TPS2817DBVT

Active

Texas Instruments

2-A/2-A SINGLE-CHANNEL GATE DRIVER WITH 40-V VDD AND ACTIVE PULLUP INPUT

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsSingle-Channel High-Speed Mosfet Drivers datasheet (Rev. C)

TPS2817DBVT

Active

Texas Instruments

2-A/2-A SINGLE-CHANNEL GATE DRIVER WITH 40-V VDD AND ACTIVE PULLUP INPUT

Deep-Dive with AI

DocumentsSingle-Channel High-Speed Mosfet Drivers datasheet (Rev. C)

Specifications Pricing Series Description Documents

Technical Specifications

Parameters and characteristics commom to parts in this series

Specification	TPS2817DBVT	TPS2817 Series

Channel Type	Single	Single
Current - Peak Output (Source, Sink) [custom]	2 A	2 A
Current - Peak Output (Source, Sink) [custom]	2 A	2 A
Driven Configuration	Low-Side	Low-Side
Gate Type	N-Channel MOSFET	N-Channel MOSFET
Input Type	Non-Inverting	Non-Inverting
Logic Voltage - VIL, VIH [custom]	1 V	1 V
Logic Voltage - VIL, VIH [custom]	4 V	4 V
Mounting Type	Surface Mount	Surface Mount
Number of Drivers	1	1
Operating Temperature [Max]	125 °C	125 °C
Operating Temperature [Min]	-40 °C	-40 °C
Package / Case	SOT-753, SC-74A	SOT-753, SC-74A
Rise / Fall Time (Typ) [custom]	14 ns	14 ns
Rise / Fall Time (Typ) [custom]	14 ns	14 ns
Supplier Device Package	SOT-23-5	SOT-23-5
Voltage - Supply [Max]	14 V	14 V
Voltage - Supply [Min]	4 V	4 V

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Cut Tape (CT)	1	$ 2.47
		10	$ 2.22
		25	$ 2.09
		100	$ 1.78
	Digi-Reel®	1	$ 2.47
		10	$ 2.22
		25	$ 2.09
		100	$ 1.78
	Tape & Reel (TR)	250	$ 1.67
		500	$ 1.46
		1250	$ 1.21
		2500	$ 1.13
		6250	$ 1.09
Texas Instruments	SMALL T&R	1	$ 2.08
		100	$ 1.72
		250	$ 1.24
		1000	$ 0.93

TPS2817 Series

2-A/2-A single-channel gate driver with 40-V VDD and active pullup input

Part	Driven Configuration	Package / Case	Number of Drivers	Operating Temperature [Min]	Operating Temperature [Max]	Current - Peak Output (Source, Sink) [custom]	Current - Peak Output (Source, Sink) [custom]	Rise / Fall Time (Typ) [custom]	Rise / Fall Time (Typ) [custom]	Logic Voltage - VIL, VIH [custom]	Logic Voltage - VIL, VIH [custom]	Supplier Device Package	Channel Type	Input Type	Mounting Type	Gate Type	Voltage - Supply [Max]	Voltage - Supply [Min]
Texas Instruments TPS2817DBVR The TPS28xx single-channel high-speed MOSFET drivers are capable of delivering peak currents of up to 2 A into highly capacitive loads. High switching speeds (trand tf= 14 ns typ) are obtained with the use of BiCMOS outputs. Typical threshold switching voltages are 2/3 and 1/3 of VCC. The design inherently minimizes shoot-through current. A regulator is provided on TPS2816 through TPS2819 devices to allow operation with supply inputs between 14 V and 40 V. The regulator output can be used to power other circuits, provided power dissipation does not exceed package limitations. If the regulator is not required, VDD(the regulator input) should be connected to VCC. The TPS2816 and TPS2817 input circuits include an active pullup circuit to eliminate the need for an external resistor when using open-collector PWM controllers. The TPS2818 and TPS2819 are identical to the TPS2816 and TPS2817, except that the active pullup circuit is omitted. The TPS2828 and TPS2829 are identical to the TPS2818 and TPS2819, except that the internal voltage regulator is omitted, allowing quiescent current to drop to less than 15 uA when the inputs are high or low. The TPS28xx series devices are available in 5-pin SOT-23 (DBV) packages and operate over an ambient temperature range of –40°C to 125°C. The TPS28xx single-channel high-speed MOSFET drivers are capable of delivering peak currents of up to 2 A into highly capacitive loads. High switching speeds (trand tf= 14 ns typ) are obtained with the use of BiCMOS outputs. Typical threshold switching voltages are 2/3 and 1/3 of VCC. The design inherently minimizes shoot-through current. A regulator is provided on TPS2816 through TPS2819 devices to allow operation with supply inputs between 14 V and 40 V. The regulator output can be used to power other circuits, provided power dissipation does not exceed package limitations. If the regulator is not required, VDD(the regulator input) should be connected to VCC. The TPS2816 and TPS2817 input circuits include an active pullup circuit to eliminate the need for an external resistor when using open-collector PWM controllers. The TPS2818 and TPS2819 are identical to the TPS2816 and TPS2817, except that the active pullup circuit is omitted. The TPS2828 and TPS2829 are identical to the TPS2818 and TPS2819, except that the internal voltage regulator is omitted, allowing quiescent current to drop to less than 15 uA when the inputs are high or low. The TPS28xx series devices are available in 5-pin SOT-23 (DBV) packages and operate over an ambient temperature range of –40°C to 125°C.	Low-Side	SC-74A, SOT-753	1	-40 °C	125 °C	2 A	2 A	14 ns	14 ns	1 V	4 V	SOT-23-5	Single	Non-Inverting	Surface Mount	N-Channel MOSFET	14 V	4 V
Texas Instruments TPS2817DBVT The TPS28xx single-channel high-speed MOSFET drivers are capable of delivering peak currents of up to 2 A into highly capacitive loads. High switching speeds (trand tf= 14 ns typ) are obtained with the use of BiCMOS outputs. Typical threshold switching voltages are 2/3 and 1/3 of VCC. The design inherently minimizes shoot-through current. A regulator is provided on TPS2816 through TPS2819 devices to allow operation with supply inputs between 14 V and 40 V. The regulator output can be used to power other circuits, provided power dissipation does not exceed package limitations. If the regulator is not required, VDD(the regulator input) should be connected to VCC. The TPS2816 and TPS2817 input circuits include an active pullup circuit to eliminate the need for an external resistor when using open-collector PWM controllers. The TPS2818 and TPS2819 are identical to the TPS2816 and TPS2817, except that the active pullup circuit is omitted. The TPS2828 and TPS2829 are identical to the TPS2818 and TPS2819, except that the internal voltage regulator is omitted, allowing quiescent current to drop to less than 15 uA when the inputs are high or low. The TPS28xx series devices are available in 5-pin SOT-23 (DBV) packages and operate over an ambient temperature range of –40°C to 125°C. The TPS28xx single-channel high-speed MOSFET drivers are capable of delivering peak currents of up to 2 A into highly capacitive loads. High switching speeds (trand tf= 14 ns typ) are obtained with the use of BiCMOS outputs. Typical threshold switching voltages are 2/3 and 1/3 of VCC. The design inherently minimizes shoot-through current. A regulator is provided on TPS2816 through TPS2819 devices to allow operation with supply inputs between 14 V and 40 V. The regulator output can be used to power other circuits, provided power dissipation does not exceed package limitations. If the regulator is not required, VDD(the regulator input) should be connected to VCC. The TPS2816 and TPS2817 input circuits include an active pullup circuit to eliminate the need for an external resistor when using open-collector PWM controllers. The TPS2818 and TPS2819 are identical to the TPS2816 and TPS2817, except that the active pullup circuit is omitted. The TPS2828 and TPS2829 are identical to the TPS2818 and TPS2819, except that the internal voltage regulator is omitted, allowing quiescent current to drop to less than 15 uA when the inputs are high or low. The TPS28xx series devices are available in 5-pin SOT-23 (DBV) packages and operate over an ambient temperature range of –40°C to 125°C.	Low-Side	SC-74A, SOT-753	1	-40 °C	125 °C	2 A	2 A	14 ns	14 ns	1 V	4 V	SOT-23-5	Single	Non-Inverting	Surface Mount	N-Channel MOSFET	14 V	4 V

Description

General part information

TPS2817 Series

The TPS28xx single-channel high-speed MOSFET drivers are capable of delivering peak currents of up to 2 A into highly capacitive loads. High switching speeds (trand tf= 14 ns typ) are obtained with the use of BiCMOS outputs. Typical threshold switching voltages are 2/3 and 1/3 of VCC. The design inherently minimizes shoot-through current.

A regulator is provided on TPS2816 through TPS2819 devices to allow operation with supply inputs between 14 V and 40 V. The regulator output can be used to power other circuits, provided power dissipation does not exceed package limitations. If the regulator is not required, VDD(the regulator input) should be connected to VCC. The TPS2816 and TPS2817 input circuits include an active pullup circuit to eliminate the need for an external resistor when using open-collector PWM controllers. The TPS2818 and TPS2819 are identical to the TPS2816 and TPS2817, except that the active pullup circuit is omitted. The TPS2828 and TPS2829 are identical to the TPS2818 and TPS2819, except that the internal voltage regulator is omitted, allowing quiescent current to drop to less than 15 uA when the inputs are high or low.

The TPS28xx series devices are available in 5-pin SOT-23 (DBV) packages and operate over an ambient temperature range of –40°C to 125°C.

Documents

Technical documentation and resources

Single-Channel High-Speed Mosfet Drivers datasheet (Rev. C)

Data sheet