpleLink™ MCU platforminclude: The CC2652RB device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi,BluetoothLow Energy, Thread, Zigbee, Sub-1 GHz MCUs, and host MCUs that all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink™ platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visitSimpleLink™ MCU platform. The SimpleLink™CC2652RB device is the industry’s first multiprotocol 2.4 GHz wireless crystal-less microcontroller (MCU) with integrated TI Bulk Acoustic Wave (BAW) resonator technology supportingThread,Zigbee,Bluetooth5.2 Low Energy, IEEE 802.15.4, IPv6-enabled smart objects (6LoWPAN), proprietary systems, including the TI 15.4-Stack (2.4 GHz), andconcurrent multiprotocoloperation through the Dynamic Multiprotocol Manager (DMM) software driver. Integrated BAW resonator technologyeliminates the need for external crystalswithout compromising latency or frequency stability. The device is optimized for low-power wireless communication and advanced sensing inbuilding security systems,HVAC,medical,power tool,wired networking,portable electronics,home theater & entertainment, andconnected peripheralsmarkets. The highlighted features of TI Bulk Acoustic Wave (BAW) resonator technology include: The highlighted features of theSimpleLink™ MCU platforminclude: The CC2652RB device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi,BluetoothLow Energy, Thread, Zigbee, Sub-1 GHz MCUs, and host MCUs that all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink™ platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visitSimpleLink™ MCU platform.