TPS61002DGSR
ActiveLOW INPUT VOLTAGE NON-SYNCHRONOUS BOOST CONVERTER WITH FIXED 1.8-V OUTPUT 10-VSSOP -40 TO 125
Deep-Dive with AI
Search across all available documentation for this part.
TPS61002DGSR
ActiveLOW INPUT VOLTAGE NON-SYNCHRONOUS BOOST CONVERTER WITH FIXED 1.8-V OUTPUT 10-VSSOP -40 TO 125
Technical Specifications
Parameters and characteristics commom to parts in this series
| Specification | TPS61002DGSR | TPS61002 Series |
|---|---|---|
| Current - Output | 1.3 A | 1.3 A |
| Frequency - Switching | 500 kHz | 500 kHz |
| Function | Step-Up | Step-Up |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Outputs | 1 | 1 |
| Operating Temperature [Max] | 85 °C | 85 °C |
| Operating Temperature [Min] | -40 °C | -40 °C |
| Output Configuration | Positive | Positive |
| Output Type | 27.03 °C/W | 27.03 °C/W |
| Package / Case | 10-TFSOP, 10-MSOP | 10-TFSOP, 10-MSOP |
| Supplier Device Package | 10-VSSOP | 10-VSSOP |
| Synchronous Rectifier | False | False |
| Topology | Boost | Boost |
| Voltage - Input (Max) [Max] | 1.8 V | 1.8 V |
| Voltage - Input (Min) [Min] | 0.8 V | 0.8 V |
| Voltage - Output (Min/Fixed) | 1.8 V | 1.8 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
TPS61002 Series
IC REG BOOST 1.8V 1.3A 10VSSOP
| Part | Output Type | Current - Output | Mounting Type | Topology | Voltage - Output (Min/Fixed) | Supplier Device Package | Number of Outputs | Synchronous Rectifier | Function | Output Configuration | Package / Case | Operating Temperature [Max] | Operating Temperature [Min] | Frequency - Switching | Voltage - Input (Min) [Min] | Voltage - Input (Max) [Max] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS61002DGSBoost Switching Regulator IC Positive Fixed 1.8V 1 Output 1.3A (Switch) 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | 27.03 °C/W | 1.3 A | Surface Mount | Boost | 1.8 V | 10-VSSOP | 1 | Step-Up | Positive | 10-MSOP, 10-TFSOP | 85 °C | -40 °C | 500 kHz | 0.8 V | 1.8 V | |
Texas Instruments TPS61002DGSG4Boost Switching Regulator IC Positive Fixed 1.8V 1 Output 1.3A (Switch) 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | 27.03 °C/W | 1.3 A | Surface Mount | Boost | 1.8 V | 10-VSSOP | 1 | Step-Up | Positive | 10-MSOP, 10-TFSOP | 85 °C | -40 °C | 500 kHz | 0.8 V | 1.8 V | |
Texas Instruments TPS61002DGSRThe TPS6100x devices are boost converters intended for systems that are typically operated from a single- or dual-cell nickel-cadmium (NiCd), nickel-metal hydride (NiMH), or alkaline battery. The converter output voltage can be adjusted from 1.5 V to a maximum of 3.3 V and provides a minimum output current of 100 mA from a single battery cell and 250 mA from two battery cells. The converter starts up into a full load with a supply voltage of 0.9 V and stays in operation with supply voltages as low as 0.8 V.
The converter is based on a fixed-frequency, current-mode pulse-width-modulation (PWM) controller that goes into power-save mode at low load currents. The current through the switch is limited to a maximum of 1100 mA, depending on the output voltage. The current sense is integrated to further minimize external component count. The converter can be disabled to minimize battery drain when the system is put into standby.
A low-EMI mode is implemented to reduce interference and radiated electromagnetic energy that is caused by the ringing of the inductor when the inductor discharge-current decreases to zero. The device is packaged in the space-saving 10-pin MSOP package.
The TPS6100x devices are boost converters intended for systems that are typically operated from a single- or dual-cell nickel-cadmium (NiCd), nickel-metal hydride (NiMH), or alkaline battery. The converter output voltage can be adjusted from 1.5 V to a maximum of 3.3 V and provides a minimum output current of 100 mA from a single battery cell and 250 mA from two battery cells. The converter starts up into a full load with a supply voltage of 0.9 V and stays in operation with supply voltages as low as 0.8 V.
The converter is based on a fixed-frequency, current-mode pulse-width-modulation (PWM) controller that goes into power-save mode at low load currents. The current through the switch is limited to a maximum of 1100 mA, depending on the output voltage. The current sense is integrated to further minimize external component count. The converter can be disabled to minimize battery drain when the system is put into standby.
A low-EMI mode is implemented to reduce interference and radiated electromagnetic energy that is caused by the ringing of the inductor when the inductor discharge-current decreases to zero. The device is packaged in the space-saving 10-pin MSOP package. | 27.03 °C/W | 1.3 A | Surface Mount | Boost | 1.8 V | 10-VSSOP | 1 | Step-Up | Positive | 10-MSOP, 10-TFSOP | 85 °C | -40 °C | 500 kHz | 0.8 V | 1.8 V |
Description
General part information
TPS61002 Series
The TPS6100x devices are boost converters intended for systems that are typically operated from a single- or dual-cell nickel-cadmium (NiCd), nickel-metal hydride (NiMH), or alkaline battery. The converter output voltage can be adjusted from 1.5 V to a maximum of 3.3 V and provides a minimum output current of 100 mA from a single battery cell and 250 mA from two battery cells. The converter starts up into a full load with a supply voltage of 0.9 V and stays in operation with supply voltages as low as 0.8 V.
The converter is based on a fixed-frequency, current-mode pulse-width-modulation (PWM) controller that goes into power-save mode at low load currents. The current through the switch is limited to a maximum of 1100 mA, depending on the output voltage. The current sense is integrated to further minimize external component count. The converter can be disabled to minimize battery drain when the system is put into standby.
A low-EMI mode is implemented to reduce interference and radiated electromagnetic energy that is caused by the ringing of the inductor when the inductor discharge-current decreases to zero. The device is packaged in the space-saving 10-pin MSOP package.
Documents
Technical documentation and resources