REG711EVM-232

Obsolete

Texas Instruments

EVAL MOD FOR REG711-5

Find alt

Alpha

REG711EVM-232

Obsolete

Texas Instruments

EVAL MOD FOR REG711-5

Find alt

Alpha

Description Specifications Series Pricing CAD Documents

Description

General part information

REG711 Series

The REG711 is a switched capacitor voltage converter, which produces a regulated, low ripple output voltage from an unregulated input voltage. A wide input supply voltage of 1.8V to 5.5V makes the REG711 ideal for a variety of battery sources, such as single cell Li-Ion, or two and three cell Nickel or Alkaline based chemistries.

The input voltage may vary above and below the output voltage and the output will remain in regulation. It works equally well for step up or down without the need for an inductor, providing low EMI DC/DC conversion. The high switching frequency allows the use of small surface-mount capacitors, saving board space and reducing cost. The REG711 is thermally protected and current limited, protecting the load and the regulator during fault conditions. Typical ground pin current (quiescent current) is 1mA at full load, 60uA with no load, and less than 1uA in shutdown mode. This regulator comes in a thin MSOP-8 package with a component height of less than 1.1mm.

Technical Specifications

Parameters and characteristics for this part

Specification	REG711EVM-232

Board Type	Fully Populated
Contents	Board
Current - Output	50 mA
Frequency - Switching	1 MHz
Main Purpose	Step Up or Down, DC/DC
Non-Isolated Output Count	1 count
Output Type	Non-Isolated
Regulator Topology	Buck-Boost
Supplied Contents	Board(s)
Total Output Count	1
Utilized IC / Part	REG711
Voltage - Input (Maximum)	5.5 V
Voltage - Input (Minimum)	2.7 V
Voltage - Output	5 VDC

REG711 Series

50mA Switched-Cap DC/DC Converter

Part	Supplied Contents	Total Output Count	Output Type	Non-Isolated Output Count	Board Type	Current - Output	Contents	Utilized IC / Part	Voltage - Output	Regulator Topology	Frequency - Switching	Main Purpose	Voltage - Input (Minimum)	Voltage - Input (Maximum)	Topology	Voltage - Output (Min/Fixed)	Synchronous Rectifier	Voltage - Input (Max)	Function	Package Name	Package Width	Package Length	Output Configuration	Voltage - Input (Min)	Number of Outputs	Mounting Type	Operating Temperature (Max)	Operating Temperature (Min)
Texas Instruments REG711EVM-232	Board(s)	1	Non-Isolated	1 count	Fully Populated	50 mA	Board	REG711	5 VDC	Buck-Boost	1 MHz	DC/DC Step Up or Down	2.7 V	5.5 V
Texas Instruments REG711EA-3.3/250			Fixed			50 mA					1 MHz				Charge Pump	3.3 V	No	5.5 V	Step-Down Step-Up	8-TSSOP 8-MSOP 8-VSSOP	3 mm	0.118 in	Positive	1.8 V	1	Surface Mount	85 °C	-40 °C
Texas Instruments REG711EA-5/250			Fixed			50 mA					1 MHz				Charge Pump	5 V	No	5.5 V	Step-Down Step-Up	8-TSSOP 8-MSOP 8-VSSOP	3 mm	0.118 in	Positive	2.7 V	1	Surface Mount	85 °C	-40 °C
Texas Instruments REG711EA-3.3/2K5			Fixed			50 mA					1 MHz				Charge Pump	3.3 V	No	5.5 V	Step-Down Step-Up	8-TSSOP 8-MSOP 8-VSSOP	3 mm	0.118 in	Positive	1.8 V	1	Surface Mount	85 °C	-40 °C
Texas Instruments REG711EA-3/2K5			Fixed			50 mA					1 MHz				Charge Pump	3 V	No	5.5 V	Step-Down Step-Up	8-TSSOP 8-MSOP 8-VSSOP	3 mm	0.118 in	Positive	1.8 V	1	Surface Mount	85 °C	-40 °C
Texas Instruments REG711EA-2.5/250			Fixed			50 mA					1 MHz				Charge Pump	2.5 V	No	5.5 V	Step-Down Step-Up	8-TSSOP 8-MSOP 8-VSSOP	3 mm	0.118 in	Positive	1.8 V	1	Surface Mount	85 °C	-40 °C
Texas Instruments REG711EA27250G4			Fixed			50 mA					1 MHz				Charge Pump	2.7 V	No	5.5 V	Step-Down Step-Up	8-TSSOP 8-MSOP 8-VSSOP	3 mm	0.118 in	Positive	1.8 V	1	Surface Mount	85 °C	-40 °C
Texas Instruments REG711EA-5/2K5			Fixed			50 mA					1 MHz				Charge Pump	5 V	No	5.5 V	Step-Down Step-Up	8-TSSOP 8-MSOP 8-VSSOP	3 mm	0.118 in	Positive	2.7 V	1	Surface Mount	85 °C	-40 °C
Texas Instruments REG711EA332K5G4			Fixed			50 mA					1 MHz				Charge Pump	3.3 V	No	5.5 V	Step-Down Step-Up	8-TSSOP 8-MSOP 8-VSSOP	3 mm	0.118 in	Positive	1.8 V	1	Surface Mount	85 °C	-40 °C
Texas Instruments REG711EA-3/250			Fixed			50 mA					1 MHz				Charge Pump	3 V	No	5.5 V	Step-Down Step-Up	8-TSSOP 8-MSOP 8-VSSOP	3 mm	0.118 in	Positive	1.8 V	1	Surface Mount	85 °C	-40 °C

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Create a free account to access distributor pricing data.

CAD

3D models and CAD resources for this part

Documents

Technical documentation and resources

No documents available