Catalog(3 parts)
| Part | Main Purpose | Frequency - Switching▲▼ | Supplied Contents | Voltage - Input▲▼ | Voltage - Input▲▼ | Board Type | Utilized IC / Part | Outputs and Type | Outputs and Type▲▼ | Voltage - Output▲▼ | Current - Output▲▼ | Voltage - Input (Min)▲▼ | Function | Synchronous Rectifier▲▼ | Number of Outputs▲▼ | Package / Case | Voltage - Output (Min/Fixed)▲▼ | Output Configuration | Mounting Type | Supplier Device Package | Topology | Voltage - Output (Max)▲▼ | Operating Temperature▲▼ | Operating Temperature▲▼ | Output Type | Voltage - Input (Max)▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS54810EVM-213TPS54810 SWIFT™ DC/DC, Step Down 1, Non-Isolated Outputs Evaluation Board | DC/DC, Step Down | 700000 Hz | Board(s) | 4 V | 6 V | Fully Populated | TPS54810 | Non-Isolated | 1 ul | 1.7999999523162842 V | 8 A | |||||||||||||||
Texas Instruments TPS54810PWPRG4Buck Switching Regulator IC Positive Adjustable 0.9V 1 Output 8A 28-PowerTSSOP (0.173", 4.40mm Width) | 350000 Hz, 550000 Hz | 8 A | 4 V | Step-Down | 1 ul | 28-PowerTSSOP | 0.8999999761581421 V | Positive | Surface Mount | 28-HTSSOP | Buck | 3.299999952316284 V | 85 °C | -40 °C | Adjustable | 6 V | ||||||||||
Texas Instruments TPS54810PWPBuck Switching Regulator IC Positive Adjustable 0.9V 1 Output 8A 28-PowerTSSOP (0.173", 4.40mm Width) | 350000 Hz, 550000 Hz | 8 A | 4 V | Step-Down | 1 ul | 28-PowerTSSOP | 0.8999999761581421 V | Positive | Surface Mount | 28-HTSSOP | Buck | 3.299999952316284 V | 85 °C | -40 °C | Adjustable | 6 V |
Key Features
• 30-mMOSFET Switches for High Efficiency at 8-A Continuous Output0.9-V to 3.3-V Adjustable Output Voltage Range With 1% AccuracyExternally CompensatedFast Transient ResponseWide PWM Frequency:Fixed 350 kHz, 550 kHz orAdjustable 280 kHz to 700 kHzLoad Protected by Peak Current Limit and Thermal ShutdownIntegrated Solution Reduces Board Area and Total CostAPPLICATIONSLow-Voltage, High-Density Systems With Power Distributed at 5 VPoint of Load Regulation for High Performance DSPs, FPGAs, ASICs and MicroprocessorsBroadband, Networking, and Optical Communications InfrastructurePortable Computing/Notebook PCsPowerPAD and SWIFT are trademarks of Texas Instruments.30-mMOSFET Switches for High Efficiency at 8-A Continuous Output0.9-V to 3.3-V Adjustable Output Voltage Range With 1% AccuracyExternally CompensatedFast Transient ResponseWide PWM Frequency:Fixed 350 kHz, 550 kHz orAdjustable 280 kHz to 700 kHzLoad Protected by Peak Current Limit and Thermal ShutdownIntegrated Solution Reduces Board Area and Total CostAPPLICATIONSLow-Voltage, High-Density Systems With Power Distributed at 5 VPoint of Load Regulation for High Performance DSPs, FPGAs, ASICs and MicroprocessorsBroadband, Networking, and Optical Communications InfrastructurePortable Computing/Notebook PCsPowerPAD and SWIFT are trademarks of Texas Instruments.
Description
AI
As a member of the SWIFT™ family of dc/dc regulators, the TPS54810 low-input voltage high-output current synchronous buck PWM converter integrates all required active components. Included on the substrate with the listed features are a true, high performance, voltage error amplifier that enables maximum performance under transient conditions and flexibility in choosing the output filter L and C components; an under-voltage-lockout circuit to prevent start-up until the input voltage reaches 3.8 V; an internally or externally set slow-start circuit to limit in-rush currents; and a power good output useful for processor/logic reset, fault signaling, and supply sequencing.
The TPS54810 is available in a thermally enhanced 28-pin TSSOP (PWP) PowerPAD™ package, which eliminates bulky heatsinks. TI provides evaluation modules and the SWIFT™ designer software tool to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.
As a member of the SWIFT™ family of dc/dc regulators, the TPS54810 low-input voltage high-output current synchronous buck PWM converter integrates all required active components. Included on the substrate with the listed features are a true, high performance, voltage error amplifier that enables maximum performance under transient conditions and flexibility in choosing the output filter L and C components; an under-voltage-lockout circuit to prevent start-up until the input voltage reaches 3.8 V; an internally or externally set slow-start circuit to limit in-rush currents; and a power good output useful for processor/logic reset, fault signaling, and supply sequencing.
The TPS54810 is available in a thermally enhanced 28-pin TSSOP (PWP) PowerPAD™ package, which eliminates bulky heatsinks. TI provides evaluation modules and the SWIFT™ designer software tool to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.