74FCT245 Series

BiCMOS FCT Interface Logic Octal Non-Inverting Bus Transceivers with 3-State Outputs

Catalog

BiCMOS FCT Interface Logic Octal Non-Inverting Bus Transceivers with 3-State Outputs

Part	Current - Output High	Current - Output Low	Output Type	Package Length	Package Name	Package Width	Logic Type	Number of Bits per Element	Mounting Type	Voltage - Supply (Maximum)	Voltage - Supply (Minimum)	Operating Temperature (Max)	Operating Temperature (Min)	Number of Elements
Texas Instruments CY74FCT245CTSOC	32 mA	64 mA	3-State	0.295 in	20-SOIC	7.5 mm	Non-Inverting Transceiver	8 bits	Surface Mount	5.25 V	4.75 V	85 °C	-40 °C	1
Texas Instruments CD74FCT245M96	15 mA	64 mA	3-State	0.295 in	20-SOIC	7.5 mm	Non-Inverting Transceiver	8 bits	Surface Mount	5.25 V	4.75 V	70 °C	0 °C	1
Texas Instruments CY74FCT245TSOCT	32 mA	64 mA	3-State	0.295 in	20-SOIC	7.5 mm	Non-Inverting Transceiver	8 bits	Surface Mount	5.25 V	4.75 V	85 °C	-40 °C	1
Texas Instruments CY74FCT245ATPCG4	32 mA	64 mA	3-State	0.3 in	20-DIP 20-PDIP	7.62 mm	Non-Inverting Transceiver	8 bits	Through Hole	5.25 V	4.75 V	85 °C	-40 °C	1
Texas Instruments 74FCT245SCX
Texas Instruments CY74FCT245TSOCG4	32 mA	64 mA	3-State	0.295 in	20-SOIC	7.5 mm	Non-Inverting Transceiver	8 bits	Surface Mount	5.25 V	4.75 V	85 °C	-40 °C	1
Texas Instruments CY74FCT245ATSOC	32 mA	64 mA	3-State	0.295 in	20-SOIC	7.5 mm	Non-Inverting Transceiver	8 bits	Surface Mount	5.25 V	4.75 V	85 °C	-40 °C	1
Texas Instruments CD74FCT245E	15 mA	64 mA	3-State	0.3 in	20-DIP 20-PDIP	7.62 mm	Non-Inverting Transceiver	8 bits	Through Hole	5.25 V	4.75 V	70 °C	0 °C	1
Texas Instruments CY74FCT245CTQC	32 mA	64 mA	3-State	0.154 in	20-SSOP	3.9 mm	Non-Inverting Transceiver	8 bits	Surface Mount	5.25 V	4.75 V	85 °C	-40 °C	1
Texas Instruments CY74FCT245CTSOCT	32 mA	64 mA	3-State	0.295 in	20-SOIC	7.5 mm	Non-Inverting Transceiver	8 bits	Surface Mount	5.25 V	4.75 V	85 °C	-40 °C	1

Catalog

BiCMOS FCT Interface Logic Octal Non-Inverting Bus Transceivers with 3-State Outputs

Description

The CD74FCT245 is an octal bus transceiver with 3-state outputs using a small-geometry BiCMOS technology. The output stages are a combination of bipolar and CMOS transistors that limit the output high level to two diode drops below VCC. This resultant lowering of output swing (0 V to 3.7 V) reduces the power-bus ringing [a source of electromagnetic interference (EMI)] and minimizes VCCbounce and ground bounce and their effects during simultaneous output switching. The output configuration also enhances switching speed and is capable of sinking 64 mA. The CD74FCT245 allows data transmission from the A bus to the B bus or from the B bus to the A bus, depending upon the logic level at the direction-control (DIR) input. The output-enable (OE\) input can be used to disable the device so that the buses are effectively isolated. To ensure the high-impedance state during power up or power down, OE\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. The CD74FCT245 is characterized for operation from 0°C to 70°C. The CD74FCT245 is an octal bus transceiver with 3-state outputs using a small-geometry BiCMOS technology. The output stages are a combination of bipolar and CMOS transistors that limit the output high level to two diode drops below VCC. This resultant lowering of output swing (0 V to 3.7 V) reduces the power-bus ringing [a source of electromagnetic interference (EMI)] and minimizes VCCbounce and ground bounce and their effects during simultaneous output switching. The output configuration also enhances switching speed and is capable of sinking 64 mA. The CD74FCT245 allows data transmission from the A bus to the B bus or from the B bus to the A bus, depending upon the logic level at the direction-control (DIR) input. The output-enable (OE\) input can be used to disable the device so that the buses are effectively isolated. To ensure the high-impedance state during power up or power down, OE\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. The CD74FCT245 is characterized for operation from 0°C to 70°C.