Technical Specifications
Parameters and characteristics commom to parts in this series
| Specification | LP38841MR-ADJ | LP38841 Series |
|---|---|---|
| Control Features | Enable | Enable |
| Current - Output | 800 mA | 800 mA |
| Current - Quiescent (Iq) | 30 µA | 30 µA |
| Current - Supply (Max) [Max] | 40 mA | 40 mA |
| Mounting Type | Surface Mount | Surface Mount, Through Hole |
| Number of Regulators | 1 | 1 |
| Operating Temperature [Max] | 125 °C | 125 °C |
| Operating Temperature [Min] | -40 °C | -40 °C |
| Output Configuration | Positive | Positive |
| Output Type | Adjustable | Adjustable |
| Output Type | - | 27.03 °C/W |
| Package / Case | 8-PowerSOIC | TO-263BA, D2PAK (5 Leads + Tab), TO-263-6, 8-PowerSOIC, TO-220-5, TO-220-5 Formed Leads |
| Package / Case [custom] | 3.9 mm | 3.9 mm |
| Package / Case [custom] | 0.154 in | 0.154 in |
| Protection Features | Over Current, Short Circuit, Over Temperature | Over Current, Short Circuit, Over Temperature |
| PSRR [Max] | 80 dB | 80 dB |
| PSRR [Min] | 65 dB | 65 dB |
| Supplier Device Package | 8-SO PowerPad | TO-263 (DDPAK-5), 8-SO PowerPad, TO-220-5 |
| Voltage - Input (Max) [Max] | 5.5 V | 5.5 V |
| Voltage - Output (Max) [Max] | 1.5 V | 1.5 V |
| Voltage - Output (Min/Fixed) | 0.56 V | 0.56 - 1.5 V |
| Voltage Dropout (Max) [Max] | 0.21 V | 0.21 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
LP38841 Series
IC REG LINEAR 0.8V 800MA DDPAK
| Part | Voltage - Output (Min/Fixed) | Output Configuration | Operating Temperature [Max] | Operating Temperature [Min] | Protection Features | Voltage Dropout (Max) [Max] | Mounting Type | Current - Quiescent (Iq) | Number of Regulators | Output Type | Supplier Device Package | Package / Case | Voltage - Input (Max) [Max] | Current - Output | Current - Supply (Max) [Max] | Control Features | PSRR [Max] | PSRR [Min] | Package / Case [custom] | Package / Case [custom] | Output Type | Voltage - Output (Max) [Max] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments LP38841S-0.8Linear Voltage Regulator IC Positive Fixed 1 Output 800mA TO-263 (DDPAK-5) | 0.8 V | Positive | 125 °C | -40 °C | Over Current, Over Temperature, Short Circuit | 0.21 V | Surface Mount | 30 µA | 1 | 27.03 °C/W | TO-263 (DDPAK-5) | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | 5.5 V | 800 mA | 40 mA | Enable | 80 dB | 65 dB | ||||
Texas Instruments LP38841MRX-ADJ/NOPBThe LP38841-ADJ is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in the SO package.
Dropout Voltage:75 mV (typ) @ 0.8A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) when S/D pin is low.
Precision Reference Voltage:1.5% room temperature accuracy.
The LP38841-ADJ is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in the SO package.
Dropout Voltage:75 mV (typ) @ 0.8A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) when S/D pin is low.
Precision Reference Voltage:1.5% room temperature accuracy. | 0.56 V | Positive | 125 °C | -40 °C | Over Current, Over Temperature, Short Circuit | 0.21 V | Surface Mount | 30 µA | 1 | 8-SO PowerPad | 8-PowerSOIC | 5.5 V | 800 mA | 40 mA | Enable | 80 dB | 65 dB | 3.9 mm | 0.154 in | Adjustable | 1.5 V | |
Texas Instruments LP38841SX-0.8/NOPBLinear Voltage Regulator IC Positive Fixed 1 Output 800mA TO-263 (DDPAK-5) | 0.8 V | Positive | 125 °C | -40 °C | Over Current, Over Temperature, Short Circuit | 0.21 V | Surface Mount | 30 µA | 1 | 27.03 °C/W | TO-263 (DDPAK-5) | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | 5.5 V | 800 mA | 40 mA | Enable | 80 dB | 65 dB | ||||
Texas Instruments LP38841MR-ADJLinear Voltage Regulator IC Positive Adjustable 1 Output 800mA 8-SO PowerPad | 0.56 V | Positive | 125 °C | -40 °C | Over Current, Over Temperature, Short Circuit | 0.21 V | Surface Mount | 30 µA | 1 | 8-SO PowerPad | 8-PowerSOIC | 5.5 V | 800 mA | 40 mA | Enable | 80 dB | 65 dB | 3.9 mm | 0.154 in | Adjustable | 1.5 V | |
0.8 V | Positive | 125 °C | -40 °C | Over Current, Over Temperature, Short Circuit | 0.21 V | Through Hole | 30 µA | 1 | 27.03 °C/W | TO-220-5 | TO-220-5 | 5.5 V | 800 mA | 40 mA | Enable | 80 dB | 65 dB | |||||
Texas Instruments LP38841S-1.5/NOPBThe LP38841 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and DDPAK/TO-263 packages.
Dropout Voltage:75 mV (typ) at 0.8A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) whenS/Dpin is low.
Precision Output Voltage:1.5% room temperature accuracy.
The LP38841 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and DDPAK/TO-263 packages.
Dropout Voltage:75 mV (typ) at 0.8A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) whenS/Dpin is low.
Precision Output Voltage:1.5% room temperature accuracy. | 1.5 V | Positive | 125 °C | -40 °C | Over Current, Over Temperature, Short Circuit | 0.21 V | Surface Mount | 30 µA | 1 | 27.03 °C/W | TO-263 (DDPAK-5) | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | 5.5 V | 800 mA | 40 mA | Enable | 80 dB | 65 dB | ||||
Texas Instruments LP38841S-1.2Linear Voltage Regulator IC Positive Fixed 1 Output 800mA TO-263 (DDPAK-5) | 1.2 V | Positive | 125 °C | -40 °C | Over Current, Over Temperature, Short Circuit | 0.21 V | Surface Mount | 30 µA | 1 | 27.03 °C/W | TO-263 (DDPAK-5) | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | 5.5 V | 800 mA | 40 mA | Enable | 80 dB | 65 dB | ||||
Texas Instruments LP38841T-1.5/NOPBThe LP38841 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and DDPAK/TO-263 packages.
Dropout Voltage:75 mV (typ) at 0.8A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) whenS/Dpin is low.
Precision Output Voltage:1.5% room temperature accuracy.
The LP38841 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and DDPAK/TO-263 packages.
Dropout Voltage:75 mV (typ) at 0.8A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) whenS/Dpin is low.
Precision Output Voltage:1.5% room temperature accuracy. | 1.5 V | Positive | 125 °C | -40 °C | Over Current, Over Temperature, Short Circuit | 0.21 V | Through Hole | 30 µA | 1 | 27.03 °C/W | TO-220-5 | TO-220-5 | 5.5 V | 800 mA | 40 mA | Enable | 80 dB | 65 dB | ||||
Texas Instruments LP38841SX-1.5/NOPBThe LP38841 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and DDPAK/TO-263 packages.
Dropout Voltage:75 mV (typ) at 0.8A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) whenS/Dpin is low.
Precision Output Voltage:1.5% room temperature accuracy.
The LP38841 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and DDPAK/TO-263 packages.
Dropout Voltage:75 mV (typ) at 0.8A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) whenS/Dpin is low.
Precision Output Voltage:1.5% room temperature accuracy. | 1.5 V | Positive | 125 °C | -40 °C | Over Current, Over Temperature, Short Circuit | 0.21 V | Surface Mount | 30 µA | 1 | 27.03 °C/W | TO-263 (DDPAK-5) | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | 5.5 V | 800 mA | 40 mA | Enable | 80 dB | 65 dB | ||||
1.5 V | Positive | 125 °C | -40 °C | Over Current, Over Temperature, Short Circuit | 0.21 V | Through Hole | 30 µA | 1 | 27.03 °C/W | TO-220-5 | TO-220-5 | 5.5 V | 800 mA | 40 mA | Enable | 80 dB | 65 dB | |||||
Texas Instruments LP38841T-1.2/LF03The LP38841 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and DDPAK/TO-263 packages.
Dropout Voltage:75 mV (typ) at 0.8A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) whenS/Dpin is low.
Precision Output Voltage:1.5% room temperature accuracy.
The LP38841 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and DDPAK/TO-263 packages.
Dropout Voltage:75 mV (typ) at 0.8A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) whenS/Dpin is low.
Precision Output Voltage:1.5% room temperature accuracy. | 1.2 V | Positive | 125 °C | -40 °C | Over Current, Over Temperature, Short Circuit | 0.21 V | Through Hole | 30 µA | 1 | 27.03 °C/W | TO-220-5 | TO-220-5 Formed Leads | 5.5 V | 800 mA | 40 mA | Enable | 80 dB | 65 dB | ||||
Texas Instruments LP38841T-1.2/NOPBThe LP38841 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and DDPAK/TO-263 packages.
Dropout Voltage:75 mV (typ) at 0.8A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) whenS/Dpin is low.
Precision Output Voltage:1.5% room temperature accuracy.
The LP38841 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and DDPAK/TO-263 packages.
Dropout Voltage:75 mV (typ) at 0.8A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) whenS/Dpin is low.
Precision Output Voltage:1.5% room temperature accuracy. | 1.2 V | Positive | 125 °C | -40 °C | Over Current, Over Temperature, Short Circuit | 0.21 V | Through Hole | 30 µA | 1 | 27.03 °C/W | TO-220-5 | TO-220-5 | 5.5 V | 800 mA | 40 mA | Enable | 80 dB | 65 dB | ||||
Texas Instruments LP38841S-1.5Linear Voltage Regulator IC Positive Fixed 1 Output 800mA TO-263 (DDPAK-5) | 1.5 V | Positive | 125 °C | -40 °C | Over Current, Over Temperature, Short Circuit | 0.21 V | Surface Mount | 30 µA | 1 | 27.03 °C/W | TO-263 (DDPAK-5) | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | 5.5 V | 800 mA | 40 mA | Enable | 80 dB | 65 dB | ||||
Texas Instruments LP38841T-0.8/NOPBThe LP38841 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and DDPAK/TO-263 packages.
Dropout Voltage:75 mV (typ) at 0.8A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) whenS/Dpin is low.
Precision Output Voltage:1.5% room temperature accuracy.
The LP38841 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and DDPAK/TO-263 packages.
Dropout Voltage:75 mV (typ) at 0.8A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) whenS/Dpin is low.
Precision Output Voltage:1.5% room temperature accuracy. | 0.8 V | Positive | 125 °C | -40 °C | Over Current, Over Temperature, Short Circuit | 0.21 V | Through Hole | 30 µA | 1 | 27.03 °C/W | TO-220-5 | TO-220-5 | 5.5 V | 800 mA | 40 mA | Enable | 80 dB | 65 dB | ||||
Texas Instruments LP38841SX-1.2/NOPBThe LP38841 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and DDPAK/TO-263 packages.
Dropout Voltage:75 mV (typ) at 0.8A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) whenS/Dpin is low.
Precision Output Voltage:1.5% room temperature accuracy.
The LP38841 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and DDPAK/TO-263 packages.
Dropout Voltage:75 mV (typ) at 0.8A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) whenS/Dpin is low.
Precision Output Voltage:1.5% room temperature accuracy. | 1.2 V | Positive | 125 °C | -40 °C | Over Current, Over Temperature, Short Circuit | 0.21 V | Surface Mount | 30 µA | 1 | 27.03 °C/W | TO-263 (DDPAK-5) | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | 5.5 V | 800 mA | 40 mA | Enable | 80 dB | 65 dB | ||||
Texas Instruments LP38841S-0.8/NOPBThe LP38841 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and DDPAK/TO-263 packages.
Dropout Voltage:75 mV (typ) at 0.8A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) whenS/Dpin is low.
Precision Output Voltage:1.5% room temperature accuracy.
The LP38841 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and DDPAK/TO-263 packages.
Dropout Voltage:75 mV (typ) at 0.8A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) whenS/Dpin is low.
Precision Output Voltage:1.5% room temperature accuracy. | 0.8 V | Positive | 125 °C | -40 °C | Over Current, Over Temperature, Short Circuit | 0.21 V | Surface Mount | 30 µA | 1 | 27.03 °C/W | TO-263 (DDPAK-5) | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | 5.5 V | 800 mA | 40 mA | Enable | 80 dB | 65 dB | ||||
Texas Instruments LP38841MRX-ADJLinear Voltage Regulator IC Positive Adjustable 1 Output 800mA 8-SO PowerPad | 0.56 V | Positive | 125 °C | -40 °C | Over Current, Over Temperature, Short Circuit | 0.21 V | Surface Mount | 30 µA | 1 | 8-SO PowerPad | 8-PowerSOIC | 5.5 V | 800 mA | 40 mA | Enable | 80 dB | 65 dB | 3.9 mm | 0.154 in | Adjustable | 1.5 V | |
Texas Instruments LP38841MR-ADJ/NOPBThe LP38841-ADJ is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in the SO package.
Dropout Voltage:75 mV (typ) @ 0.8A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) when S/D pin is low.
Precision Reference Voltage:1.5% room temperature accuracy.
The LP38841-ADJ is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in the SO package.
Dropout Voltage:75 mV (typ) @ 0.8A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) when S/D pin is low.
Precision Reference Voltage:1.5% room temperature accuracy. | 0.56 V | Positive | 125 °C | -40 °C | Over Current, Over Temperature, Short Circuit | 0.21 V | Surface Mount | 30 µA | 1 | 8-SO PowerPad | 8-PowerSOIC | 5.5 V | 800 mA | 40 mA | Enable | 80 dB | 65 dB | 3.9 mm | 0.154 in | Adjustable | 1.5 V |
Description
General part information
LP38841 Series
Linear Voltage Regulator IC Positive Adjustable 1 Output 800mA 8-SO PowerPad