Technical Specifications
Parameters and characteristics commom to parts in this series
| Specification | MAX208CDBRG4 | MAX208 Series |
|---|---|---|
| Data Rate | 120 Kbps | 120 Kbps |
| Duplex | Full | Full |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Drivers/Receivers [custom] | 4 | 4 |
| Number of Drivers/Receivers [custom] | 4 | 4 |
| Operating Temperature [Max] | 70 ░C | 70 - 85 ░C |
| Operating Temperature [Min] | 0 °C | -40 - 0 °C |
| Package / Case | 0.209 in | 0.209 in |
| Package / Case | 5.3 mm | 5.3 mm |
| Package / Case | 24-SSOP | 24-SSOP, 24-SOIC |
| Package / Case | - | 7.5 mm |
| Package / Case | - | 0.295 in |
| Protocol | RS232 | RS232 |
| Receiver Hysteresis | 500 mV | 500 mV |
| Supplier Device Package | 24-SSOP | 24-SSOP, 24-SOIC |
| Type | Transceiver | Transceiver |
| Voltage - Supply [Max] | 5.5 V | 5.5 V |
| Voltage - Supply [Min] | 4.5 V | 4.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
MAX208 Series
5-V quad channel 120kbps RS-232 line driver/receiver with +/-9V output & +/-15-kV ESD protection
| Part | Protocol | Type | Number of Drivers/Receivers [custom] | Number of Drivers/Receivers [custom] | Operating Temperature [Max] | Operating Temperature [Min] | Duplex | Supplier Device Package | Package / Case | Package / Case | Package / Case | Voltage - Supply [Max] | Voltage - Supply [Min] | Data Rate | Receiver Hysteresis | Mounting Type | Package / Case [y] | Package / Case [x] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
RS232 | Transceiver | 4 | 4 | 70 ░C | 0 °C | Full | 24-SSOP | 0.209 in | 5.3 mm | 24-SSOP | 5.5 V | 4.5 V | 120 Kbps | 500 mV | Surface Mount | |||
RS232 | Transceiver | 4 | 4 | 85 °C | -40 °C | Full | 24-SSOP | 0.209 in | 5.3 mm | 24-SSOP | 5.5 V | 4.5 V | 120 Kbps | 500 mV | Surface Mount | |||
Texas Instruments MAX208IDWThe MAX208 device consists of four line drivers, four line receivers, and a dual charge-pump circuit with ±15-kV HBM ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate.
The MAX208 device consists of four line drivers, four line receivers, and a dual charge-pump circuit with ±15-kV HBM ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate. | RS232 | Transceiver | 4 | 4 | 85 °C | -40 °C | Full | 24-SOIC | 24-SOIC | 5.5 V | 4.5 V | 120 Kbps | 500 mV | Surface Mount | 7.5 mm | 0.295 in | ||
Texas Instruments MAX208CDWRThe MAX208 device consists of four line drivers, four line receivers, and a dual charge-pump circuit with ±15-kV HBM ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate.
The MAX208 device consists of four line drivers, four line receivers, and a dual charge-pump circuit with ±15-kV HBM ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate. | RS232 | Transceiver | 4 | 4 | 70 ░C | 0 °C | Full | 24-SOIC | 24-SOIC | 5.5 V | 4.5 V | 120 Kbps | 500 mV | Surface Mount | 7.5 mm | 0.295 in | ||
RS232 | Transceiver | 4 | 4 | 70 ░C | 0 °C | Full | 24-SSOP | 0.209 in | 5.3 mm | 24-SSOP | 5.5 V | 4.5 V | 120 Kbps | 500 mV | Surface Mount | |||
Texas Instruments MAX208CDBRThe MAX208 device consists of four line drivers, four line receivers, and a dual charge-pump circuit with ±15-kV HBM ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate.
The MAX208 device consists of four line drivers, four line receivers, and a dual charge-pump circuit with ±15-kV HBM ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate. | RS232 | Transceiver | 4 | 4 | 70 ░C | 0 °C | Full | 24-SSOP | 0.209 in | 5.3 mm | 24-SSOP | 5.5 V | 4.5 V | 120 Kbps | 500 mV | Surface Mount | ||
Texas Instruments MAX208IDWRThe MAX208 device consists of four line drivers, four line receivers, and a dual charge-pump circuit with ±15-kV HBM ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate.
The MAX208 device consists of four line drivers, four line receivers, and a dual charge-pump circuit with ±15-kV HBM ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate. | RS232 | Transceiver | 4 | 4 | 85 °C | -40 °C | Full | 24-SOIC | 24-SOIC | 5.5 V | 4.5 V | 120 Kbps | 500 mV | Surface Mount | 7.5 mm | 0.295 in | ||
RS232 | Transceiver | 4 | 4 | 85 °C | -40 °C | Full | 24-SSOP | 0.209 in | 5.3 mm | 24-SSOP | 5.5 V | 4.5 V | 120 Kbps | 500 mV | Surface Mount | |||
RS232 | Transceiver | 4 | 4 | 85 °C | -40 °C | Full | 24-SOIC | 24-SOIC | 5.5 V | 4.5 V | 120 Kbps | 500 mV | Surface Mount | 7.5 mm | 0.295 in | |||
Texas Instruments MAX208IDBRThe MAX208 device consists of four line drivers, four line receivers, and a dual charge-pump circuit with ±15-kV HBM ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate.
The MAX208 device consists of four line drivers, four line receivers, and a dual charge-pump circuit with ±15-kV HBM ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate. | RS232 | Transceiver | 4 | 4 | 85 °C | -40 °C | Full | 24-SSOP | 0.209 in | 5.3 mm | 24-SSOP | 5.5 V | 4.5 V | 120 Kbps | 500 mV | Surface Mount | ||
RS232 | Transceiver | 4 | 4 | 70 ░C | 0 °C | Full | 24-SSOP | 0.209 in | 5.3 mm | 24-SSOP | 5.5 V | 4.5 V | 120 Kbps | 500 mV | Surface Mount | |||
RS232 | Transceiver | 4 | 4 | 85 °C | -40 °C | Full | 24-SOIC | 24-SOIC | 5.5 V | 4.5 V | 120 Kbps | 500 mV | Surface Mount | 7.5 mm | 0.295 in |
Description
General part information
MAX208 Series
The MAX208 device consists of four line drivers, four line receivers, and a dual charge-pump circuit with ±15-kV HBM ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate.
The MAX208 device consists of four line drivers, four line receivers, and a dual charge-pump circuit with ±15-kV HBM ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate.