LP38842S-0.8/NOPB
ActiveTexas Instruments
1.5-A, LOW-VIN (0.915-V), ULTRA-LOW-DROPOUT VOLTAGE REGULATOR WITH ENABLE
Deep-Dive with AI
Search across all available documentation for this part.
LP38842S-0.8/NOPB
ActiveTexas Instruments
1.5-A, LOW-VIN (0.915-V), ULTRA-LOW-DROPOUT VOLTAGE REGULATOR WITH ENABLE
Technical Specifications
Parameters and characteristics commom to parts in this series
| Specification | LP38842S-0.8/NOPB | LP38842 Series |
|---|---|---|
| Board Type | - | Fully Populated |
| Channels per IC | - | 1 |
| Control Features | Enable | Enable |
| Current - Output | 1.5 A | 1.5 A |
| Current - Quiescent (Iq) | 30 µA | 30 µA |
| Current - Supply (Max) [Max] | 40 mA | 40 mA |
| Mounting Type | Surface Mount | Surface Mount, Through Hole |
| Number of Regulators | 1 | 1 |
| Operating Temperature [Max] | 125 °C | 125 °C |
| Operating Temperature [Min] | -40 °C | -40 °C |
| Output Configuration | Positive | Positive |
| Output Type | 27.03 °C/W | 27.03 °C/W |
| Output Type | - | Adjustable |
| Package / Case | TO-263BA, D2PAK (5 Leads + Tab), TO-263-6 | TO-263BA, D2PAK (5 Leads + Tab), TO-263-6, 8-PowerSOIC, TO-220-5 |
| Package / Case | - | 3.9 mm |
| Package / Case | - | 0.154 in |
| Protection Features | Over Current, Short Circuit, Over Temperature | Under Voltage Lockout (UVLO), Over Current, Over Temperature, Short Circuit |
| PSRR [Max] | 80 dB | 80 dB |
| PSRR [Min] | 58 dB | 58 - 65 dB |
| Regulator Type | - | Positive Adjustable |
| Supplied Contents | - | Board(s) |
| Supplier Device Package | TO-263 (DDPAK-5) | TO-263 (DDPAK-5), 8-SO PowerPad, TO-220-5 |
| Utilized IC / Part | - | LP38842 |
| Voltage - Input | - | 5.5 V |
| Voltage - Input | - | 4.5 V |
| Voltage - Input (Max) [Max] | 5.5 V | 5.5 V |
| Voltage - Output | - | 1.2 V |
| Voltage - Output (Max) | - | 1.5 V |
| Voltage - Output (Min/Fixed) | 0.8 V | 0.56 - 1.5 V |
| Voltage Dropout (Max) | - | 0.115 V |
| Voltage Dropout (Max) [Max] | 0.315 V | 0.315 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
LP38842 Series
1.5-A, low-VIN (0.915-V), ultra-low-dropout voltage regulator with enable
| Part | Package / Case | Voltage - Input (Max) [Max] | Output Type | Number of Regulators | Current - Quiescent (Iq) | PSRR [Max] | PSRR [Min] | Output Configuration | Current - Supply (Max) [Max] | Control Features | Current - Output | Protection Features | Mounting Type | Supplier Device Package | Operating Temperature [Max] | Operating Temperature [Min] | Voltage - Output (Min/Fixed) | Voltage Dropout (Max) [Max] | Voltage - Output (Max) [Max] | Output Type | Voltage Dropout (Max) | Package / Case [custom] | Package / Case [custom] | Board Type | Channels per IC | Voltage - Output | Utilized IC / Part | Supplied Contents | Voltage - Input [Max] | Voltage - Input [Min] | Regulator Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments LP38842SX-1.5/NOPBThe LP38842 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and DDPAK/TO-263 packages.
Dropout Voltage:115 mV (typ) at 1.5A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) whenS/Dpin is low.
Precision Output Voltage:1.5% room temperature accuracy.
The LP38842 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and DDPAK/TO-263 packages.
Dropout Voltage:115 mV (typ) at 1.5A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) whenS/Dpin is low.
Precision Output Voltage:1.5% room temperature accuracy. | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | 5.5 V | 27.03 °C/W | 1 | 30 µA | 80 dB | 65 dB | Positive | 40 mA | Enable | 1.5 A | Over Current, Over Temperature, Under Voltage Lockout (UVLO) | Surface Mount | TO-263 (DDPAK-5) | 125 °C | -40 °C | 1.5 V | 0.315 V | |||||||||||||
Texas Instruments LP38842MRX-ADJLinear Voltage Regulator IC Positive Adjustable 1 Output 1.5A 8-SO PowerPad | 8-PowerSOIC | 5.5 V | 1 | 30 µA | 80 dB | 58 dB | Positive | 40 mA | Enable | 1.5 A | Over Current, Over Temperature, Short Circuit | Surface Mount | 8-SO PowerPad | 125 °C | -40 °C | 0.56 V | 1.5 V | Adjustable | 0.115 V | 3.9 mm | 0.154 in | ||||||||||
TO-220-5 | 5.5 V | 27.03 °C/W | 1 | 30 µA | 80 dB | 58 dB | Positive | 40 mA | Enable | 1.5 A | Over Current, Over Temperature, Short Circuit | Through Hole | TO-220-5 | 125 °C | -40 °C | 0.8 V | 0.315 V | ||||||||||||||
Texas Instruments LP38842SX-1.2Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A TO-263 (DDPAK-5) | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | 5.5 V | 27.03 °C/W | 1 | 30 µA | 80 dB | 65 dB | Positive | 40 mA | Enable | 1.5 A | Over Current, Over Temperature, Short Circuit | Surface Mount | TO-263 (DDPAK-5) | 125 °C | -40 °C | 1.2 V | 0.315 V | |||||||||||||
Texas Instruments LP38842MRX-ADJ/NOPBThe LP38842-ADJ is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in the SO PowerPAD package.
Dropout Voltage:115 mV (typ) at 1.5A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) when S/D pin is low.
Precision Reference Voltage:1.5% room temperature accuracy.
The LP38842-ADJ is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in the SO PowerPAD package.
Dropout Voltage:115 mV (typ) at 1.5A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) when S/D pin is low.
Precision Reference Voltage:1.5% room temperature accuracy. | 8-PowerSOIC | 5.5 V | 1 | 30 µA | 80 dB | 58 dB | Positive | 40 mA | Enable | 1.5 A | Over Current, Over Temperature, Short Circuit | Surface Mount | 8-SO PowerPad | 125 °C | -40 °C | 0.56 V | 1.5 V | Adjustable | 0.115 V | 3.9 mm | 0.154 in | ||||||||||
Texas Instruments LP38842T-1.2/NOPBThe LP38842 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and DDPAK/TO-263 packages.
Dropout Voltage:115 mV (typ) at 1.5A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) whenS/Dpin is low.
Precision Output Voltage:1.5% room temperature accuracy.
The LP38842 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and DDPAK/TO-263 packages.
Dropout Voltage:115 mV (typ) at 1.5A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) whenS/Dpin is low.
Precision Output Voltage:1.5% room temperature accuracy. | TO-220-5 | 5.5 V | 27.03 °C/W | 1 | 30 µA | 80 dB | 65 dB | Positive | 40 mA | Enable | 1.5 A | Over Current, Over Temperature, Short Circuit | Through Hole | TO-220-5 | 125 °C | -40 °C | 1.2 V | 0.315 V | |||||||||||||
Texas Instruments LP38842S-1.5/NOPBThe LP38842 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and DDPAK/TO-263 packages.
Dropout Voltage:115 mV (typ) at 1.5A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) whenS/Dpin is low.
Precision Output Voltage:1.5% room temperature accuracy.
The LP38842 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and DDPAK/TO-263 packages.
Dropout Voltage:115 mV (typ) at 1.5A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) whenS/Dpin is low.
Precision Output Voltage:1.5% room temperature accuracy. | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | 5.5 V | 27.03 °C/W | 1 | 30 µA | 80 dB | 65 dB | Positive | 40 mA | Enable | 1.5 A | Over Current, Over Temperature, Under Voltage Lockout (UVLO) | Surface Mount | TO-263 (DDPAK-5) | 125 °C | -40 °C | 1.5 V | 0.315 V | |||||||||||||
Texas Instruments LP38842S-1.2/NOPBThe LP38842 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and DDPAK/TO-263 packages.
Dropout Voltage:115 mV (typ) at 1.5A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) whenS/Dpin is low.
Precision Output Voltage:1.5% room temperature accuracy.
The LP38842 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and DDPAK/TO-263 packages.
Dropout Voltage:115 mV (typ) at 1.5A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) whenS/Dpin is low.
Precision Output Voltage:1.5% room temperature accuracy. | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | 5.5 V | 27.03 °C/W | 1 | 30 µA | 80 dB | 65 dB | Positive | 40 mA | Enable | 1.5 A | Over Current, Over Temperature, Short Circuit | Surface Mount | TO-263 (DDPAK-5) | 125 °C | -40 °C | 1.2 V | 0.315 V | |||||||||||||
Texas Instruments LP38842S-1.5Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A TO-263 (DDPAK-5) | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | 5.5 V | 27.03 °C/W | 1 | 30 µA | 80 dB | 65 dB | Positive | 40 mA | Enable | 1.5 A | Over Current, Over Temperature, Under Voltage Lockout (UVLO) | Surface Mount | TO-263 (DDPAK-5) | 125 °C | -40 °C | 1.5 V | 0.315 V | |||||||||||||
TO-220-5 | 5.5 V | 27.03 °C/W | 1 | 30 µA | 80 dB | 65 dB | Positive | 40 mA | Enable | 1.5 A | Over Current, Over Temperature, Short Circuit | Through Hole | TO-220-5 | 125 °C | -40 °C | 1.2 V | 0.315 V | ||||||||||||||
Texas Instruments LP38842T-1.5/NOPBThe LP38842 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and DDPAK/TO-263 packages.
Dropout Voltage:115 mV (typ) at 1.5A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) whenS/Dpin is low.
Precision Output Voltage:1.5% room temperature accuracy.
The LP38842 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and DDPAK/TO-263 packages.
Dropout Voltage:115 mV (typ) at 1.5A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) whenS/Dpin is low.
Precision Output Voltage:1.5% room temperature accuracy. | TO-220-5 | 5.5 V | 27.03 °C/W | 1 | 30 µA | 80 dB | 65 dB | Positive | 40 mA | Enable | 1.5 A | Over Current, Over Temperature, Under Voltage Lockout (UVLO) | Through Hole | TO-220-5 | 125 °C | -40 °C | 1.5 V | 0.315 V | |||||||||||||
Texas Instruments LP38842S-0.8/NOPBThe LP38842 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and DDPAK/TO-263 packages.
Dropout Voltage:115 mV (typ) at 1.5A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) whenS/Dpin is low.
Precision Output Voltage:1.5% room temperature accuracy.
The LP38842 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and DDPAK/TO-263 packages.
Dropout Voltage:115 mV (typ) at 1.5A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) whenS/Dpin is low.
Precision Output Voltage:1.5% room temperature accuracy. | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | 5.5 V | 27.03 °C/W | 1 | 30 µA | 80 dB | 58 dB | Positive | 40 mA | Enable | 1.5 A | Over Current, Over Temperature, Short Circuit | Surface Mount | TO-263 (DDPAK-5) | 125 °C | -40 °C | 0.8 V | 0.315 V | |||||||||||||
Texas Instruments LP38842MR-ADJ/NOPBThe LP38842-ADJ is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in the SO PowerPAD package.
Dropout Voltage:115 mV (typ) at 1.5A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) when S/D pin is low.
Precision Reference Voltage:1.5% room temperature accuracy.
The LP38842-ADJ is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in the SO PowerPAD package.
Dropout Voltage:115 mV (typ) at 1.5A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) when S/D pin is low.
Precision Reference Voltage:1.5% room temperature accuracy. | 8-PowerSOIC | 5.5 V | 1 | 30 µA | 80 dB | 58 dB | Positive | 40 mA | Enable | 1.5 A | Over Current, Over Temperature, Short Circuit | Surface Mount | 8-SO PowerPad | 125 °C | -40 °C | 0.56 V | 1.5 V | Adjustable | 0.115 V | 3.9 mm | 0.154 in | ||||||||||
Texas Instruments LP38842S-0.8Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A TO-263 (DDPAK-5) | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | 5.5 V | 27.03 °C/W | 1 | 30 µA | 80 dB | 58 dB | Positive | 40 mA | Enable | 1.5 A | Over Current, Over Temperature, Short Circuit | Surface Mount | TO-263 (DDPAK-5) | 125 °C | -40 °C | 0.8 V | 0.315 V | |||||||||||||
Texas Instruments LP38842S-1.2Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A TO-263 (DDPAK-5) | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | 5.5 V | 27.03 °C/W | 1 | 30 µA | 80 dB | 65 dB | Positive | 40 mA | Enable | 1.5 A | Over Current, Over Temperature, Short Circuit | Surface Mount | TO-263 (DDPAK-5) | 125 °C | -40 °C | 1.2 V | 0.315 V | |||||||||||||
Texas Instruments LP38842MR-ADJLinear Voltage Regulator IC Positive Adjustable 1 Output 1.5A 8-SO PowerPad | 8-PowerSOIC | 5.5 V | 1 | 30 µA | 80 dB | 58 dB | Positive | 40 mA | Enable | 1.5 A | Over Current, Over Temperature, Short Circuit | Surface Mount | 8-SO PowerPad | 125 °C | -40 °C | 0.56 V | 1.5 V | Adjustable | 0.115 V | 3.9 mm | 0.154 in | ||||||||||
Texas Instruments LP38842EVALLP38842 1 - Single Channels per IC Positive Adjustable Linear Voltage Regulator Evaluation Board | 1.5 A | Fully Populated | 1 | 1.2 V | LP38842 | Board(s) | 5.5 V | 4.5 V | Positive Adjustable | ||||||||||||||||||||||
Texas Instruments LP38842SX-0.8/NOPBLinear Voltage Regulator IC Positive Fixed 1 Output 1.5A TO-263 (DDPAK-5) | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | 5.5 V | 27.03 °C/W | 1 | 30 µA | 80 dB | 58 dB | Positive | 40 mA | Enable | 1.5 A | Over Current, Over Temperature, Short Circuit | Surface Mount | TO-263 (DDPAK-5) | 125 °C | -40 °C | 0.8 V | 0.315 V |
Description
General part information
LP38842 Series
The LP38842 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and DDPAK/TO-263 packages.
Dropout Voltage:115 mV (typ) at 1.5A load current.
Documents
Technical documentation and resources