WL1835MOD Series
WiLink™ 8 single band combo 2x2 MIMO Wi-Fi®, Bluetooth® & Bluetooth Smart module
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
WiLink™ 8 single band combo 2x2 MIMO Wi-Fi®, Bluetooth® & Bluetooth Smart module
| Part | RF Family/Standard | Package / Case | Voltage - Supply [Min] | Voltage - Supply [Max] | Data Rate | Frequency | Protocol | Current - Receiving [Max] | Current - Receiving [Min] | Power - Output | Mounting Type | Current - Transmitting [Min] | Current - Transmitting [Max] | Serial Interfaces | Sensitivity | Modulation | Operating Temperature [Max] | Operating Temperature [Min] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments WL1835MODGBMOCR | Bluetooth, WiFi | Module | 2.9 V | 4.8 V | 54 Mbps | 2.4 GHz | 802.11b/g/n, Bluetooth 4.2 | 85 mA | 49 mA | 17.3 dBm | Surface Mount | 238 mA | 420 mA | SDIO, UART | -96.3 dBm | CCK, DSSS, GFSK, OFDM | 70 ░C | -20 ░C |
Texas Instruments WL1835MODGBMOCT | Bluetooth, WiFi | Module | 2.9 V | 4.8 V | 54 Mbps | 2.4 GHz | 802.11b/g/n, Bluetooth 4.2 | 85 mA | 49 mA | 17.3 dBm | Surface Mount | 238 mA | 420 mA | SDIO, UART | -96.3 dBm | CCK, DSSS, GFSK, OFDM | 70 ░C | -20 ░C |
Key Features
• GeneralIntegrates RF, power amplifiers (PAs), clock, RF switches, filters, passives, and power managementQuick hardware design with TI module collateral and reference designsOperating temperature: –20°C to +70°CSmall form factor: 13.3 × 13.4 × 2 mm100-pin MOC packageFCC, IC, ETSI/CE, and TELEC certified with PCB, dipole, chip, and PIFA antennasWi-FiWLAN baseband processor and RF transceiver support of IEEE Std 802.11b, 802.11g, and 802.11n20- and 40-MHz SISO and 20-MHz 2 × 2 MIMO at 2.4 GHz for high throughput: 80 Mbps (TCP), 100 Mbps (UDP)2.4-GHz MRC support for extended rangeFully calibrated: production calibration not required4-bit SDIO host interface supportWi-Fi direct concurrent operation (multichannel, multirole)Bluetooth and Bluetooth low energy (WL183xMOD only)Bluetooth 5.1 secure connection compliant and CSA2 support (declaration ID: D032799)Host controller interface (HCI) transport for Bluetooth over UARTDedicated audio processor support of SBC encoding + A2DPDual-mode Bluetooth and Bluetooth low energyTI’s Bluetooth and Bluetooth low energy certified stackKey benefitsReduces design overheadDifferentiated use cases by configuring WiLink™ 8 simultaneously in two roles (STA and AP) to connect directly with other Wi-Fi devices on different RF channel (Wi-Fi networks)Best-in-class Wi-Fi with high-performance audio and video streaming reference applications with up to 1.4× the range versus one antennaDifferent provisioning methods for in-home devices connectivity to Wi-Fi in one stepLowest Wi-Fi power consumption in connected idle (< 800 µA)Configurable wake on WLAN filters to only wake up the systemWi-Fi and Bluetooth single antenna coexistenceGeneralIntegrates RF, power amplifiers (PAs), clock, RF switches, filters, passives, and power managementQuick hardware design with TI module collateral and reference designsOperating temperature: –20°C to +70°CSmall form factor: 13.3 × 13.4 × 2 mm100-pin MOC packageFCC, IC, ETSI/CE, and TELEC certified with PCB, dipole, chip, and PIFA antennasWi-FiWLAN baseband processor and RF transceiver support of IEEE Std 802.11b, 802.11g, and 802.11n20- and 40-MHz SISO and 20-MHz 2 × 2 MIMO at 2.4 GHz for high throughput: 80 Mbps (TCP), 100 Mbps (UDP)2.4-GHz MRC support for extended rangeFully calibrated: production calibration not required4-bit SDIO host interface supportWi-Fi direct concurrent operation (multichannel, multirole)Bluetooth and Bluetooth low energy (WL183xMOD only)Bluetooth 5.1 secure connection compliant and CSA2 support (declaration ID: D032799)Host controller interface (HCI) transport for Bluetooth over UARTDedicated audio processor support of SBC encoding + A2DPDual-mode Bluetooth and Bluetooth low energyTI’s Bluetooth and Bluetooth low energy certified stackKey benefitsReduces design overheadDifferentiated use cases by configuring WiLink™ 8 simultaneously in two roles (STA and AP) to connect directly with other Wi-Fi devices on different RF channel (Wi-Fi networks)Best-in-class Wi-Fi with high-performance audio and video streaming reference applications with up to 1.4× the range versus one antennaDifferent provisioning methods for in-home devices connectivity to Wi-Fi in one stepLowest Wi-Fi power consumption in connected idle (< 800 µA)Configurable wake on WLAN filters to only wake up the systemWi-Fi and Bluetooth single antenna coexistence
Description
AI
The certified WiLink™ 8 module from TI offers high throughput and extended range along with Wi-Fi®andBluetooth®coexistence (WL1835MOD only) in a power-optimized design. The WL18x5MOD device is a 2.4-GHz module, two antenna solution. The device is FCC, IC, ETSI/CE, and TELEC certified for AP and client. TI offers drivers for high-level operating systems such as Linux and Android™. Additional drivers, such as WinCE and RTOS, which includes QNX, Nucleus, ThreadX, and FreeRTOS, are supported through third parties.
The certified WiLink™ 8 module from TI offers high throughput and extended range along with Wi-Fi®andBluetooth®coexistence (WL1835MOD only) in a power-optimized design. The WL18x5MOD device is a 2.4-GHz module, two antenna solution. The device is FCC, IC, ETSI/CE, and TELEC certified for AP and client. TI offers drivers for high-level operating systems such as Linux and Android™. Additional drivers, such as WinCE and RTOS, which includes QNX, Nucleus, ThreadX, and FreeRTOS, are supported through third parties.