Technical Specifications
Parameters and characteristics commom to parts in this series
| Specification | TPS71256DRCTG4 | TPS71256 Series |
|---|---|---|
| Control Features | Power Good, Enable | Power Good, Enable |
| Current - Output | 250 mA | 250 mA |
| Current - Supply (Max) [Max] | 600 µA | 600 µA |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Regulators | 2 | 2 |
| Operating Temperature [Max] | 125 °C | 125 °C |
| Operating Temperature [Min] | -40 °C | -40 °C |
| Output Configuration | Positive | Positive |
| Output Type | 27.03 °C/W | 27.03 °C/W |
| Package / Case | 10-VFDFN Exposed Pad | 10-VFDFN Exposed Pad |
| Protection Features | Reverse Polarity, Over Temperature, Under Voltage Lockout (UVLO) | Reverse Polarity, Over Temperature, Under Voltage Lockout (UVLO) |
| PSRR [Max] | 59 dB | 59 dB |
| PSRR [Min] | 54 dB | 54 dB |
| Supplier Device Package | 10-VSON (3x3) | 10-VSON (3x3) |
| Voltage - Input (Max) [Max] | 5.5 V | 5.5 V |
| Voltage - Output (Min/Fixed) | 2.8 V | 2.8 V |
| Voltage Dropout (Max) | 0.4 V | 0.4 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
TPS71256 Series
IC REG LINEAR 2.8V 250MA 10VSON
| Part | Supplier Device Package | PSRR [Min] | PSRR [Max] | Protection Features | Voltage Dropout (Max) | Package / Case | Voltage - Input (Max) [Max] | Mounting Type | Control Features | Operating Temperature [Max] | Operating Temperature [Min] | Number of Regulators | Current - Supply (Max) [Max] | Current - Output | Output Type | Voltage - Output (Min/Fixed) | Output Configuration |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS71256DRCTG4Linear Voltage Regulator IC Positive Fixed 2 Output 250mA 10-VSON (3x3) | 10-VSON (3x3) | 54 dB | 59 dB | Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO) | 0.4 V | 10-VFDFN Exposed Pad | 5.5 V | Surface Mount | Enable, Power Good | 125 °C | -40 °C | 2 | 600 µA | 250 mA | 27.03 °C/W | 2.8 V | Positive |
Texas Instruments TPS71256DRCRLinear Voltage Regulator IC Positive Fixed 2 Output 250mA 10-VSON (3x3) | 10-VSON (3x3) | 54 dB | 59 dB | Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO) | 0.4 V | 10-VFDFN Exposed Pad | 5.5 V | Surface Mount | Enable, Power Good | 125 °C | -40 °C | 2 | 600 µA | 250 mA | 27.03 °C/W | 2.8 V | Positive |
Texas Instruments TPS71256DRCRG4Linear Voltage Regulator IC Positive Fixed 2 Output 250mA 10-VSON (3x3) | 10-VSON (3x3) | 54 dB | 59 dB | Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO) | 0.4 V | 10-VFDFN Exposed Pad | 5.5 V | Surface Mount | Enable, Power Good | 125 °C | -40 °C | 2 | 600 µA | 250 mA | 27.03 °C/W | 2.8 V | Positive |
Texas Instruments TPS71256DRCTThe TPS712xx family of low-dropout (LDO) voltage regulators is tailored to noise-sensitive and RF applications. These products feature dual 250 mA LDOs with ultralow noise, high power-supply rejection ratio (PSRR), and fast transient and start-up response. Each regulator output is stable with low-cost 2.2 µF ceramic output capacitors and features very low dropout voltages (125 mV typical at 250 mA). Each regulator achieves fast start-up times (approximately 60 µs with a 0.001 µF bypass capacitor) while consuming very low quiescent current (300 µA typical with both outputs enabled). When the device is placed in standby mode, the supply current is reduced to less than 0.3 µA typical. Each regulator exhibits approximately 32 µrms of output voltage noise with VOUT= 2.8 V and a 0.01 µF noise reduction (NR) capacitor. Applications with analog components that are noise-sensitive, such as portable RF electronics, will benefit from high PSRR, low noise, and fast line and load transient features. The TPS712 family is offered in a thin 3mm × 3mm SON package and is fully specified from –40°C to +125°C (TJ).
The TPS712xx family of low-dropout (LDO) voltage regulators is tailored to noise-sensitive and RF applications. These products feature dual 250 mA LDOs with ultralow noise, high power-supply rejection ratio (PSRR), and fast transient and start-up response. Each regulator output is stable with low-cost 2.2 µF ceramic output capacitors and features very low dropout voltages (125 mV typical at 250 mA). Each regulator achieves fast start-up times (approximately 60 µs with a 0.001 µF bypass capacitor) while consuming very low quiescent current (300 µA typical with both outputs enabled). When the device is placed in standby mode, the supply current is reduced to less than 0.3 µA typical. Each regulator exhibits approximately 32 µrms of output voltage noise with VOUT= 2.8 V and a 0.01 µF noise reduction (NR) capacitor. Applications with analog components that are noise-sensitive, such as portable RF electronics, will benefit from high PSRR, low noise, and fast line and load transient features. The TPS712 family is offered in a thin 3mm × 3mm SON package and is fully specified from –40°C to +125°C (TJ). | 10-VSON (3x3) | 54 dB | 59 dB | Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO) | 0.4 V | 10-VFDFN Exposed Pad | 5.5 V | Surface Mount | Enable, Power Good | 125 °C | -40 °C | 2 | 600 µA | 250 mA | 27.03 °C/W | 2.8 V | Positive |
Description
General part information
TPS71256 Series
Linear Voltage Regulator IC Positive Fixed 2 Output 250mA 10-VSON (3x3)