MAX207CDBR
ActiveTexas Instruments
5-V MULTICHANNEL 120KBPS RS-232 LINE DRIVER/RECEIVER WITH +/-9V OUTPUT & +/-15-KV ESD PROTECTION
Deep-Dive with AI
Search across all available documentation for this part.
DocumentsMAX207 datasheet (Rev. B)
MAX207CDBR
ActiveTexas Instruments
5-V MULTICHANNEL 120KBPS RS-232 LINE DRIVER/RECEIVER WITH +/-9V OUTPUT & +/-15-KV ESD PROTECTION
Deep-Dive with AI
DocumentsMAX207 datasheet (Rev. B)
Technical Specifications
Parameters and characteristics commom to parts in this series
| Specification | MAX207CDBR | MAX207 Series |
|---|---|---|
| Data Rate | 120 Kbps | 120 Kbps |
| Duplex | Full | Full |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Drivers/Receivers [custom] | 3 | 3 |
| Number of Drivers/Receivers [custom] | 5 | 5 |
| Operating Temperature [Max] | 70 ░C | 70 - 85 °C |
| Operating Temperature [Min] | 0 °C | -40 - 0 °C |
| Package / Case | 0.209 in | 0.209 in |
| Package / Case | 5.3 mm | 5.3 mm |
| Package / Case | 24-SSOP | 24-SOIC, 24-SSOP |
| Package / Case | - | 7.5 mm |
| Package / Case | - | 0.295 in |
| Protocol | RS232 | RS232 |
| Receiver Hysteresis | 500 mV | 500 mV |
| Supplier Device Package | 24-SSOP | 24-SOIC, 24-SSOP |
| Type | Transceiver | Transceiver |
| Voltage - Supply [Max] | 5.25 V | 5.25 V |
| Voltage - Supply [Min] | 4.75 V | 4.75 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
MAX207 Series
5-V multichannel 120kbps RS-232 line driver/receiver with +/-9V output & +/-15-kV ESD protection
| Part | Operating Temperature [Min] | Operating Temperature [Max] | Supplier Device Package | Number of Drivers/Receivers [custom] | Number of Drivers/Receivers [custom] | Voltage - Supply [Min] | Voltage - Supply [Max] | Receiver Hysteresis | Data Rate | Duplex | Protocol | Type | Mounting Type | Package / Case [y] | Package / Case [x] | Package / Case | Package / Case | Package / Case |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments MAX207IDWThe MAX207 consists of five line drivers, three line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate.
The MAX207 consists of five line drivers, three line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate. | -40 °C | 85 °C | 24-SOIC | 3 | 5 | 4.75 V | 5.25 V | 500 mV | 120 Kbps | Full | RS232 | Transceiver | Surface Mount | 7.5 mm | 0.295 in | 24-SOIC | ||
Texas Instruments MAX207CDWRThe MAX207 consists of five line drivers, three line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate.
The MAX207 consists of five line drivers, three line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate. | 0 °C | 70 ░C | 24-SOIC | 3 | 5 | 4.75 V | 5.25 V | 500 mV | 120 Kbps | Full | RS232 | Transceiver | Surface Mount | 7.5 mm | 0.295 in | 24-SOIC | ||
Texas Instruments MAX207IDWRThe MAX207 consists of five line drivers, three line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate.
The MAX207 consists of five line drivers, three line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate. | -40 °C | 85 °C | 24-SOIC | 3 | 5 | 4.75 V | 5.25 V | 500 mV | 120 Kbps | Full | RS232 | Transceiver | Surface Mount | 7.5 mm | 0.295 in | 24-SOIC | ||
Texas Instruments MAX207CDBRThe MAX207 consists of five line drivers, three line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate.
The MAX207 consists of five line drivers, three line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate. | 0 °C | 70 ░C | 24-SSOP | 3 | 5 | 4.75 V | 5.25 V | 500 mV | 120 Kbps | Full | RS232 | Transceiver | Surface Mount | 24-SSOP | 0.209 in | 5.3 mm | ||
-40 °C | 85 °C | 24-SSOP | 3 | 5 | 4.75 V | 5.25 V | 500 mV | 120 Kbps | Full | RS232 | Transceiver | Surface Mount | 24-SSOP | 0.209 in | 5.3 mm | |||
Texas Instruments MAX207CDBThe MAX207 consists of five line drivers, three line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate.
The MAX207 consists of five line drivers, three line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate. | 0 °C | 70 ░C | 24-SSOP | 3 | 5 | 4.75 V | 5.25 V | 500 mV | 120 Kbps | Full | RS232 | Transceiver | Surface Mount | 24-SSOP | 0.209 in | 5.3 mm | ||
Texas Instruments MAX207CDWThe MAX207 consists of five line drivers, three line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate.
The MAX207 consists of five line drivers, three line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate. | 0 °C | 70 ░C | 24-SOIC | 3 | 5 | 4.75 V | 5.25 V | 500 mV | 120 Kbps | Full | RS232 | Transceiver | Surface Mount | 7.5 mm | 0.295 in | 24-SOIC | ||
Texas Instruments MAX207IDBRThe MAX207 consists of five line drivers, three line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate.
The MAX207 consists of five line drivers, three line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate. | -40 °C | 85 °C | 24-SSOP | 3 | 5 | 4.75 V | 5.25 V | 500 mV | 120 Kbps | Full | RS232 | Transceiver | Surface Mount | 24-SSOP | 0.209 in | 5.3 mm |
Description
General part information
MAX207 Series
The MAX207 consists of five line drivers, three line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate.
The MAX207 consists of five line drivers, three line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate.
Documents
Technical documentation and resources