Development Boards, Kits, Programmers

LMC6035IBPCONV

Obsolete

Texas Instruments

BOARD EVALUATION LMC6035IBP

Development Boards, Kits, Programmers

LMC6035IBPCONV

Obsolete

Texas Instruments

BOARD EVALUATION LMC6035IBP

Specifications Series Pricing CAD Description Documents

Technical Specifications

Parameters and characteristics for this part

Specification	LMC6035IBPCONV

Amplifier Type	General Purpose, Standard (General Purpose)
Board Type	Bare (Unpopulated)
Channels per IC (Count)	2
Channels per IC (Dual)	2
Channels per IC (Type)	Dual
Contents	Unpopulated (Bare) Board
Output Type	Single-Ended
Supplied Contents	Board(s)
Utilized IC / Part	LMC6035IBP

LMC6035 Series

Dual, 15.5-V, 1.4-MHz operational amplifier

Part	Package Name	Current - Output / Channel	Output Type	Slew Rate	Gain Bandwidth Product	Mounting Type	Operating Temperature (Min)	Operating Temperature (Max)	Current - Supply	Voltage - Supply Span (Min)	Voltage - Supply Span (Max)	Number of Circuits	Current - Input Bias	Package Width	Package Length	Amplifier Type	Voltage - Input Offset	Package / Case	Supplied Contents	Board Type	Utilized IC / Part	Contents	Channels per IC (Dual)	Channels per IC (Type)	Channels per IC (Count)	Qualification	Grade
Texas Instruments LMC6035IMMX	8-TSSOP 8-MSOP 8-VSSOP	8 mA	Differential Rail-to-Rail	1.5 V/µs	1.4 MHz	Surface Mount	-40 °C	85 °C	650 µA	2 V	15.5 V	2	0.02 pA	3 mm	0.118 in	CMOS	500 µV
Texas Instruments LMC6035IMX/NOPB	8-SOIC	8 mA	Differential Rail-to-Rail	1.5 V/µs	1.4 MHz	Surface Mount	-40 °C	85 °C	650 µA	2 V	15.5 V	2	0.02 pA	3.9 mm	0.154 in	CMOS	500 µV
Texas Instruments LMC6035ITLX/NOPB	8-DSBGA	8 mA	Differential Rail-to-Rail	1.5 V/µs	1.4 MHz	Surface Mount	-40 °C	85 °C	650 µA	2 V	15.5 V	2	0.02 pA	1.56 mm	1.56 mm	CMOS	500 µV	8-WFBGA DSBGA
Texas Instruments LMC6035IBPCONV			Single-Ended													General Purpose Standard (General Purpose)			Board(s)	Bare (Unpopulated)	LMC6035IBP	Unpopulated (Bare) Board	2	Dual	2
Texas Instruments LMC6035IMXQ1	8-SOIC	8 mA	Differential Rail-to-Rail	1.5 V/µs	1.4 MHz	Surface Mount	-40 °C	85 °C	650 µA	2 V	15.5 V	2	0.02 pA	3.9 mm	0.154 in	CMOS	500 µV									AEC-Q100	Automotive
Texas Instruments LMC6035IM	8-SOIC	8 mA	Differential Rail-to-Rail	1.5 V/µs	1.4 MHz	Surface Mount	-40 °C	85 °C	650 µA	2 V	15.5 V	2	0.02 pA	3.9 mm	0.154 in	CMOS	500 µV
Texas Instruments LMC6035IMM	8-TSSOP 8-MSOP 8-VSSOP	8 mA	Differential Rail-to-Rail	1.5 V/µs	1.4 MHz	Surface Mount	-40 °C	85 °C	650 µA	2 V	15.5 V	2	0.02 pA	3 mm	0.118 in	CMOS	500 µV
Texas Instruments LMC6035IBP	8-DSBGA	8 mA	Differential Rail-to-Rail	1.5 V/µs	1.4 MHz	Surface Mount	-40 °C	85 °C	650 µA	2 V	15.5 V	2	0.02 pA			CMOS	500 µV	8-VFBGA
Texas Instruments LMC6035IMMX/NOPB	8-TSSOP 8-MSOP 8-VSSOP	8 mA	Differential Rail-to-Rail	1.5 V/µs	1.4 MHz	Surface Mount	-40 °C	85 °C	650 µA	2 V	15.5 V	2	0.02 pA	3 mm	0.118 in	CMOS	500 µV
Texas Instruments LMC6035IBPX	8-DSBGA	8 mA	Differential Rail-to-Rail	1.5 V/µs	1.4 MHz	Surface Mount	-40 °C	85 °C	650 µA	2 V	15.5 V	2	0.02 pA			CMOS	500 µV	8-VFBGA

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$	Updated

Digikey	Box	1	$ 11.97	<6d

CAD

3D models and CAD resources for this part

Description

General part information

LMC6035 Series

The LMC6035-Q1 is an economical, low-voltage op amp capable of rail-to-rail output swing into loads of 600Ω. These devices also feature a well behaved decrease in specifications at supply voltages less than the specified 2.7V operation. This decrease provides a comfort zone for adequate operation at voltages significantly less than 2.7V. The ultra low input current (IB) makes this device and excellent choice for low-power, active-filter applications because a low IB allows the use of higher resistor values and lower capacitor values. In addition, the drive capability of the LMC6035-Q1 makes this op amp an excellent choice in a broad range of applications for low-voltage systems.

Documents

Technical documentation and resources

LMC6035IBPCONV | Datasheet