Technical Specifications
Parameters and characteristics commom to parts in this series
| Specification | LP3892ET-1.2/NOPB | LP3892 Series |
|---|---|---|
| Control Features | Enable | Enable |
| Current - Output | 1.5 A | 1.5 A |
| Current - Quiescent (Iq) | 30 µA | 30 µA |
| Current - Supply (Max) [Max] | 8 mA | 8 mA |
| Mounting Type | Through Hole | Surface Mount, Through Hole |
| Number of Regulators | 1 | 1 |
| Operating Temperature [Max] | 125 °C | 125 °C |
| Operating Temperature [Min] | -40 °C | -40 °C |
| Output Configuration | Positive | Positive |
| Output Type | 27.03 °C/W | 27.03 °C/W |
| Package / Case | TO-220-5 Formed Leads | 8-PowerSOIC, TO-263BA, D2PAK (5 Leads + Tab), TO-263-6, TO-220-5 Formed Leads |
| Package / Case | - | 3.9 mm |
| Package / Case | - | 0.154 in |
| Protection Features | Over Current, Short Circuit, Over Temperature | Over Current, Short Circuit, Over Temperature, Under Voltage Lockout (UVLO) |
| PSRR [Max] | 80 dB | 80 dB |
| PSRR [Min] | 65 dB | 65 dB |
| Supplier Device Package | TO-220-5 | 8-SO PowerPad, TO-263 (DDPAK-5), TO-220-5 |
| Voltage - Input (Max) [Max] | 5.5 V | 5.5 V |
| Voltage - Output (Min/Fixed) | 1.2 V | 1.2 - 1.8 V |
| Voltage Dropout (Max) | 0.5 V | 0.5 - 0.55 V |
| Voltage Dropout (Max) | - | 0.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
LP3892 Series
1.5-A, ULTRA-LOW-DROPOUT VOLTAGE REGULATOR WITH ENABLE
| Part | Output Configuration | Control Features | Voltage - Input (Max) [Max] | Current - Quiescent (Iq) | Current - Supply (Max) [Max] | PSRR [Max] | PSRR [Min] | Number of Regulators | Operating Temperature [Max] | Operating Temperature [Min] | Voltage Dropout (Max) | Mounting Type | Output Type | Voltage - Output (Min/Fixed) | Supplier Device Package | Current - Output | Package / Case [custom] | Package / Case | Package / Case [custom] | Protection Features | Voltage Dropout (Max) [Max] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments LP3892EMRX-1.2/NOPBThe LP3892 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220, DDPAK/TO-263 and SO PowerPAD-8 packages.
Dropout Voltage:140mV (typ) at 1.5A load current.
Ground Pin Current:3 mA (typ) at full load.
Shutdown Current:60 nA (typ) when S/D pin is low.
Precision Output Voltage:1.5% room temperature accuracy.
The LP3892 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220, DDPAK/TO-263 and SO PowerPAD-8 packages.
Dropout Voltage:140mV (typ) at 1.5A load current.
Ground Pin Current:3 mA (typ) at full load.
Shutdown Current:60 nA (typ) when S/D pin is low.
Precision Output Voltage:1.5% room temperature accuracy. | Positive | Enable | 5.5 V | 30 µA | 8 mA | 80 dB | 65 dB | 1 | 125 °C | -40 °C | 0.55 V | Surface Mount | 27.03 °C/W | 1.2 V | 8-SO PowerPad | 1.5 A | 3.9 mm | 8-PowerSOIC | 0.154 in | Over Current, Over Temperature, Short Circuit | |
Texas Instruments LP3892EMR-1.5Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A 8-SO PowerPad | Positive | Enable | 5.5 V | 30 µA | 8 mA | 80 dB | 65 dB | 1 | 125 °C | -40 °C | 0.55 V | Surface Mount | 27.03 °C/W | 1.5 V | 8-SO PowerPad | 1.5 A | 3.9 mm | 8-PowerSOIC | 0.154 in | Over Current, Over Temperature, Under Voltage Lockout (UVLO) | |
Texas Instruments LP3892ES-1.2Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A TO-263 (DDPAK-5) | Positive | Enable | 5.5 V | 30 µA | 8 mA | 80 dB | 65 dB | 1 | 125 °C | -40 °C | 0.5 V | Surface Mount | 27.03 °C/W | 1.2 V | TO-263 (DDPAK-5) | 1.5 A | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | Over Current, Over Temperature, Short Circuit | |||
Texas Instruments LP3892ESX-1.5Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A TO-263 (DDPAK-5) | Positive | Enable | 5.5 V | 30 µA | 8 mA | 80 dB | 65 dB | 1 | 125 °C | -40 °C | Surface Mount | 27.03 °C/W | 1.5 V | TO-263 (DDPAK-5) | 1.5 A | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | Over Current, Over Temperature, Under Voltage Lockout (UVLO) | 0.5 V | |||
Texas Instruments LP3892ES-1.8/NOPBLinear Voltage Regulator IC Positive Fixed 1 Output 1.5A TO-263 (DDPAK-5) | Positive | Enable | 5.5 V | 30 µA | 8 mA | 80 dB | 65 dB | 1 | 125 °C | -40 °C | 0.5 V | Surface Mount | 27.03 °C/W | 1.8 V | TO-263 (DDPAK-5) | 1.5 A | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | Over Current, Over Temperature, Short Circuit | |||
Texas Instruments LP3892EMR-1.8Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A 8-SO PowerPad | Positive | Enable | 5.5 V | 30 µA | 8 mA | 80 dB | 65 dB | 1 | 125 °C | -40 °C | 0.55 V | Surface Mount | 27.03 °C/W | 1.8 V | 8-SO PowerPad | 1.5 A | 3.9 mm | 8-PowerSOIC | 0.154 in | Over Current, Over Temperature, Short Circuit | |
Texas Instruments LP3892EMRX-1.5/NOPBThe LP3892 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220, DDPAK/TO-263 and SO PowerPAD-8 packages.
Dropout Voltage:140mV (typ) at 1.5A load current.
Ground Pin Current:3 mA (typ) at full load.
Shutdown Current:60 nA (typ) when S/D pin is low.
Precision Output Voltage:1.5% room temperature accuracy.
The LP3892 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220, DDPAK/TO-263 and SO PowerPAD-8 packages.
Dropout Voltage:140mV (typ) at 1.5A load current.
Ground Pin Current:3 mA (typ) at full load.
Shutdown Current:60 nA (typ) when S/D pin is low.
Precision Output Voltage:1.5% room temperature accuracy. | Positive | Enable | 5.5 V | 30 µA | 8 mA | 80 dB | 65 dB | 1 | 125 °C | -40 °C | 0.55 V | Surface Mount | 27.03 °C/W | 1.5 V | 8-SO PowerPad | 1.5 A | 3.9 mm | 8-PowerSOIC | 0.154 in | Over Current, Over Temperature, Under Voltage Lockout (UVLO) | |
Texas Instruments LP3892EMR-1.8/NOPBThe LP3892 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220, DDPAK/TO-263 and SO PowerPAD-8 packages.
Dropout Voltage:140mV (typ) at 1.5A load current.
Ground Pin Current:3 mA (typ) at full load.
Shutdown Current:60 nA (typ) when S/D pin is low.
Precision Output Voltage:1.5% room temperature accuracy.
The LP3892 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220, DDPAK/TO-263 and SO PowerPAD-8 packages.
Dropout Voltage:140mV (typ) at 1.5A load current.
Ground Pin Current:3 mA (typ) at full load.
Shutdown Current:60 nA (typ) when S/D pin is low.
Precision Output Voltage:1.5% room temperature accuracy. | Positive | Enable | 5.5 V | 30 µA | 8 mA | 80 dB | 65 dB | 1 | 125 °C | -40 °C | 0.55 V | Surface Mount | 27.03 °C/W | 1.8 V | 8-SO PowerPad | 1.5 A | 3.9 mm | 8-PowerSOIC | 0.154 in | Over Current, Over Temperature, Short Circuit | |
Texas Instruments LP3892EMR-1.5/NOPBThe LP3892 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220, DDPAK/TO-263 and SO PowerPAD-8 packages.
Dropout Voltage:140mV (typ) at 1.5A load current.
Ground Pin Current:3 mA (typ) at full load.
Shutdown Current:60 nA (typ) when S/D pin is low.
Precision Output Voltage:1.5% room temperature accuracy.
The LP3892 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220, DDPAK/TO-263 and SO PowerPAD-8 packages.
Dropout Voltage:140mV (typ) at 1.5A load current.
Ground Pin Current:3 mA (typ) at full load.
Shutdown Current:60 nA (typ) when S/D pin is low.
Precision Output Voltage:1.5% room temperature accuracy. | Positive | Enable | 5.5 V | 30 µA | 8 mA | 80 dB | 65 dB | 1 | 125 °C | -40 °C | 0.55 V | Surface Mount | 27.03 °C/W | 1.5 V | 8-SO PowerPad | 1.5 A | 3.9 mm | 8-PowerSOIC | 0.154 in | Over Current, Over Temperature, Under Voltage Lockout (UVLO) | |
Texas Instruments LP3892EMR-1.2/NOPBThe LP3892 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220, DDPAK/TO-263 and SO PowerPAD-8 packages.
Dropout Voltage:140mV (typ) at 1.5A load current.
Ground Pin Current:3 mA (typ) at full load.
Shutdown Current:60 nA (typ) when S/D pin is low.
Precision Output Voltage:1.5% room temperature accuracy.
The LP3892 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220, DDPAK/TO-263 and SO PowerPAD-8 packages.
Dropout Voltage:140mV (typ) at 1.5A load current.
Ground Pin Current:3 mA (typ) at full load.
Shutdown Current:60 nA (typ) when S/D pin is low.
Precision Output Voltage:1.5% room temperature accuracy. | Positive | Enable | 5.5 V | 30 µA | 8 mA | 80 dB | 65 dB | 1 | 125 °C | -40 °C | 0.55 V | Surface Mount | 27.03 °C/W | 1.2 V | 8-SO PowerPad | 1.5 A | 3.9 mm | 8-PowerSOIC | 0.154 in | Over Current, Over Temperature, Short Circuit | |
Texas Instruments LP3892EMRX-1.2Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A 8-SO PowerPad | Positive | Enable | 5.5 V | 30 µA | 8 mA | 80 dB | 65 dB | 1 | 125 °C | -40 °C | 0.55 V | Surface Mount | 27.03 °C/W | 1.2 V | 8-SO PowerPad | 1.5 A | 3.9 mm | 8-PowerSOIC | 0.154 in | Over Current, Over Temperature, Short Circuit | |
Texas Instruments LP3892ESX-1.5/NOPBThe LP3892 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220, DDPAK/TO-263 and SO PowerPAD-8 packages.
Dropout Voltage:140mV (typ) at 1.5A load current.
Ground Pin Current:3 mA (typ) at full load.
Shutdown Current:60 nA (typ) when S/D pin is low.
Precision Output Voltage:1.5% room temperature accuracy.
The LP3892 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220, DDPAK/TO-263 and SO PowerPAD-8 packages.
Dropout Voltage:140mV (typ) at 1.5A load current.
Ground Pin Current:3 mA (typ) at full load.
Shutdown Current:60 nA (typ) when S/D pin is low.
Precision Output Voltage:1.5% room temperature accuracy. | Positive | Enable | 5.5 V | 30 µA | 8 mA | 80 dB | 65 dB | 1 | 125 °C | -40 °C | Surface Mount | 27.03 °C/W | 1.5 V | TO-263 (DDPAK-5) | 1.5 A | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | Over Current, Over Temperature, Under Voltage Lockout (UVLO) | 0.5 V | |||
Texas Instruments LP3892ES-1.5/NOPBThe LP3892 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220, DDPAK/TO-263 and SO PowerPAD-8 packages.
Dropout Voltage:140mV (typ) at 1.5A load current.
Ground Pin Current:3 mA (typ) at full load.
Shutdown Current:60 nA (typ) when S/D pin is low.
Precision Output Voltage:1.5% room temperature accuracy.
The LP3892 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220, DDPAK/TO-263 and SO PowerPAD-8 packages.
Dropout Voltage:140mV (typ) at 1.5A load current.
Ground Pin Current:3 mA (typ) at full load.
Shutdown Current:60 nA (typ) when S/D pin is low.
Precision Output Voltage:1.5% room temperature accuracy. | Positive | Enable | 5.5 V | 30 µA | 8 mA | 80 dB | 65 dB | 1 | 125 °C | -40 °C | Surface Mount | 27.03 °C/W | 1.5 V | TO-263 (DDPAK-5) | 1.5 A | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | Over Current, Over Temperature, Under Voltage Lockout (UVLO) | 0.5 V | |||
Texas Instruments LP3892EMRX-1.5Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A 8-SO PowerPad | Positive | Enable | 5.5 V | 30 µA | 8 mA | 80 dB | 65 dB | 1 | 125 °C | -40 °C | 0.55 V | Surface Mount | 27.03 °C/W | 1.5 V | 8-SO PowerPad | 1.5 A | 3.9 mm | 8-PowerSOIC | 0.154 in | Over Current, Over Temperature, Under Voltage Lockout (UVLO) | |
Texas Instruments LP3892ESX-1.8/NOPBLinear Voltage Regulator IC Positive Fixed 1 Output 1.5A TO-263 (DDPAK-5) | Positive | Enable | 5.5 V | 30 µA | 8 mA | 80 dB | 65 dB | 1 | 125 °C | -40 °C | 0.5 V | Surface Mount | 27.03 °C/W | 1.8 V | TO-263 (DDPAK-5) | 1.5 A | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | Over Current, Over Temperature, Short Circuit | |||
Texas Instruments LP3892EMR-1.2Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A 8-SO PowerPad | Positive | Enable | 5.5 V | 30 µA | 8 mA | 80 dB | 65 dB | 1 | 125 °C | -40 °C | 0.55 V | Surface Mount | 27.03 °C/W | 1.2 V | 8-SO PowerPad | 1.5 A | 3.9 mm | 8-PowerSOIC | 0.154 in | Over Current, Over Temperature, Short Circuit | |
Texas Instruments LP3892ESX-1.2Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A TO-263 (DDPAK-5) | Positive | Enable | 5.5 V | 30 µA | 8 mA | 80 dB | 65 dB | 1 | 125 °C | -40 °C | 0.5 V | Surface Mount | 27.03 °C/W | 1.2 V | TO-263 (DDPAK-5) | 1.5 A | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | Over Current, Over Temperature, Short Circuit | |||
Positive | Enable | 5.5 V | 30 µA | 8 mA | 80 dB | 65 dB | 1 | 125 °C | -40 °C | Through Hole | 27.03 °C/W | 1.5 V | TO-220-5 | 1.5 A | TO-220-5 Formed Leads | Over Current, Over Temperature, Under Voltage Lockout (UVLO) | 0.5 V | ||||
Positive | Enable | 5.5 V | 30 µA | 8 mA | 80 dB | 65 dB | 1 | 125 °C | -40 °C | 0.5 V | Through Hole | 27.03 °C/W | 1.2 V | TO-220-5 | 1.5 A | TO-220-5 Formed Leads | Over Current, Over Temperature, Short Circuit | ||||
Texas Instruments LP3892ES-1.2/NOPBThe LP3892 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220, DDPAK/TO-263 and SO PowerPAD-8 packages.
Dropout Voltage:140mV (typ) at 1.5A load current.
Ground Pin Current:3 mA (typ) at full load.
Shutdown Current:60 nA (typ) when S/D pin is low.
Precision Output Voltage:1.5% room temperature accuracy.
The LP3892 is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220, DDPAK/TO-263 and SO PowerPAD-8 packages.
Dropout Voltage:140mV (typ) at 1.5A load current.
Ground Pin Current:3 mA (typ) at full load.
Shutdown Current:60 nA (typ) when S/D pin is low.
Precision Output Voltage:1.5% room temperature accuracy. | Positive | Enable | 5.5 V | 30 µA | 8 mA | 80 dB | 65 dB | 1 | 125 °C | -40 °C | 0.5 V | Surface Mount | 27.03 °C/W | 1.2 V | TO-263 (DDPAK-5) | 1.5 A | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | Over Current, Over Temperature, Short Circuit |
Description
General part information
LP3892 Series
Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A TO-220-5