Zenode.ai Logo
TPS54810EVM-213 - TPS54810EVM-213

TPS54810EVM-213

Active
Texas Instruments

8-A; 4-6 VIN DC/DC CONVERTER WITH CERAMIC CAPACITORS AND ADJUSTABLE OUTPUT

Deep-Dive with AI

Search across all available documentation for this part.

TPS54810EVM-213 - TPS54810EVM-213

TPS54810EVM-213

Active
Texas Instruments

8-A; 4-6 VIN DC/DC CONVERTER WITH CERAMIC CAPACITORS AND ADJUSTABLE OUTPUT

Deep-Dive with AI

Technical Specifications

Parameters and characteristics commom to parts in this series

SpecificationTPS54810EVM-213TPS54810 Series
Board TypeFully PopulatedFully Populated
Current - Output8 A8 A
Frequency - Switching700 kHz350 - 700 kHz
Function-Step-Down
Main PurposeDC/DC, Step DownDC/DC, Step Down
Mounting Type-Surface Mount
Number of Outputs-1
Operating Temperature-85 °C
Operating Temperature--40 °C
Output Configuration-Positive
Output Type-Adjustable
Outputs and TypeNon-IsolatedNon-Isolated
Outputs and Type11
Package / Case-28-PowerTSSOP
Supplied ContentsBoard(s)Board(s)
Supplier Device Package-28-HTSSOP
Synchronous Rectifier-True
Topology-Buck
Utilized IC / PartTPS54810TPS54810
Voltage - Input (Max)-6 V
Voltage - Input (Min)-4 V
Voltage - Input [Max]6 V6 V
Voltage - Input [Min]4 V4 V
Voltage - Output1.8 V1.8 V
Voltage - Output (Max)-3.3 V
Voltage - Output (Min/Fixed)-0.9 V

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

TPS54810 Series

8-A; 4-6 VIN DC/DC CONVERTER WITH CERAMIC CAPACITORS AND ADJUSTABLE OUTPUT

PartMain PurposeFrequency - SwitchingSupplied ContentsVoltage - Input [Min]Voltage - Input [Max]Board TypeUtilized IC / PartOutputs and TypeOutputs and TypeVoltage - OutputCurrent - OutputVoltage - Input (Min) [Min]FunctionSynchronous RectifierNumber of OutputsPackage / CaseVoltage - Output (Min/Fixed) [Min]Output ConfigurationMounting TypeSupplier Device PackageTopologyVoltage - Output (Max) [Max]Operating Temperature [Max]Operating Temperature [Min]Output TypeVoltage - Input (Max) [Max]
Texas Instruments
TPS54810EVM-213
TPS54810 SWIFT™ DC/DC, Step Down 1, Non-Isolated Outputs Evaluation Board
DC/DC, Step Down
700 kHz
Board(s)
4 V
6 V
Fully Populated
TPS54810
Non-Isolated
1
1.8 V
8 A
Texas Instruments
TPS54810PWPRG4
Buck Switching Regulator IC Positive Adjustable 0.9V 1 Output 8A 28-PowerTSSOP (0.173", 4.40mm Width)
350 kHz, 550 kHz
8 A
4 V
Step-Down
1
28-PowerTSSOP
0.9 V
Positive
Surface Mount
28-HTSSOP
Buck
3.3 V
85 °C
-40 °C
Adjustable
6 V
Texas Instruments
TPS54810PWP
As a member of the SWIFT™ family of dc/dc regulators, the TPS54810 low-input voltage high-output current synchronous buck PWM converter integrates all required active components. Included on the substrate with the listed features are a true, high performance, voltage error amplifier that enables maximum performance under transient conditions and flexibility in choosing the output filter L and C components; an under-voltage-lockout circuit to prevent start-up until the input voltage reaches 3.8 V; an internally or externally set slow-start circuit to limit in-rush currents; and a power good output useful for processor/logic reset, fault signaling, and supply sequencing. The TPS54810 is available in a thermally enhanced 28-pin TSSOP (PWP) PowerPAD™ package, which eliminates bulky heatsinks. TI provides evaluation modules and the SWIFT™ designer software tool to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles. As a member of the SWIFT™ family of dc/dc regulators, the TPS54810 low-input voltage high-output current synchronous buck PWM converter integrates all required active components. Included on the substrate with the listed features are a true, high performance, voltage error amplifier that enables maximum performance under transient conditions and flexibility in choosing the output filter L and C components; an under-voltage-lockout circuit to prevent start-up until the input voltage reaches 3.8 V; an internally or externally set slow-start circuit to limit in-rush currents; and a power good output useful for processor/logic reset, fault signaling, and supply sequencing. The TPS54810 is available in a thermally enhanced 28-pin TSSOP (PWP) PowerPAD™ package, which eliminates bulky heatsinks. TI provides evaluation modules and the SWIFT™ designer software tool to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.
350 kHz, 550 kHz
8 A
4 V
Step-Down
1
28-PowerTSSOP
0.9 V
Positive
Surface Mount
28-HTSSOP
Buck
3.3 V
85 °C
-40 °C
Adjustable
6 V
Texas Instruments
TPS54810PWPR
As a member of the SWIFT™ family of dc/dc regulators, the TPS54810 low-input voltage high-output current synchronous buck PWM converter integrates all required active components. Included on the substrate with the listed features are a true, high performance, voltage error amplifier that enables maximum performance under transient conditions and flexibility in choosing the output filter L and C components; an under-voltage-lockout circuit to prevent start-up until the input voltage reaches 3.8 V; an internally or externally set slow-start circuit to limit in-rush currents; and a power good output useful for processor/logic reset, fault signaling, and supply sequencing. The TPS54810 is available in a thermally enhanced 28-pin TSSOP (PWP) PowerPAD™ package, which eliminates bulky heatsinks. TI provides evaluation modules and the SWIFT™ designer software tool to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles. As a member of the SWIFT™ family of dc/dc regulators, the TPS54810 low-input voltage high-output current synchronous buck PWM converter integrates all required active components. Included on the substrate with the listed features are a true, high performance, voltage error amplifier that enables maximum performance under transient conditions and flexibility in choosing the output filter L and C components; an under-voltage-lockout circuit to prevent start-up until the input voltage reaches 3.8 V; an internally or externally set slow-start circuit to limit in-rush currents; and a power good output useful for processor/logic reset, fault signaling, and supply sequencing. The TPS54810 is available in a thermally enhanced 28-pin TSSOP (PWP) PowerPAD™ package, which eliminates bulky heatsinks. TI provides evaluation modules and the SWIFT™ designer software tool to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.
350 kHz, 550 kHz
8 A
4 V
Step-Down
1
28-PowerTSSOP
0.9 V
Positive
Surface Mount
28-HTSSOP
Buck
3.3 V
85 °C
-40 °C
Adjustable
6 V

Description

General part information

TPS54810 Series

TPS54810 SWIFT™ DC/DC, Step Down 1, Non-Isolated Outputs Evaluation Board

Documents

Technical documentation and resources