TPS22963CYZPR

Active

Texas Instruments

IC PWR SWITCH N-CHAN 1:1 6DSBGA

Find alt

Alpha

TPS22963CYZPR

Active

Texas Instruments

IC PWR SWITCH N-CHAN 1:1 6DSBGA

Find alt

Alpha

Description Specifications Series Pricing CAD Documents

Description

General part information

TPS22963 Series

The TPS22963/64 is a small, ultra-low RONload switch with controlled turn on. The device contains a low RDSONN-Channel MOSFET that can operate over an input voltage range of 1 V to 5.5 V and switch currents of up to 3 A. An integrated charge pump biases the NMOS switch in order to achieve a low switch ON-Resistance. The switch is controlled by an on/off input (ON), which is capable of interfacing directly with low-voltage GPIO control signals. The rise time of the TPS22963/64 device is internally controlled in order to avoid inrush current.

The TPS22963/64 provides reverse current protection. When the power switch is disabled, the device will not allow the flow of current towards the input side of the switch. The reverse current protection feature is active only when the device is disabled so as to allow for intentional reverse current (when the switch is enabled) for some applications.

The TPS22963/64 is available in a small, space-saving 6-pin WCSP package and is characterized for operation over the free air temperature range of –40°C to 85°C.

Technical Specifications

Parameters and characteristics for this part

Specification	TPS22963CYZPR

Current - Output (Max)	3 A
Fault Protection	Reverse Current
Features	Slew Rate Controlled
Input Ratio	1
Input Type	Non-Inverting
Interface	On/Off
Mounting Type	Surface Mount
Number of Outputs	1
Operating Temperature (Max)	85 °C
Operating Temperature (Min)	-40 °C
Output Configuration	High Side
Output Ratio	1
Output Type	N-Channel
Package / Case	DSBGA, 6-XFBGA
Package Length	1.39 mm
Package Name	6-DSBGA
Package Width	0.89 mm
Rds On (Typ)	13.3 mOhm
Switch Type	General Purpose
Voltage - Load (Max)	5.5 V
Voltage - Load (Min)	1 V
Voltage - Supply (Vcc/Vdd)	Not Required
Voltage - Supply (Vdd/Vcc)	Not Required

TPS22963 Series

5.5-V, 3-A, 14-mΩ load switch

Part	Features	Current - Output (Max)	Fault Protection	Number of Outputs	Voltage - Supply (Vdd/Vcc)	Voltage - Supply (Vcc/Vdd)	Output Ratio	Input Ratio	Output Configuration	Input Type	Interface	Output Type	Operating Temperature (Max)	Operating Temperature (Min)	Mounting Type	Switch Type	Package / Case	Rds On (Typ)	Package Name	Voltage - Load (Min)	Voltage - Load (Max)	Supplied Contents	Type	Function	Contents	Utilized IC / Part	Package Width	Package Length
Texas Instruments TPS22963CYZPT	Slew Rate Controlled	3 A	Reverse Current	1	Not Required	Not Required	1	1	High Side	Non-Inverting	On/Off	N-Channel	85 °C	-40 °C	Surface Mount	General Purpose	6-XFBGA DSBGA	13.3 mOhm	6-DSBGA	1 V	5.5 V
Texas Instruments TPS22963CEVM-029																						Board(s)	Power Management	Power Distribution Switch (Load Switch)	Board	TPS22963C
Texas Instruments TPS22963CYZPR	Slew Rate Controlled	3 A	Reverse Current	1	Not Required	Not Required	1	1	High Side	Non-Inverting	On/Off	N-Channel	85 °C	-40 °C	Surface Mount	General Purpose	6-XFBGA DSBGA	13.3 mOhm	6-DSBGA	1 V	5.5 V						0.89 mm	1.39 mm