LP38852SX-ADJ/NOPB
ActiveTexas Instruments
1.5-A, LOW-VIN (0.93-V), ADJUSTABLE ULTRA-LOW-DROPOUT VOLTAGE REGULATOR WITH ENABLE
Deep-Dive with AI
Search across all available documentation for this part.
LP38852SX-ADJ/NOPB
ActiveTexas Instruments
1.5-A, LOW-VIN (0.93-V), ADJUSTABLE ULTRA-LOW-DROPOUT VOLTAGE REGULATOR WITH ENABLE
Deep-Dive with AI
Technical Specifications
Parameters and characteristics commom to parts in this series
| Specification | LP38852SX-ADJ/NOPB | LP38852 Series |
|---|---|---|
| Control Features | Soft Start, Enable | Soft Start, Enable |
| Current - Output | 1.5 A | 1.5 A |
| Current - Quiescent (Iq) | 300 µA | 300 µA |
| Current - Supply (Max) [Max] | 9 mA | 9 mA |
| Mounting Type | Surface Mount | Surface Mount, Through Hole |
| Number of Regulators | 1 | 1 |
| Operating Temperature [Max] | 125 °C | 125 °C |
| Operating Temperature [Min] | -40 °C | -40 °C |
| Output Configuration | Positive | Positive |
| Output Type | Adjustable | Adjustable |
| Package / Case | TO-263-8, TO-263CA, D2PAK | TO-263-8, TO-263CA, D2PAK, TO-220-7 Formed Leads, 8-PowerSOIC |
| Package / Case | - | 3.9 mm |
| Package / Case | - | 0.154 in |
| Protection Features | Under Voltage Lockout (UVLO), Over Temperature, Over Current, Short Circuit | Under Voltage Lockout (UVLO), Over Temperature, Over Current, Short Circuit |
| PSRR [Max] | 80 dB | 80 dB |
| PSRR [Min] | 65 dB | 65 dB |
| Supplier Device Package | TO-263 (DDPAK-7) | TO-263 (DDPAK-7), TO-220-7, 8-SO PowerPad |
| Voltage - Input (Max) [Max] | 5.5 V | 5.5 V |
| Voltage - Output (Max) [Max] | 1.8 V | 1.8 V |
| Voltage - Output (Min/Fixed) | 0.8 V | 0.8 V |
| Voltage Dropout (Max) [Max] | 0.18 V | 0.18 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
LP38852 Series
1.5-A, LOW-VIN (0.93-V), ADJUSTABLE ULTRA-LOW-DROPOUT VOLTAGE REGULATOR WITH ENABLE
| Part | Output Configuration | Mounting Type | PSRR [Max] | PSRR [Min] | Voltage - Output (Max) [Max] | Operating Temperature [Max] | Operating Temperature [Min] | Control Features | Protection Features | Voltage - Input (Max) [Max] | Voltage Dropout (Max) [Max] | Current - Supply (Max) [Max] | Output Type | Voltage - Output (Min/Fixed) | Number of Regulators | Current - Output | Supplier Device Package | Package / Case | Current - Quiescent (Iq) | Package / Case [custom] | Package / Case [custom] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments LP38852SX-ADJ/NOPBThe LP38852-ADJ is a high-current, fast-response regulator which can maintain output voltage regulation with extremely low input-to-output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: VBIASprovides voltage to drive the gate of the N-MOS power transistor, while VINis the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultralow VINvoltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of this device makes it suitable for use in powering DSP, microcontroller core voltages, and switch-mode power supply post-regulators.
130 mV (typical) at 1.5-A load current.
10 mA (typical) at 1.5-A load current.
Programmable soft-start time.
The LP38852-ADJ is a high-current, fast-response regulator which can maintain output voltage regulation with extremely low input-to-output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: VBIASprovides voltage to drive the gate of the N-MOS power transistor, while VINis the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultralow VINvoltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of this device makes it suitable for use in powering DSP, microcontroller core voltages, and switch-mode power supply post-regulators.
130 mV (typical) at 1.5-A load current.
10 mA (typical) at 1.5-A load current.
Programmable soft-start time. | Positive | Surface Mount | 80 dB | 65 dB | 1.8 V | 125 °C | -40 °C | Enable, Soft Start | Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO) | 5.5 V | 0.18 V | 9 mA | Adjustable | 0.8 V | 1 | 1.5 A | TO-263 (DDPAK-7) | D2PAK, TO-263-8, TO-263CA | 300 µA | ||
Positive | Through Hole | 80 dB | 65 dB | 1.8 V | 125 °C | -40 °C | Enable, Soft Start | Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO) | 5.5 V | 0.18 V | 9 mA | Adjustable | 0.8 V | 1 | 1.5 A | TO-220-7 | TO-220-7 Formed Leads | 300 µA | |||
Texas Instruments LP38852MR-ADJ/NOPBThe LP38852-ADJ is a high-current, fast-response regulator which can maintain output voltage regulation with extremely low input-to-output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: VBIASprovides voltage to drive the gate of the N-MOS power transistor, while VINis the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultralow VINvoltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of this device makes it suitable for use in powering DSP, microcontroller core voltages, and switch-mode power supply post-regulators.
130 mV (typical) at 1.5-A load current.
10 mA (typical) at 1.5-A load current.
Programmable soft-start time.
The LP38852-ADJ is a high-current, fast-response regulator which can maintain output voltage regulation with extremely low input-to-output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: VBIASprovides voltage to drive the gate of the N-MOS power transistor, while VINis the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultralow VINvoltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of this device makes it suitable for use in powering DSP, microcontroller core voltages, and switch-mode power supply post-regulators.
130 mV (typical) at 1.5-A load current.
10 mA (typical) at 1.5-A load current.
Programmable soft-start time. | Positive | Surface Mount | 80 dB | 65 dB | 1.8 V | 125 °C | -40 °C | Enable, Soft Start | Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO) | 5.5 V | 0.18 V | 9 mA | Adjustable | 0.8 V | 1 | 1.5 A | 8-SO PowerPad | 8-PowerSOIC | 300 µA | 3.9 mm | 0.154 in |
Texas Instruments LP38852MR-ADJLinear Voltage Regulator IC Positive Adjustable 1 Output 1.5A 8-SO PowerPad | Positive | Surface Mount | 80 dB | 65 dB | 1.8 V | 125 °C | -40 °C | Enable, Soft Start | Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO) | 5.5 V | 0.18 V | 9 mA | Adjustable | 0.8 V | 1 | 1.5 A | 8-SO PowerPad | 8-PowerSOIC | 300 µA | 3.9 mm | 0.154 in |
Texas Instruments LP38852S-ADJ/NOPBThe LP38852-ADJ is a high-current, fast-response regulator which can maintain output voltage regulation with extremely low input-to-output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: VBIASprovides voltage to drive the gate of the N-MOS power transistor, while VINis the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultralow VINvoltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of this device makes it suitable for use in powering DSP, microcontroller core voltages, and switch-mode power supply post-regulators.
130 mV (typical) at 1.5-A load current.
10 mA (typical) at 1.5-A load current.
Programmable soft-start time.
The LP38852-ADJ is a high-current, fast-response regulator which can maintain output voltage regulation with extremely low input-to-output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: VBIASprovides voltage to drive the gate of the N-MOS power transistor, while VINis the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultralow VINvoltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of this device makes it suitable for use in powering DSP, microcontroller core voltages, and switch-mode power supply post-regulators.
130 mV (typical) at 1.5-A load current.
10 mA (typical) at 1.5-A load current.
Programmable soft-start time. | Positive | Surface Mount | 80 dB | 65 dB | 1.8 V | 125 °C | -40 °C | Enable, Soft Start | Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO) | 5.5 V | 0.18 V | 9 mA | Adjustable | 0.8 V | 1 | 1.5 A | TO-263 (DDPAK-7) | D2PAK, TO-263-8, TO-263CA | 300 µA | ||
Texas Instruments LP38852SX-ADJLinear Voltage Regulator IC Positive Adjustable 1 Output 1.5A TO-263 (DDPAK-7) | Positive | Surface Mount | 80 dB | 65 dB | 1.8 V | 125 °C | -40 °C | Enable, Soft Start | Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO) | 5.5 V | 0.18 V | 9 mA | Adjustable | 0.8 V | 1 | 1.5 A | TO-263 (DDPAK-7) | D2PAK, TO-263-8, TO-263CA | 300 µA | ||
Texas Instruments LP38852T-ADJ/NOPBThe LP38852-ADJ is a high-current, fast-response regulator which can maintain output voltage regulation with extremely low input-to-output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: VBIASprovides voltage to drive the gate of the N-MOS power transistor, while VINis the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultralow VINvoltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of this device makes it suitable for use in powering DSP, microcontroller core voltages, and switch-mode power supply post-regulators.
130 mV (typical) at 1.5-A load current.
10 mA (typical) at 1.5-A load current.
Programmable soft-start time.
The LP38852-ADJ is a high-current, fast-response regulator which can maintain output voltage regulation with extremely low input-to-output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: VBIASprovides voltage to drive the gate of the N-MOS power transistor, while VINis the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultralow VINvoltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of this device makes it suitable for use in powering DSP, microcontroller core voltages, and switch-mode power supply post-regulators.
130 mV (typical) at 1.5-A load current.
10 mA (typical) at 1.5-A load current.
Programmable soft-start time. | Positive | Through Hole | 80 dB | 65 dB | 1.8 V | 125 °C | -40 °C | Enable, Soft Start | Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO) | 5.5 V | 0.18 V | 9 mA | Adjustable | 0.8 V | 1 | 1.5 A | TO-220-7 | TO-220-7 Formed Leads | 300 µA | ||
Texas Instruments LP38852S-ADJLinear Voltage Regulator IC Positive Adjustable 1 Output 1.5A TO-263 (DDPAK-7) | Positive | Surface Mount | 80 dB | 65 dB | 1.8 V | 125 °C | -40 °C | Enable, Soft Start | Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO) | 5.5 V | 0.18 V | 9 mA | Adjustable | 0.8 V | 1 | 1.5 A | TO-263 (DDPAK-7) | D2PAK, TO-263-8, TO-263CA | 300 µA | ||
Texas Instruments LP38852MRX-ADJLinear Voltage Regulator IC Positive Adjustable 1 Output 1.5A 8-SO PowerPad | Positive | Surface Mount | 80 dB | 65 dB | 1.8 V | 125 °C | -40 °C | Enable, Soft Start | Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO) | 5.5 V | 0.18 V | 9 mA | Adjustable | 0.8 V | 1 | 1.5 A | 8-SO PowerPad | 8-PowerSOIC | 300 µA | 3.9 mm | 0.154 in |
Description
General part information
LP38852 Series
The LP38852-ADJ is a high-current, fast-response regulator which can maintain output voltage regulation with extremely low input-to-output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: VBIASprovides voltage to drive the gate of the N-MOS power transistor, while VINis the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultralow VINvoltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of this device makes it suitable for use in powering DSP, microcontroller core voltages, and switch-mode power supply post-regulators.
130 mV (typical) at 1.5-A load current.
Documents
Technical documentation and resources