SN74HC4066N

Active

Texas Instruments

5V, 1:1 (SPST), 4-CHANNEL ANALOG SWITCH 14-PDIP -40 TO 85

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsSN74HC4066 Quadruple Bilateral Analog Switch datasheet (Rev. K)Datasheet +1

SN74HC4066N

Active

Texas Instruments

5V, 1:1 (SPST), 4-CHANNEL ANALOG SWITCH 14-PDIP -40 TO 85

Deep-Dive with AI

DocumentsSN74HC4066 Quadruple Bilateral Analog Switch datasheet (Rev. K)Datasheet +1

Specifications Pricing Series Description Documents

Technical Specifications

Parameters and characteristics commom to parts in this series

Specification	SN74HC4066N	SN74HC4066 Series

-3db Bandwidth	30 MHz	30 MHz
Crosstalk	-45 dB	-45 dB
Current - Leakage (IS(off)) (Max) [Max]	100 nA	100 nA
Mounting Type	Through Hole	Surface Mount, Through Hole
Multiplexer/Demultiplexer Circuit	1:1	1:1
Number of Circuits	4	4
On-State Resistance (Max) [Max]	30 Ohm	30 Ohm
Operating Temperature [Max]	85 °C	85 °C
Operating Temperature [Min]	-40 °C	-40 °C
Package / Case	14-DIP	14-SOIC, 14-DIP, 14-TSSOP, 14-SSOP
Package / Case	7.62 mm	3.9 - 7.62 mm
Package / Case	0.3 in	0.154 - 5.3 in
Package / Case	-	0.173 in
Package / Case	-	4.4 mm
Package / Case	-	5.3 mm
Package / Case	-	0.209 in
Package / Case	-	0.209 in
Supplier Device Package	-	14-TSSOP, 14-SO, 14-SSOP
Switch Circuit	SPST - NO	SPST - NO
Switch Time (Ton, Toff) (Max) [custom]	34 ns	34 ns
Switch Time (Ton, Toff) (Max) [custom]	31 ns	31 ns
Voltage - Supply, Single (V+) [Max]	6 V	6 V
Voltage - Supply, Single (V+) [Min]	2 V	2 V

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Chip1Stop	N/A	5	$ 0.52
		50	$ 0.32
		100	$ 0.26
		200	$ 0.26
		500	$ 0.25
Component Electronics, Inc	N/A	1	$ 0.77
		100	$ 0.58
		1000	$ 0.50
DigiKey	N/A	1	$ 0.56
		10	$ 0.40
		25	$ 0.35
		100	$ 0.31
		250	$ 0.29
		500	$ 0.27
		1000	$ 0.26
		1208	$ 0.25
		2500	$ 0.25
		5000	$ 0.24
Digikey	Tube	1	$ 0.65
		10	$ 0.57
		25	$ 0.54
		100	$ 0.44
		250	$ 0.41
		500	$ 0.35
		1000	$ 0.28
		2500	$ 0.25
		5000	$ 0.23
Mouser Electronics	N/A	1	$ 0.56
		10	$ 0.35
		100	$ 0.28
		500	$ 0.27
		1000	$ 0.25
		2500	$ 0.23
		5000	$ 0.23
		10000	$ 0.23
Quest Components	N/A	1	$ 0.48
		1	$ 0.91
		23	$ 0.27
		184	$ 0.18
Rochester Electronics	N/A	1	$ 0.24
		25	$ 0.23
		100	$ 0.22
		500	$ 0.21
		1000	$ 0.20
TME	N/A	3	$ 0.39
		10	$ 0.38
		50	$ 0.34
		150	$ 0.30
		500	$ 0.25
Texas Instruments	TUBE	1	$ 0.54
		100	$ 0.37
		250	$ 0.28
		1000	$ 0.19
Verical	N/A	1478	$ 0.25
		1478	$ 0.25
		1478	$ 0.25
		1478	$ 0.25
		1478	$ 0.25
Win Source Electronics	N/A	1	$ 0.17
		95	$ 0.54
		95	$ 0.54
		225	$ 0.45
		225	$ 0.45
		350	$ 0.43
		350	$ 0.43
		480	$ 0.42
		480	$ 0.42
		625	$ 0.40
		625	$ 0.40
		830	$ 0.36
		830	$ 0.36

SN74HC4066 Series

5V, 1:1 (SPST), 4-channel analog switch

Part	Switch Time (Ton, Toff) (Max) [custom]	Switch Time (Ton, Toff) (Max) [custom]	On-State Resistance (Max) [Max]	Switch Circuit	-3db Bandwidth	Multiplexer/Demultiplexer Circuit	Mounting Type	Operating Temperature [Max]	Operating Temperature [Min]	Crosstalk	Current - Leakage (IS(off)) (Max) [Max]	Package / Case	Package / Case	Package / Case	Voltage - Supply, Single (V+) [Min]	Voltage - Supply, Single (V+) [Max]	Number of Circuits	Package / Case [custom]	Package / Case [custom]	Supplier Device Package	Package / Case [y]	Package / Case [y]	Package / Case
Texas Instruments SN74HC4066DR The SN74HC4066 device is a silicon-gate CMOS quadruple analog switch designed to handle both analog and digital signals. Each switch permits signals with amplitudes of up to 6V (peak) to be transmitted in either direction. Each switch section has its own enable input control (C). A high-level voltage applied to C turns on the associated switch section. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems. The SN74HC4066 device is a silicon-gate CMOS quadruple analog switch designed to handle both analog and digital signals. Each switch permits signals with amplitudes of up to 6V (peak) to be transmitted in either direction. Each switch section has its own enable input control (C). A high-level voltage applied to C turns on the associated switch section. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems.	34 ns	31 ns	30 Ohm	SPST - NO	30 MHz	1:1	Surface Mount	85 °C	-40 °C	-45 dB	100 nA	3.9 mm	0.154 in	14-SOIC	2 V	6 V	4
Texas Instruments SN74HC4066D The SN74HC4066 device is a silicon-gate CMOS quadruple analog switch designed to handle both analog and digital signals. Each switch permits signals with amplitudes of up to 6V (peak) to be transmitted in either direction. Each switch section has its own enable input control (C). A high-level voltage applied to C turns on the associated switch section. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems. The SN74HC4066 device is a silicon-gate CMOS quadruple analog switch designed to handle both analog and digital signals. Each switch permits signals with amplitudes of up to 6V (peak) to be transmitted in either direction. Each switch section has its own enable input control (C). A high-level voltage applied to C turns on the associated switch section. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems.	34 ns	31 ns	30 Ohm	SPST - NO	30 MHz	1:1	Surface Mount	85 °C	-40 °C	-45 dB	100 nA	3.9 mm	0.154 in	14-SOIC	2 V	6 V	4
Texas Instruments SN74HC4066DT The SN74HC4066 device is a silicon-gate CMOS quadruple analog switch designed to handle both analog and digital signals. Each switch permits signals with amplitudes of up to 6V (peak) to be transmitted in either direction. Each switch section has its own enable input control (C). A high-level voltage applied to C turns on the associated switch section. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems. The SN74HC4066 device is a silicon-gate CMOS quadruple analog switch designed to handle both analog and digital signals. Each switch permits signals with amplitudes of up to 6V (peak) to be transmitted in either direction. Each switch section has its own enable input control (C). A high-level voltage applied to C turns on the associated switch section. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems.	34 ns	31 ns	30 Ohm	SPST - NO	30 MHz	1:1	Surface Mount	85 °C	-40 °C	-45 dB	100 nA	3.9 mm	0.154 in	14-SOIC	2 V	6 V	4
Texas Instruments SN74HC4066N The SN74HC4066 device is a silicon-gate CMOS quadruple analog switch designed to handle both analog and digital signals. Each switch permits signals with amplitudes of up to 6V (peak) to be transmitted in either direction. Each switch section has its own enable input control (C). A high-level voltage applied to C turns on the associated switch section. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems. The SN74HC4066 device is a silicon-gate CMOS quadruple analog switch designed to handle both analog and digital signals. Each switch permits signals with amplitudes of up to 6V (peak) to be transmitted in either direction. Each switch section has its own enable input control (C). A high-level voltage applied to C turns on the associated switch section. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems.	34 ns	31 ns	30 Ohm	SPST - NO	30 MHz	1:1	Through Hole	85 °C	-40 °C	-45 dB	100 nA	7.62 mm	0.3 in	14-DIP	2 V	6 V	4
Texas Instruments SN74HC4066PW The SN74HC4066 device is a silicon-gate CMOS quadruple analog switch designed to handle both analog and digital signals. Each switch permits signals with amplitudes of up to 6V (peak) to be transmitted in either direction. Each switch section has its own enable input control (C). A high-level voltage applied to C turns on the associated switch section. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems. The SN74HC4066 device is a silicon-gate CMOS quadruple analog switch designed to handle both analog and digital signals. Each switch permits signals with amplitudes of up to 6V (peak) to be transmitted in either direction. Each switch section has its own enable input control (C). A high-level voltage applied to C turns on the associated switch section. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems.	34 ns	31 ns	30 Ohm	SPST - NO	30 MHz	1:1	Surface Mount	85 °C	-40 °C	-45 dB	100 nA			14-TSSOP	2 V	6 V	4	0.173 in	4.4 mm	14-TSSOP
Texas Instruments SN74HC4066NSR The SN74HC4066 device is a silicon-gate CMOS quadruple analog switch designed to handle both analog and digital signals. Each switch permits signals with amplitudes of up to 6V (peak) to be transmitted in either direction. Each switch section has its own enable input control (C). A high-level voltage applied to C turns on the associated switch section. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems. The SN74HC4066 device is a silicon-gate CMOS quadruple analog switch designed to handle both analog and digital signals. Each switch permits signals with amplitudes of up to 6V (peak) to be transmitted in either direction. Each switch section has its own enable input control (C). A high-level voltage applied to C turns on the associated switch section. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems.	34 ns	31 ns	30 Ohm	SPST - NO	30 MHz	1:1	Surface Mount	85 °C	-40 °C	-45 dB	100 nA			14-SOIC	2 V	6 V	4			14-SO	5.3 mm	0.209 in
Texas Instruments SN74HC4066PWR The SN74HC4066 device is a silicon-gate CMOS quadruple analog switch designed to handle both analog and digital signals. Each switch permits signals with amplitudes of up to 6V (peak) to be transmitted in either direction. Each switch section has its own enable input control (C). A high-level voltage applied to C turns on the associated switch section. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems. The SN74HC4066 device is a silicon-gate CMOS quadruple analog switch designed to handle both analog and digital signals. Each switch permits signals with amplitudes of up to 6V (peak) to be transmitted in either direction. Each switch section has its own enable input control (C). A high-level voltage applied to C turns on the associated switch section. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems.	34 ns	31 ns	30 Ohm	SPST - NO	30 MHz	1:1	Surface Mount	85 °C	-40 °C	-45 dB	100 nA			14-TSSOP	2 V	6 V	4	0.173 in	4.4 mm	14-TSSOP
Texas Instruments SN74HC4066DBR The SN74HC4066 device is a silicon-gate CMOS quadruple analog switch designed to handle both analog and digital signals. Each switch permits signals with amplitudes of up to 6V (peak) to be transmitted in either direction. Each switch section has its own enable input control (C). A high-level voltage applied to C turns on the associated switch section. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems. The SN74HC4066 device is a silicon-gate CMOS quadruple analog switch designed to handle both analog and digital signals. Each switch permits signals with amplitudes of up to 6V (peak) to be transmitted in either direction. Each switch section has its own enable input control (C). A high-level voltage applied to C turns on the associated switch section. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems.	34 ns	31 ns	30 Ohm	SPST - NO	30 MHz	1:1	Surface Mount	85 °C	-40 °C	-45 dB	100 nA		5.3 mm	14-SSOP	2 V	6 V	4			14-SSOP			0.209 in

Description

General part information

SN74HC4066 Series

The SN74HC4066 device is a silicon-gate CMOS quadruple analog switch designed to handle both analog and digital signals. Each switch permits signals with amplitudes of up to 6V (peak) to be transmitted in either direction.

Each switch section has its own enable input control (C). A high-level voltage applied to C turns on the associated switch section.

Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems.