Technical Specifications
Parameters and characteristics for this part
| Specification | BQ24027DRCT |
|---|---|
| Battery Chemistry | Lithium Ion/Polymer |
| Battery Pack Voltage | 4.2 V |
| Charge Current - Max [Max] | 500 mA |
| Current - Charging | Constant - Programmable |
| Fault Protection | Over Temperature |
| Interface | USB |
| Mounting Type | Surface Mount |
| Number of Cells | 1 |
| Operating Temperature [Max] | 125 ¯C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 10-VFDFN Exposed Pad |
| Programmable Features | Current, Timer |
| Supplier Device Package | 10-VSON (3x3) |
| Voltage - Supply (Max) [Max] | 6.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Rochester Electronics | N/A | 1 | $ 1.87 | |
| 25 | $ 1.83 | |||
| 100 | $ 1.76 | |||
| 500 | $ 1.68 | |||
| 1000 | $ 1.59 | |||
BQ24027 Series
Dual input USB/AC Adpater 1-cell Li-ion battery charger w/charge enable & AC present, No Taper
| Part | Package / Case | Voltage - Supply (Max) [Max] | Programmable Features | Fault Protection | Charge Current - Max [Max] | Operating Temperature [Max] | Operating Temperature [Min] | Supplier Device Package | Mounting Type | Battery Chemistry | Number of Cells | Battery Pack Voltage | Interface | Current - Charging |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments BQ24027DRCT | 10-VFDFN Exposed Pad | 6.5 V | Current, Timer | Over Temperature | 500 mA | 125 ¯C | -40 °C | 10-VSON (3x3) | Surface Mount | Lithium Ion/Polymer | 1 | 4.2 V | USB | Constant - Programmable |
Description
General part information
BQ24027 Series
The bqTINY-II series are highly-integrated, flexible Li-Ion linear charge and system power management devices for space-limited charger applications. In a single monolithic device, the bqTINY-II offers integrated USB-port and ac-adapter supply management with autonomous power-source selection, power-FET and current-sensor interfaces, high-accuracy current and voltage regulation, charge status, and charge termination.
The bqTINY-II automatically selects the USB-port or the ac-adapter as the power source for the system. In the USB configuration, the host can select from two preset charge rates of 100 mA or 500 mA. In the ac-adapter configuration, an external resistor sets the system or charge current.
The bqTINY-II charges the battery in three phases: conditioning, constant current, and constant voltage. Charge is terminated based on minimum current. An internal charge timer provides a backup safety for charge termination. The bqTINY-II automatically restarts the charge if the battery voltage falls below an internal threshold. The bqTINY-II automatically enters sleep mode when both supplies are removed.