Zenode.ai Logo
TPS60300DGSRG4 - 10-VSSOP

TPS60300DGSRG4

Active
Texas Instruments

IC REG CHARGE PUMP 2VIN 10VSSOP

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsDatasheet
TPS60300DGSRG4 - 10-VSSOP

TPS60300DGSRG4

Active
Texas Instruments

IC REG CHARGE PUMP 2VIN 10VSSOP

Deep-Dive with AI

DocumentsDatasheet

Technical Specifications

Parameters and characteristics commom to parts in this series

SpecificationTPS60300DGSRG4TPS60300 Series
Current - Output20 mA, 40 mA20 - 40 mA
Frequency - Switching700 kHz700 kHz
FunctionRatiometric, Step-UpRatiometric, Step-Up
Mounting TypeSurface MountSurface Mount
Number of Outputs [custom]22
Operating Temperature [Max]125 ¯C125 ¯C
Operating Temperature [Min]-40 °C-40 °C
Output ConfigurationPositivePositive
Output Type27.03 °C/W27.03 °C/W
Package / Case10-TFSOP, 10-MSOP10-TFSOP, 10-MSOP
Supplier Device Package10-VSSOP10-VSSOP
Synchronous RectifierFalseFalse
Voltage - Input (Max) [Max]1.8 V1.8 V
Voltage - Input (Min) [Min]0.9 V0.9 V
Voltage - Output (Min/Fixed)3.3 V3.3 V
Voltage - Output (Min/Fixed) [Min]2Vin2Vin

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

TPS60300 Series

IC REG CHARGE PUMP 2VIN 10VSSOP

PartVoltage - Output (Min/Fixed) [Min]Voltage - Output (Min/Fixed)Voltage - Input (Max) [Max]FunctionSynchronous RectifierOperating Temperature [Max]Operating Temperature [Min]Current - OutputFrequency - SwitchingPackage / CaseMounting TypeSupplier Device PackageNumber of Outputs [custom]Output ConfigurationVoltage - Input (Min) [Min]Output Type
Texas Instruments
TPS60300DGSRG4
Charge Pump Switching Regulator IC Positive Fixed 2Vin, 3.3V 2 Output 40mA, 20mA 10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
2Vin
3.3 V
1.8 V
Ratiometric, Step-Up
125 ¯C
-40 °C
20 mA, 40 mA
700 kHz
10-MSOP, 10-TFSOP
Surface Mount
10-VSSOP
2
Positive
0.9 V
27.03 °C/W
Texas Instruments
TPS60300DGSG4
Charge Pump Switching Regulator IC Positive Fixed 2Vin, 3.3V 2 Output 40mA, 20mA 10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
2Vin
3.3 V
1.8 V
Ratiometric, Step-Up
125 ¯C
-40 °C
20 mA, 40 mA
700 kHz
10-MSOP, 10-TFSOP
Surface Mount
10-VSSOP
2
Positive
0.9 V
27.03 °C/W
Texas Instruments
TPS60300DGSR
The TPS6030x devices are a family of switched-voltage converters designed specifically for space-critical battery powered applications. The TPS6030x step-up, regulated charge pumps generate a 3-V (±4%) or 3.3-V (±4%) output voltage from a 0.9-V to 1.8-V input voltage (one alkaline, NiCd, or NiMH battery). Only five small 1-µF ceramic capacitors are required to build a complete high efficiency DC-DC charge pump converter. To achieve the high efficiency over a wide input voltage range, the charge pump automatically selects between a 3× or 4× conversion mode. Output 1 (OUT1) can deliver a maximum of 40 mA from a 1-V input, with output 2 (OUT2) not loaded. OUT2 can deliver a maximum of 20 mA from a 1-V input, with OUT1 not loaded. Both outputs can be loaded at the same time, but the total output current of the first voltage doubler must not exceed 40 mA. For example, the load at output 1 is 20 mA and the load at output 2 is 10 mA. The devices operate in the newly developed LinSkip mode. In this operating mode, the device switches seamlessly from the power saving, pulse-skip mode at light loads, to the low-noise, constant-frequency linear-regulation mode, when the output current exceeds the device-specific output current threshold. A power-good function supervises the output voltage of OUT2 and can be used for power-up and power-down sequencing. Power good (PG) is offered as either open-drain or push-pull output. The TPS6030x devices are a family of switched-voltage converters designed specifically for space-critical battery powered applications. The TPS6030x step-up, regulated charge pumps generate a 3-V (±4%) or 3.3-V (±4%) output voltage from a 0.9-V to 1.8-V input voltage (one alkaline, NiCd, or NiMH battery). Only five small 1-µF ceramic capacitors are required to build a complete high efficiency DC-DC charge pump converter. To achieve the high efficiency over a wide input voltage range, the charge pump automatically selects between a 3× or 4× conversion mode. Output 1 (OUT1) can deliver a maximum of 40 mA from a 1-V input, with output 2 (OUT2) not loaded. OUT2 can deliver a maximum of 20 mA from a 1-V input, with OUT1 not loaded. Both outputs can be loaded at the same time, but the total output current of the first voltage doubler must not exceed 40 mA. For example, the load at output 1 is 20 mA and the load at output 2 is 10 mA. The devices operate in the newly developed LinSkip mode. In this operating mode, the device switches seamlessly from the power saving, pulse-skip mode at light loads, to the low-noise, constant-frequency linear-regulation mode, when the output current exceeds the device-specific output current threshold. A power-good function supervises the output voltage of OUT2 and can be used for power-up and power-down sequencing. Power good (PG) is offered as either open-drain or push-pull output.
2Vin
3.3 V
1.8 V
Ratiometric, Step-Up
125 ¯C
-40 °C
20 mA, 40 mA
700 kHz
10-MSOP, 10-TFSOP
Surface Mount
10-VSSOP
2
Positive
0.9 V
27.03 °C/W
Texas Instruments
TPS60300DGS
The TPS6030x devices are a family of switched-voltage converters designed specifically for space-critical battery powered applications. The TPS6030x step-up, regulated charge pumps generate a 3-V (±4%) or 3.3-V (±4%) output voltage from a 0.9-V to 1.8-V input voltage (one alkaline, NiCd, or NiMH battery). Only five small 1-µF ceramic capacitors are required to build a complete high efficiency DC-DC charge pump converter. To achieve the high efficiency over a wide input voltage range, the charge pump automatically selects between a 3× or 4× conversion mode. Output 1 (OUT1) can deliver a maximum of 40 mA from a 1-V input, with output 2 (OUT2) not loaded. OUT2 can deliver a maximum of 20 mA from a 1-V input, with OUT1 not loaded. Both outputs can be loaded at the same time, but the total output current of the first voltage doubler must not exceed 40 mA. For example, the load at output 1 is 20 mA and the load at output 2 is 10 mA. The devices operate in the newly developed LinSkip mode. In this operating mode, the device switches seamlessly from the power saving, pulse-skip mode at light loads, to the low-noise, constant-frequency linear-regulation mode, when the output current exceeds the device-specific output current threshold. A power-good function supervises the output voltage of OUT2 and can be used for power-up and power-down sequencing. Power good (PG) is offered as either open-drain or push-pull output. The TPS6030x devices are a family of switched-voltage converters designed specifically for space-critical battery powered applications. The TPS6030x step-up, regulated charge pumps generate a 3-V (±4%) or 3.3-V (±4%) output voltage from a 0.9-V to 1.8-V input voltage (one alkaline, NiCd, or NiMH battery). Only five small 1-µF ceramic capacitors are required to build a complete high efficiency DC-DC charge pump converter. To achieve the high efficiency over a wide input voltage range, the charge pump automatically selects between a 3× or 4× conversion mode. Output 1 (OUT1) can deliver a maximum of 40 mA from a 1-V input, with output 2 (OUT2) not loaded. OUT2 can deliver a maximum of 20 mA from a 1-V input, with OUT1 not loaded. Both outputs can be loaded at the same time, but the total output current of the first voltage doubler must not exceed 40 mA. For example, the load at output 1 is 20 mA and the load at output 2 is 10 mA. The devices operate in the newly developed LinSkip mode. In this operating mode, the device switches seamlessly from the power saving, pulse-skip mode at light loads, to the low-noise, constant-frequency linear-regulation mode, when the output current exceeds the device-specific output current threshold. A power-good function supervises the output voltage of OUT2 and can be used for power-up and power-down sequencing. Power good (PG) is offered as either open-drain or push-pull output.
2Vin
3.3 V
1.8 V
Ratiometric, Step-Up
125 ¯C
-40 °C
20 mA, 40 mA
700 kHz
10-MSOP, 10-TFSOP
Surface Mount
10-VSSOP
2
Positive
0.9 V
27.03 °C/W

Description

General part information

TPS60300 Series

Charge Pump Switching Regulator IC Positive Fixed 2Vin, 3.3V 2 Output 40mA, 20mA 10-TFSOP, 10-MSOP (0.118", 3.00mm Width)

Documents

Technical documentation and resources