Technical Specifications
Parameters and characteristics commom to parts in this series
| Specification | TPS76750QPWPREP | TPS76750 Series |
|---|---|---|
| Control Features | Enable, Reset | Enable, Reset |
| Current - Output | 1 A | 1 A |
| Current - Quiescent (Iq) | 125 µA | 125 µA |
| Grade | - | Automotive |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Regulators | 1 | 1 |
| Operating Temperature [Max] | 125 °C | 125 °C |
| Operating Temperature [Min] | -40 °C | -40 °C |
| Output Configuration | Positive | Positive |
| Output Type | 27.03 °C/W | 27.03 °C/W |
| Package / Case | 20-PowerTSSOP | 8-SOIC, 20-PowerTSSOP |
| Package / Case | - | 3.9 mm |
| Package / Case [custom] | 0.173 in | 0.173 in |
| Package / Case [custom] | 4.4 mm | 4.4 mm |
| Protection Features | Over Temperature, Reverse Polarity, Over Current | Over Temperature, Reverse Polarity, Over Current |
| PSRR | 60 dB | 60 dB |
| Qualification | - | AEC-Q100 |
| Supplier Device Package | 20-HTSSOP | 8-SOIC, 20-HTSSOP |
| Voltage - Input (Max) [Max] | 10 V | 10 V |
| Voltage - Output (Min/Fixed) | 5 V | 5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
TPS76750 Series
IC REG LINEAR 5V 1A 8SOIC
| Part | Output Configuration | Voltage - Output (Min/Fixed) | Number of Regulators | PSRR | Control Features | Protection Features | Output Type | Operating Temperature [Max] | Operating Temperature [Min] | Voltage - Input (Max) [Max] | Current - Quiescent (Iq) | Mounting Type | Package / Case | Package / Case | Supplier Device Package | Current - Output | Qualification | Package / Case [custom] | Package / Case [custom] | Grade |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Positive | 5 V | 1 | 60 dB | Enable, Reset | Over Current, Over Temperature, Reverse Polarity | 27.03 °C/W | 125 °C | -40 °C | 10 V | 125 µA | Surface Mount | 3.9 mm | 8-SOIC | 8-SOIC | 1 A | |||||
Texas Instruments TPS76750QPWPRQ1These devices are designed to have a fast transient response and be stable with 10-µF low ESR capacitors. This combination provides high performance at a reasonable cost.
Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76750) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This low-dropout (LDO) family also features a sleep mode; applying a TTL high signal to enable (EN) input shuts down the regulator, reducing the quiescent current to 1 µA at TJ= 25°C.
TheRESEToutput of the TPS767xx initiates a reset in microcomputer and microprocessor systems in the event of an undervoltage condition. An internal comparator in the TPS767xx monitors the output voltage of the regulator to detect an undervoltage condition on the regulated output voltage.
The TPS767xx is offered in 1.5-V, 1.8-V, 2.5-V, 2.7-V, 2.8-V, 3-V, 3.3-V, and 5-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.5 V to 5.5 V). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges. The TPS767xx family is available in a 20-pin PWP package.
These devices are designed to have a fast transient response and be stable with 10-µF low ESR capacitors. This combination provides high performance at a reasonable cost.
Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76750) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This low-dropout (LDO) family also features a sleep mode; applying a TTL high signal to enable (EN) input shuts down the regulator, reducing the quiescent current to 1 µA at TJ= 25°C.
TheRESEToutput of the TPS767xx initiates a reset in microcomputer and microprocessor systems in the event of an undervoltage condition. An internal comparator in the TPS767xx monitors the output voltage of the regulator to detect an undervoltage condition on the regulated output voltage.
The TPS767xx is offered in 1.5-V, 1.8-V, 2.5-V, 2.7-V, 2.8-V, 3-V, 3.3-V, and 5-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.5 V to 5.5 V). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges. The TPS767xx family is available in a 20-pin PWP package. | Positive | 5 V | 1 | 60 dB | Enable, Reset | Over Current, Over Temperature, Reverse Polarity | 27.03 °C/W | 125 °C | -40 °C | 10 V | 125 µA | Surface Mount | 20-PowerTSSOP | 20-HTSSOP | 1 A | AEC-Q100 | 0.173 in | 4.4 mm | Automotive | |
Positive | 5 V | 1 | 60 dB | Enable, Reset | Over Current, Over Temperature, Reverse Polarity | 27.03 °C/W | 125 °C | -40 °C | 10 V | 125 µA | Surface Mount | 20-PowerTSSOP | 20-HTSSOP | 1 A | 0.173 in | 4.4 mm | ||||
Positive | 5 V | 1 | 60 dB | Enable, Reset | Over Current, Over Temperature, Reverse Polarity | 27.03 °C/W | 125 °C | -40 °C | 10 V | 125 µA | Surface Mount | 20-PowerTSSOP | 20-HTSSOP | 1 A | 0.173 in | 4.4 mm | ||||
Positive | 5 V | 1 | 60 dB | Enable, Reset | Over Current, Over Temperature, Reverse Polarity | 27.03 °C/W | 125 °C | -40 °C | 10 V | 125 µA | Surface Mount | 20-PowerTSSOP | 20-HTSSOP | 1 A | 0.173 in | 4.4 mm |
Description
General part information
TPS76750 Series
Linear Voltage Regulator IC Positive Fixed 1 Output 1A 20-HTSSOP