Technical Specifications
Parameters and characteristics commom to parts in this series
| Specification | LP2987AILDX-5.0 | LP2987 Series |
|---|---|---|
| Control Features | Enable | Enable |
| Current - Output | 200 mA | 200 mA |
| Current - Quiescent (Iq) | 120 µA | 120 µA |
| Current - Supply (Max) [Max] | 3.7 mA | 3.7 mA |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Regulators | 1 | 1 |
| Operating Temperature [Max] | 125 °C | 125 °C |
| Operating Temperature [Min] | -40 °C | -40 °C |
| Output Configuration | Positive | Positive |
| Output Type | 27.03 °C/W | 27.03 °C/W |
| Package / Case | 8-WDFN Exposed Pad | 8-WDFN Exposed Pad, 8-SOIC, 8-TSSOP, 8-MSOP |
| Package / Case | - | 0.118 - 3.9 mm |
| Package / Case | - | 3 mm |
| Protection Features | Over Current, Short Circuit, Over Temperature | Over Current, Short Circuit, Over Temperature |
| PSRR | 65 dB | 65 dB |
| Supplier Device Package | 8-WSON (4x4) | 8-WSON (4x4), 8-SOIC |
| Voltage - Input (Max) [Max] | 16 V | 16 V |
| Voltage - Output (Min/Fixed) | 5 V | 2.5 - 5 V |
| Voltage Dropout (Max) [Max] | 0.35 V | 0.35 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
LP2987 Series
200-mA, 16-V, low-dropout voltage regulator with power good & enable
| Part | Current - Output | Output Type | Current - Quiescent (Iq) | Voltage - Input (Max) [Max] | Current - Supply (Max) [Max] | Package / Case | Supplier Device Package | Control Features | Output Configuration | Protection Features | Number of Regulators | PSRR | Voltage Dropout (Max) [Max] | Mounting Type | Operating Temperature [Max] | Operating Temperature [Min] | Voltage - Output (Min/Fixed) | Package / Case | Package / Case |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments LP2987AILD-5.0/NOPBThe LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.
The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.
Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:
Dropout Voltage:180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).
Ground Pin Current:1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).
Sleep Mode:The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.
Error Flag/Reset:The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.
Precision Output:Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with specified accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature.
The LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.
The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.
Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:
Dropout Voltage:180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).
Ground Pin Current:1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).
Sleep Mode:The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.
Error Flag/Reset:The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.
Precision Output:Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with specified accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature. | 200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-WDFN Exposed Pad | 8-WSON (4x4) | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 5 V | ||
200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-SOIC | 8-SOIC | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 3.3 V | 3.9 mm | ||
Texas Instruments LP2987IMX-5.0/NOPBThe LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.
The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.
Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:
Dropout Voltage:180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).
Ground Pin Current:1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).
Sleep Mode:The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.
Error Flag/Reset:The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.
Precision Output:Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with specified accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature.
The LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.
The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.
Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:
Dropout Voltage:180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).
Ground Pin Current:1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).
Sleep Mode:The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.
Error Flag/Reset:The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.
Precision Output:Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with specified accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature. | 200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-SOIC | 8-SOIC | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 5 V | 3.9 mm | |
200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-SOIC | 8-SOIC | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 3.3 V | 3.9 mm | ||
200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-SOIC | 8-SOIC | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 5 V | 3.9 mm | ||
200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-SOIC | 8-SOIC | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 2.8 V | 3.9 mm | ||
200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-SOIC | 8-SOIC | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 3.9 mm | |||
Texas Instruments LP2987IMM-5.0/NOPBThe LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.
The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.
Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:
Dropout Voltage:180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).
Ground Pin Current:1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).
Sleep Mode:The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.
Error Flag/Reset:The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.
Precision Output:Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with specified accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature.
The LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.
The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.
Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:
Dropout Voltage:180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).
Ground Pin Current:1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).
Sleep Mode:The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.
Error Flag/Reset:The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.
Precision Output:Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with specified accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature. | 200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-MSOP, 8-TSSOP | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 5 V | 0.118 in | 3 mm | |
200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-SOIC | 8-SOIC | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 2.5 V | 3.9 mm | ||
200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-SOIC | 8-SOIC | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 5 V | 3.9 mm | ||
200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-MSOP, 8-TSSOP | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 3.3 V | 0.118 in | 3 mm | ||
Texas Instruments LP2987IM-3.0/NOPBThe LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.
The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.
Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:
Dropout Voltage:180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).
Ground Pin Current:1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).
Sleep Mode:The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.
Error Flag/Reset:The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.
Precision Output:Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with specified accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature.
The LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.
The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.
Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:
Dropout Voltage:180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).
Ground Pin Current:1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).
Sleep Mode:The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.
Error Flag/Reset:The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.
Precision Output:Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with specified accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature. | 200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-SOIC | 8-SOIC | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 3.9 mm | ||
200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-SOIC | 8-SOIC | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 5 V | 3.9 mm | ||
200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-SOIC | 8-SOIC | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 5 V | 3.9 mm | ||
Texas Instruments LP2987IM-5.0/NOPBThe LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.
The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.
Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:
Dropout Voltage:180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).
Ground Pin Current:1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).
Sleep Mode:The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.
Error Flag/Reset:The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.
Precision Output:Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with specified accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature.
The LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.
The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.
Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:
Dropout Voltage:180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).
Ground Pin Current:1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).
Sleep Mode:The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.
Error Flag/Reset:The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.
Precision Output:Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with specified accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature. | 200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-SOIC | 8-SOIC | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 5 V | 3.9 mm | |
Texas Instruments LP2987AIMM-5.0/NOPBThe LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.
The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.
Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:
Dropout Voltage:180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).
Ground Pin Current:1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).
Sleep Mode:The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.
Error Flag/Reset:The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.
Precision Output:Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with specified accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature.
The LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.
The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.
Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:
Dropout Voltage:180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).
Ground Pin Current:1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).
Sleep Mode:The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.
Error Flag/Reset:The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.
Precision Output:Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with specified accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature. | 200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-MSOP, 8-TSSOP | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 5 V | 0.118 in | 3 mm | |
200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-MSOP, 8-TSSOP | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 3.3 V | 0.118 in | 3 mm | ||
Texas Instruments LP2987AILDX-5.0/NOPBThe LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.
The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.
Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:
Dropout Voltage:180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).
Ground Pin Current:1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).
Sleep Mode:The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.
Error Flag/Reset:The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.
Precision Output:Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with specified accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature.
The LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.
The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.
Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:
Dropout Voltage:180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).
Ground Pin Current:1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).
Sleep Mode:The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.
Error Flag/Reset:The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.
Precision Output:Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with specified accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature. | 200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-WDFN Exposed Pad | 8-WSON (4x4) | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 5 V | ||
Texas Instruments LP2987IMMX-5.0/NOPBLinear Voltage Regulator IC Positive Fixed 1 Output 200mA 8-VSSOP | 200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-MSOP, 8-TSSOP | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 5 V | 0.118 in | 3 mm | |
Texas Instruments LP2987IMMX-3.3/NOPBThe LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.
The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.
Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:
Dropout Voltage:180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).
Ground Pin Current:1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).
Sleep Mode:The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.
Error Flag/Reset:The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.
Precision Output:Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with specified accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature.
The LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.
The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.
Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:
Dropout Voltage:180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).
Ground Pin Current:1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).
Sleep Mode:The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.
Error Flag/Reset:The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.
Precision Output:Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with specified accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature. | 200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-MSOP, 8-TSSOP | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 3.3 V | 0.118 in | 3 mm | |
Texas Instruments LP2987AILDX-5.0Linear Voltage Regulator IC Positive Fixed 1 Output 200mA 8-WSON (4x4) | 200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-WDFN Exposed Pad | 8-WSON (4x4) | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 5 V | ||
Texas Instruments LP2987IMM-3.3/NOPBThe LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.
The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.
Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:
Dropout Voltage:180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).
Ground Pin Current:1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).
Sleep Mode:The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.
Error Flag/Reset:The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.
Precision Output:Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with specified accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature.
The LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.
The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.
Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:
Dropout Voltage:180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).
Ground Pin Current:1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).
Sleep Mode:The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.
Error Flag/Reset:The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.
Precision Output:Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with specified accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature. | 200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-MSOP, 8-TSSOP | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 3.3 V | 0.118 in | 3 mm | |
Texas Instruments LP2987AIMMX-5.0/NOPBLinear Voltage Regulator IC Positive Fixed 1 Output 200mA 8-VSSOP | 200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-MSOP, 8-TSSOP | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 5 V | 0.118 in | 3 mm | |
200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-SOIC | 8-SOIC | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 3.2 V | 3.9 mm | ||
Texas Instruments LP2987IM-3.3/NOPBThe LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.
The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.
Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:
Dropout Voltage:180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).
Ground Pin Current:1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).
Sleep Mode:The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.
Error Flag/Reset:The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.
Precision Output:Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with specified accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature.
The LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.
The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.
Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:
Dropout Voltage:180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).
Ground Pin Current:1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).
Sleep Mode:The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.
Error Flag/Reset:The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.
Precision Output:Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with specified accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature. | 200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-SOIC | 8-SOIC | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 3.3 V | 3.9 mm | |
200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-SOIC | 8-SOIC | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 3.9 mm | |||
200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-SOIC | 8-SOIC | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 3.8 V | 3.9 mm | ||
Texas Instruments LP2987AILD-3.0/NOPBThe LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.
The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.
Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:
Dropout Voltage:180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).
Ground Pin Current:1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).
Sleep Mode:The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.
Error Flag/Reset:The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.
Precision Output:Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with specified accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature.
The LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.
The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.
Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:
Dropout Voltage:180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).
Ground Pin Current:1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).
Sleep Mode:The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.
Error Flag/Reset:The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.
Precision Output:Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with specified accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature. | 200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-WDFN Exposed Pad | 8-WSON (4x4) | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | |||
200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-SOIC | 8-SOIC | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 3.3 V | 3.9 mm | ||
200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-SOIC | 8-SOIC | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 3.3 V | 3.9 mm | ||
200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-SOIC | 8-SOIC | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 3.2 V | 3.9 mm | ||
200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-SOIC | 8-SOIC | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 2.5 V | 3.9 mm | ||
Texas Instruments LP2987IMX-3.0/NOPBThe LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.
The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.
Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:
Dropout Voltage:180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).
Ground Pin Current:1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).
Sleep Mode:The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.
Error Flag/Reset:The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.
Precision Output:Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with specified accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature.
The LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.
The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.
Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:
Dropout Voltage:180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).
Ground Pin Current:1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).
Sleep Mode:The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.
Error Flag/Reset:The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.
Precision Output:Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with specified accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature. | 200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-SOIC | 8-SOIC | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 3.9 mm | ||
200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-SOIC | 8-SOIC | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 3.8 V | 3.9 mm | ||
Texas Instruments LP2987AIMX-5.0/NOPBThe LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.
The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.
Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:
Dropout Voltage:180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).
Ground Pin Current:1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).
Sleep Mode:The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.
Error Flag/Reset:The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.
Precision Output:Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with specified accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature.
The LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.
The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.
Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:
Dropout Voltage:180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).
Ground Pin Current:1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).
Sleep Mode:The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.
Error Flag/Reset:The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.
Precision Output:Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with specified accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature. | 200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-SOIC | 8-SOIC | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 5 V | 3.9 mm | |
200 mA | 27.03 °C/W | 120 µA | 16 V | 3.7 mA | 8-SOIC | 8-SOIC | Enable | Positive | Over Current, Over Temperature, Short Circuit | 1 | 65 dB | 0.35 V | Surface Mount | 125 °C | -40 °C | 3.9 mm |
Description
General part information
LP2987 Series
The LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.
The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.
Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance: