Technical Specifications
Parameters and characteristics for this part
| Specification | M24M01-RDW6TP |
|---|---|
| Access Time | 500 ns |
| Memory Format | EEPROM |
| Memory Interface | I2C |
| Memory Organization | 128K x 8 |
| Memory Size | 1 Mbit |
| Memory Type | Non-Volatile |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 8-TSSOP |
| Package / Case [custom] | 0.173 " |
| Package / Case [custom] | 4.4 mm |
| Supplier Device Package | 8-TSSOP |
| Technology | EEPROM |
| Voltage - Supply [Max] | 5.5 V |
| Voltage - Supply [Min] | 1.8 V |
| Write Cycle Time - Word, Page | 5 ms |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.48 | |
| 10 | $ 1.35 | |||
| 25 | $ 1.31 | |||
| 50 | $ 1.31 | |||
| 100 | $ 1.17 | |||
| 250 | $ 1.17 | |||
| 500 | $ 1.15 | |||
| 1000 | $ 1.10 | |||
| Digi-Reel® | 1 | $ 1.48 | ||
| 10 | $ 1.35 | |||
| 25 | $ 1.31 | |||
| 50 | $ 1.31 | |||
| 100 | $ 1.17 | |||
| 250 | $ 1.17 | |||
| 500 | $ 1.15 | |||
| 1000 | $ 1.10 | |||
| Tape & Reel (TR) | 4000 | $ 1.03 | ||
| 8000 | $ 1.02 | |||
| Newark | Each (Supplied on Cut Tape) | 1 | $ 1.64 | |
| 10 | $ 1.56 | |||
| 25 | $ 1.52 | |||
| 50 | $ 1.49 | |||
| 100 | $ 1.47 | |||
| 250 | $ 1.43 | |||
| 500 | $ 1.41 | |||
| 1000 | $ 1.38 | |||
Description
General part information
M24M01-A125 Series
The M24M01E-F is a 1-Mbit I²C-compatible EEPROM (electrically erasable programmable memory) organized as 128 K × 8 bits. It can operate with a supply voltage from 1.6 V to 5.5 V with a clock frequency up to 1 MHz, over an ambient temperature range of -40 °C to +85 °C.
The device offers three 8-bit registers, namely: the device type identifier (DTI) register, the configurable device address (CDA), and the software write protection (SWP) register.
The device offers an additional 256-byte page, called the identification page. This page can be used to store sensitive application parameters, which can later be permanently locked in read-only mode.
Documents
Technical documentation and resources